TIANSE BM-S2050A Spiral Coil Binding Machine Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your TIANSE BM-S2050A Spiral Coil Binding Machine. This machine is designed for creating professional-looking bound documents using spiral coils, featuring an electric coil inserter, disengaging pins, and adjustable margin controls. Please read this manual thoroughly before initial use and retain it for future reference.

2. Consignes de sécurité

• Always ensure the machine is placed on a stable, flat surface before operation.
• Keep hands and loose clothing away from moving parts, especially the punching mechanism and electric coil inserter.
• Do not attempt to punch more sheets than the specified maximum capacity (20 sheets of 80g paper) to prevent damage to the machine and ensure clean punches.
• Débranchez l'appareil de la prise électrique lorsqu'il n'est pas utilisé ou avant de le nettoyer ou de l'entretenir.
• Tenez la machine éloignée de l'eau ou de tout autre liquide.
• This machine is intended for paper and PVC covers only. Do not attempt to punch other materials.
• Tenir hors de portée des enfants.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• TIANSE BM-S2050A Spiral Coil Binding Machine
• Adaptateur secteur
• 100pcs 5/16'' Black PVC Coil Spines Starter Kit
• Coil Crimper Pliers
• Manuel d'instructions

4. Produit terminéview

Familiarize yourself with the components of your binding machine:

Figure 4.1: TIANSE BM-S2050A Spiral Coil Binding Machine Components

• Punch Handle: Used to manually punch holes in documents.
• Rubber Roller (Electric Coil Inserter): Electrically inserts plastic coils for faster binding.
• Rubber Roller Rotary Switch: Activates the electric coil inserter.
• Entrée de papier : Emplacement d'insertion des documents pour la perforation.
• Paper Sizing Guide: Adjustable guide for aligning different paper sizes (A4, A5, Letter).
• 3 Gears Paper Margin Adjustment: Knob to customize the paper margin (2.5mm, 4.5mm, 6.5mm).
• Adjustable 46 Disengaging Pins: Allows control over which holes are punched, preventing half-punched holes.
• Drawer Type Scrap Box: Collects paper scraps from punching.

5. Installation

1. Déballage: Retirez soigneusement tous les composants de l'emballage.
2. Placement: Place the binding machine on a stable, flat surface.
3. Connexion électrique : Plug the power adapter into the machine and then into a suitable electrical outlet. The electric coil inserter requires power.
4. Initial Cleaning (Lubrication Removal): Before first use, punch several sheets of oil-absorbing paper (or scrap paper) at least 6 times to remove any residual lubricant from the punching blades. This ensures clean punches for your documents.
5. Assemblage de la poignée : If the punch handle is not pre-assembled, insert it into the designated slot and secure it according to the instructions in the video below.

6. Mode d'emploi

6.1. Adjusting Paper Settings

1. Set Paper Sizing Guide: Adjust the paper sizing guide to match your document size (Letter, A4, A5). This ensures symmetrical paper output.


Figure 6.1: Paper Sizing Guide Adjustment

2. Adjust Margin: Use the 3 Gears Paper Margin Adjustment knob to set the desired margin depth (2.5mm, 4.5mm, or 6.5mm).


Figure 6.2: Punch Margin Adjustment

3. Use Disengaging Pins: For non-standard paper sizes or to avoid half-punched holes, pull out the disengaging pins corresponding to the areas where holes are not desired.

Figure 6.3: Disengaging Pins

6.2. Perforation des documents

1. Insert up to 20 sheets of 80g paper (or 2 PVC covers) into the paper inlet, aligning them against the paper sizing guide.
2. Firmly pull down the punch handle to punch the holes. Release the handle to return it to its original position.


Figure 6.4: Punching Operation

3. Repeat the punching process for all pages and covers.

6.3. Binding Documents with Electric Coil Inserter

1. Gather your punched pages and covers.
2. Take a spiral coil (up to 2" diameter can be inserted by hand, up to ¾" using the electric inserter).
3. Start threading the coil through the first few holes of your document manually.
4. Press the Rubber Roller Rotary Switch to activate the electric coil inserter.


Figure 6.5: Electric Coil Inserter

5. Gently guide the partially inserted coil against the rotating rubber roller. The roller will automatically feed the coil through the remaining holes.
6. Once the coil is fully inserted, release the Rubber Roller Rotary Switch.
7. Use the provided coil crimper pliers to cut and crimp both ends of the coil. This prevents the coil from unraveling.


Figure 6.6: Crimping Coil Ends

7. Entretien

• Poubelle : Regularly empty the Drawer Type Scrap Box to prevent accumulation of paper scraps, which can affect machine performance.
• Nettoyage: Essuyez l'extérieur de la machine avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
• Lubrification: The machine is pre-lubricated. If you notice increased resistance during punching over time, consult TIANSE customer support for guidance on appropriate lubrication.

8. Dépannage

• Half-punched holes: Ensure the disengaging pins are correctly set for your paper size. Adjust the paper sizing guide to ensure proper alignment.
• Difficulty punching: Do not exceed the maximum punching capacity. Reduce the number of sheets per punch. Ensure the punch handle is pulled down firmly and completely.
• Coil not inserting smoothly: Ensure the electric coil inserter is turned on. Check that the coil is correctly aligned with the punched holes and the rubber roller.
• La machine ne s'allume pas : Check the power adapter connection and the electrical outlet.

9. Spécifications

10. Garantie et assistance

Your TIANSE BM-S2050A Spiral Coil Binding Machine comes with a Lifetime Manufacturer Warranty. For warranty claims, technical support, or any inquiries, please contact TIANSE customer service through your purchase platform or the official TIANSE website.