Manuel d'utilisation de l'interrupteur à télécommande d'éclairage par radiofréquence DieseRC

1. Produit terminéview

The DieseRC Radio Frequency Light Remote Control Switch system allows for wireless control of lights and other electrical appliances. It consists of a relay receiver and two remote control transmitters, operating on a 433MHz RF frequency. This manual provides instructions for installation, setup, and operation.

2. Contenu du colis

1 récepteur relais
2x Transmitters (with CR2016 batteries included)
1x Manuel du produit (ce document)

DieseRC RF Wireless Relay Receiver and two remote transmitters — Image 1: Contents of the DieseRC RF Wireless Relay Switch package, showing the receiver module, its protective casing, and two remote control transmitters.

3. Spécifications du produit

Paramètre	Valeur
Volume de travail du récepteurtage	CA 85 V à 240 V
Courant de repos	<5 mA
Max actuel	10A
Fréquence RF	433 MHz
Température de fonctionnement	-30°C ~ +80°C
Sensibilité de réception	> 97 dBm
Télécommandes de stockage	Jusqu'à 20 pièces
Prise en charge de l'encodage	1527 Apprendre le code
Mode de fonctionnement RF	Réception sans fil superhétérodyne ASK
Receiving Range (Open Space)	> 50 mètres
Configuration des broches	N / L
Modes de fonctionnement	Momentary / Toggle / Latched Mode
Batterie de l'émetteur	2x CR2016 (inclus)
Quoitage	1500 watts
Courant de commutation maximal	10 Amps

4. Installation

The receiver unit is designed for easy integration into existing electrical systems. It should be installed between the power supply and the device you wish to control (e.g., a lamp). The compact size (70*38*21 mm) allows for flexible placement. Ensure all power is disconnected before installation.

Diagram showing receiver installation between power and light — Image 2: Illustration of the receiver module connected between an AC 85V-250V power source and a light fixture, demonstrating a typical installation scenario.

The receiver is housed in a protective box for enhanced safety. No complex wiring is required for basic operation, but professional installation is recommended for those unfamiliar with electrical work.

5. Modes de fonctionnement

The receiver supports three distinct operating modes: Momentary, Toggle, and Latched. The desired mode must be set during the setup process.

5.1. Mode momentané

In Momentary Mode, the relay activates only while the remote button is pressed. ReleasinLe bouton g désactive le relais.

Press and hold one button on the transmitter: The connected device will turn ON.
Release the button: The connected device will turn OFF.

Diagram illustrating Momentary Mode operation — Image 3: Visual representation of Momentary Mode. Pressing and holding the remote button turns the light on; releasing it turns the light off.

5.2. Basculer entre les modes

In Toggle Mode, each press of the remote button alternates the relay's state (ON/OFF).

Press a button on the transmitter: The connected device will turn ON.
Appuyez sur le même button again: The connected device will turn OFF.

Note: The product is typically pre-set to Toggle Mode from the factory.

Diagram illustrating Toggle Mode operation — Image 4: Visual representation of Toggle Mode. Each press of the remote button alternates the light's state between on and off.

5.3. Mode verrouillé

Latched Mode requires two distinct buttons on the remote: one for ON and one for OFF.

Press the "ON" button: The connected device will turn ON.
Press the "OFF" button: The connected device will turn OFF.

Note: This mode requires a remote with at least two distinct buttons for ON/OFF functionality.

Diagram illustrating Latched Mode operation — Image 5: Visual representation of Latched Mode. One remote button turns the light on, and a separate button turns it off.

6. Configuration et appairage

To pair a transmitter with the receiver and set the operating mode, follow these steps:

6.1. Pairing for Momentary Mode

Appuyez sur le bouton d'apprentissage du récepteur 1 fois.
Attendez environ 3 secondes.
Press any button on the transmitter. The pairing is successful.

Setup diagram for Momentary Mode — Image 6: Step-by-step guide for setting up Momentary Mode, showing the learning button press and remote pairing.

6.2. Pairing for Toggle Mode

Appuyez sur le bouton d'apprentissage du récepteur 2 fois.
Attendez environ 3 secondes.
Press any button on the transmitter. The pairing is successful.

Setup diagram for Toggle Mode — Image 7: Step-by-step guide for setting up Toggle Mode, showing the learning button press and remote pairing.

6.3. Pairing for Latched Mode

Appuyez sur le bouton d'apprentissage du récepteur 3 fois.
Attendez environ 3 secondes.
Press the desired "ON" button on the transmitter.
Press the desired "OFF" button on the transmitter. The pairing is successful.

Note: For Latched Mode, you need a transmitter with at least two distinct buttons to assign ON and OFF functions.

Setup diagram for Latched Mode — Image 8: Step-by-step guide for setting up Latched Mode, showing the learning button press and pairing of two remote buttons for ON/OFF.

7. Réinitialisation du récepteur

Pour effacer tous les émetteurs appariés de la mémoire du récepteur :

Appuyez sur le bouton d'apprentissage du récepteur 8 fois consécutivement.
La réinitialisation est réussie.

Important: After a reset, all previously paired remote controls will no longer function with this receiver. You will need to re-pair them following the setup instructions above.

8. Product Features and Applications

The DieseRC RF Wireless Relay Module offers robust performance and versatility:

Signal fort : The 433MHz radio frequency signal can penetrate walls, floors, and doors, providing reliable control within a 50-meter range in open areas.
High Capacity Relay: Equipé d'un 10 Amp relay, it can handle high-power electrical appliances up to 1500W.
Composants durables : The high-quality relay is rated for over 400,000 operations, and the remote control transmitter buttons are designed for over 500,000 clicks.
Vol largetagCompatibilité : The receiver supports AC 85V~250V, making it suitable for 110V, 220V, 230V, and 240V systems.
Conception compacte : The mini size of the receiver (70*38*21 mm) and the portable key-fob style transmitters ensure convenience and discreet installation.

Various applications of the wireless relay module — Image 9 : Exampdes applications, notamment les projecteurs LED, lamps, general lighting, ventilation systems, and electric fans.

This system is suitable for a wide range of applications in homes, farms, factories, offices, laboratories, and supermarkets. It can remotely control various devices such as lamps, lighting fixtures, ventilation equipment, food waste disposers, and other DIY wireless projects.

Remote control of lights in a modern home setting — Image 10: Depiction of the remote control system managing lights in a large residential setting, highlighting the 50-meter remote control distance.

Remote control used in various rooms of a house — Image 11: The remote control being used to operate lights in a bedroom, living room, and dining room, emphasizing convenience.

Miniature remote control in a car console — Image 12: The compact remote control shown in a car's center console, illustrating its portability and ease of carrying.

Single switch controlling multiple lamps in a large space — Image 13 : Un example of one remote switch controlling multiple lamps across different areas like a living room, hallway, and swimming pool area.

9. Transmitter Details

The remote control transmitter features a simple design for ease of use.

Détaillé view of the remote control transmitter and receiver board — Image 14 : Détail view of the remote control transmitter, highlighting its indicator light, soft plastic casing, silicone button, and metal keychain. Also shows the receiver board with its learning button and antenna.

The transmitter includes an indicator light, a silicone button for operation, and a metal keychain for portability. It is powered by two CR2016 batteries, which are replaceable.

DieseRC DieseRC_ee5588fc59bd40fb9abc930e041c534e