Feu arrière de vélo intelligent MEILAN X3 Cute Eye

1. Produit terminéview

The MEILAN X3 Cute Eye Smart Bike Tail Light is an advanced rear lighting system designed to enhance cycling safety. It features integrated turn signals, automatic brake detection, a ground warning line, and wireless remote control via Bluetooth BLE 4.0. The light is USB Type-C rechargeable and boasts IPX6 waterproof rating.

Image : Terminéview of the MEILAN X3 Cute Eye Smart Bike Tail Light, highlighting its Bluetooth BLE 4.0 connectivity, IPX6 waterproof rating, 90 lumens brightness, 10 working hours, and compact size.

2. Contenu du colis

Avant de procéder à l'installation, veuillez vérifier que tous les composants énumérés ci-dessous sont présents dans votre colis :

Image: All components included in the MEILAN X3 Cute Eye Smart Bike Tail Light package, including the Cute Eye Tail Light, O-Ring Cable, Saddle Plastic Mount, Remote Control, Charging Cable, Tube Plastic Mount, Screws, and Rubber Bands.

• MEILAN X3 Cute Eye Tail Light
• Télécommande sans fil
• Câble de charge USB Type-C
• Saddle Plastic Mount
• Tube Plastic Mount
• O-Ring Cable
• Vis
• Élastiques

3. Configuration et installation

3.1 Recharge du feu arrière

Before first use, fully charge the MEILAN X3 tail light. The built-in 2500mAh rechargeable battery provides approximately 10 hours of operation in flashing mode when fully charged.

• Connect the supplied USB Type-C charging cable to the tail light's charging port.
• Connect the other end of the cable to a USB power source (DC 5V 0.5A).
• Allow approximately 3 hours for a full charge. The indicator light will change to confirm charging status.
• Important: Ensure the USB cover is tightly plugged before use, especially in wet conditions, to maintain IPX6 waterproof integrity.

Image: The MEILAN X3 Cute Eye Smart Bike Tail Light connected to a USB Type-C charging cable, illustrating its rechargeable battery and charging interface.

3.2 Montage du feu arrière

The MEILAN X3 can be mounted using either the saddle plastic mount or the tube plastic mount, depending on your bicycle's design.

• Saddle Mount: Attach the saddle plastic mount to the rails under your bicycle seat using the provided screws. Secure the tail light to this mount.
• Tube Mount: Use the tube plastic mount and rubber bands/O-ring cable to secure the tail light to the seat post or other suitable tube on your bicycle.

3.3 Installation de la télécommande

The wireless remote control is designed for easy access on your handlebar.

• Attach the remote control to a convenient location on your bicycle's handlebar using the provided mounting accessories.
• Ensure it is securely fastened and does not interfere with steering or braking.

3.4 Pairing the Remote Control and Tail Light

The remote control and tail light are wirelessly connected via Bluetooth BLE 4.0. After charging, they should pair automatically. If pairing issues occur, ensure both devices are charged and within close proximity.

4. Mode d'emploi

4.1 Basic Operation (Power On/Off and Light Modes)

The remote control allows for easy switching of the tail light's functions.

Image: The MEILAN X3 remote control mounted on a bicycle handlebar, showing the control button, left turn button, and right turn button. Instructions indicate long press for tail light off and short press for light effect switch.

• Marche/Arrêt : Long press the central 'Control Button' on the remote to turn the tail light on or off.
• Changer les modes d'éclairage : Short press the central 'Control Button' to cycle through the eight available lighting modes. The tail light provides 90 lumens of brightness.

4.2 Clignotants

Activate turn signals to indicate your intended direction to other road users.

• Press the 'Left Turn Button' on the remote to activate the left turn signal.
• Press the 'Right Turn Button' on the remote to activate the right turn signal.
• The turn signal will flash to clearly indicate your maneuver.

Image: A cyclist on a road, demonstrating the MEILAN X3 Cute Eye Smart Bike Tail Light's turn direction indicator function, with arrows showing the intended turn.

4.3 Automatic Brake Detection

The tail light is equipped with an automatic brake detection feature for enhanced safety.

• When the bicycle decelerates, the tail light will automatically illuminate brighter to signal braking to vehicles behind you.

4.4 Ground Warning Line

The MEILAN X3 projects a ground warning line for increased visibility.

• This feature projects two laser lines onto the ground behind your bicycle, creating a virtual safety zone.

Image: A cyclist demonstrating the MEILAN X3 Cute Eye Smart Bike Tail Light's automatic brake detection, where the light brightens, and the high light safety light, which projects ground warning lines.

4.5 AUTO Navigation with Meilan Finder M1 GPS Bike Computer

The MEILAN X3 can integrate with the Meilan Finder M1 GPS Bike Computer for navigation synchronization.

• When connected, the tail light can automatically turn right or left in conjunction with the navigation directions from the Finder GPS Bike Computer, eliminating the need for manual control.
• This feature requires the Meilan Finder Bike Computer to be paired with the Komoot APP for turn-by-turn navigation.

5. Entretien

5.1 Chargement

Regular charging is essential to maintain optimal performance. Refer to section 3.1 for charging instructions.

5.2 Remplacement de la pile de la télécommande

The remote control is powered by a replaceable CR2032 coin cell battery, which typically lasts for 12 months.

• To replace the battery, carefully open the remote control casing.
• Retirez la pile CR2032 usagée et insérez-en une nouvelle en respectant la polarité.
• Fermez le casing en toute sécurité.

5.3 Imperméabilisation

The MEILAN X3 has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. However, proper care is still necessary.

Image: The MEILAN X3 Cute Eye Smart Bike Tail Light shown with water droplets, emphasizing its IPX6 waterproof grade and advising to plug the USB cover tightly before use.

• Always ensure the USB charging port cover is tightly sealed before riding, especially in rainy or wet conditions.
• Ne plongez pas l'appareil dans l'eau.

5.4 Nettoyage

• Essuyez le feu arrière et la télécommande avec un chiffon doux et sec.amp chiffon pour enlever la saleté et les débris.
• Évitez d’utiliser des produits chimiques agressifs ou des nettoyants abrasifs.

6. Dépannage

6.1 Tail Light Not Turning On

• Ensure the tail light is fully charged.
• Vérifiez que la pile de la télécommande n'est pas déchargée.
• Confirm the remote control and tail light are paired. Try long-pressing the control button on the remote.

6.2 Télécommande ne répondant pas

• Vérifiez la pile CR2032 de la télécommande et remplacez-la si nécessaire.
• Assurez-vous que la télécommande se trouve à portée du feu arrière.
• Re-attempt pairing if connectivity issues persist.

6.3 Automatic Brake Light or Turn Signals Not Working

• Ensure the tail light is securely mounted and not obstructed.
• Verify the tail light is sufficiently charged.
• Si le problème persiste, contactez le support client.

7. Spécifications

8. Garantie et assistance

MEILAN offers the following support for the X3 Cute Eye Smart Bike Tail Light:

• Retours : We accept returns within 30 days without any specific reason.
• Garantie: Replacement of products or accessories is offered within one year from the date of purchase.
• Assistance clientèle : If you encounter any problems or have questions, please do not hesitate to contact our customer support team. We are committed to assisting you.