1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Bosch Professional GO Cordless Screwdriver. Please read these instructions carefully before using the tool and keep them for future reference.
The Bosch GO Cordless Screwdriver is designed for screwdriving applications in various materials such as wood, metal, and plastic. Its compact design and intuitive operation make it suitable for both professional and amateur use.
2. Consignes de sécurité
Always observe general power tool safety warnings and instructions. Failure to follow all instructions may result in electric shock, fire, and/or serious injury.
2.1 Consignes de sécurité générales pour les outils électriques
- Sécurité de la zone de travail : Maintenez votre espace de travail propre et bien éclairé. Les zones encombrées ou sombres favorisent les accidents. N'utilisez pas d'outils électriques dans des atmosphères explosives, par exemple en présence de liquides, de gaz ou de poussières inflammables.
- Sécurité électrique : Les fiches des outils électriques doivent être compatibles avec les prises de courant. Ne modifiez jamais la fiche. N'endommagez pas le cordon d'alimentation. Tenez-le éloigné de la chaleur, de l'huile, des arêtes vives et des pièces mobiles.
- Sécurité personnelle : Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when appropriate.
- Utilisation et entretien des outils électriques : Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or remove the battery pack before making any adjustments, changing accessories, or storing power tools. Store idle power tools out of the reach of children.
- Utilisation et entretien de l'outil à batterie : Rechargez uniquement avec le chargeur spécifié par le fabricant. Utilisez les outils électriques uniquement avec les batteries spécifiquement conçues à cet effet.
2.2 Specific Screwdriver Safety
- Tenez l'outil électrique par les surfaces de préhension isolées lorsque vous effectuez une opération au cours de laquelle l'élément de fixation peut entrer en contact avec des câbles cachés.
- Always ensure the bit is securely inserted before operation.
- Do not touch the bit immediately after use as it may be hot.
3. Contenu du colis
The Bosch Professional GO Cordless Screwdriver set includes the following items:
- Bosch GO Cordless Screwdriver
- Jeu d'embouts 25 pièces
- Câble de chargement USB
- L-BOXX Mini with transparent cover
Image 3.1: The complete Bosch GO Cordless Screwdriver kit, including the screwdriver, 25-piece bit set, USB charging cable, and L-BOXX Mini storage case.
4. Produit terminéview
The Bosch GO Cordless Screwdriver is designed for ease of use and efficiency. Below are key components and features:
Image 4.1 : Un gros plan view of the Bosch GO Cordless Screwdriver, highlighting its ergonomic design, power button, and torque adjustment collar.
4.1 Principales caractéristiques
- Dual Start Options: Activate by pressing the tool against the material (Push&Go function) or by pressing the start button.
- Frein électronique : The screwdriver stops immediately after deactivation, reducing bit and screw wear.
- Mechanical Clutch: Offers five torque settings for precise control, plus a 'maximum power' mode.
- Haute performance : Achieves up to 360 rotations per minute for fast and smooth operation.
- Chargement USB : Compatible with all common USB chargers for convenient power replenishment.
Image 4.2: The Bosch GO Cordless Screwdriver shown with its approximate dimensions: 190 mm in length and 40 mm in width/height.
5. Installation
5.1 Chargement de la batterie
The Bosch GO Cordless Screwdriver is powered by an integrated Lithium-Ion battery. Before first use, fully charge the battery.
- Connect the supplied USB charging cable to the screwdriver's charging port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., a USB wall adapter, computer USB port, or power bank).
- The charging indicator light will illuminate to show charging status. Refer to the tool's specific indicator behavior for full charge notification.
- Une fois complètement chargée, débranchez le câble de charge.
The battery requires approximately 1.5 hours for a full charge.
5.2 Installation des embouts de tournevis
Le tournevis utilise des embouts hexagonaux standard de 1/4 de pouce.
- Ensure the screwdriver is switched off.
- Push the desired screwdriver bit firmly into the bit holder until it clicks into place.
- To remove a bit, pull it straight out of the bit holder.
6. Mode d'emploi
6.1 Sélection de la mise sous/hors tension et du sens de rotation
The Bosch GO features a slide switch for selecting the rotation direction and locking the tool.
- Forward Rotation (Screwing In): Slide the switch to the 'R' (Right) position.
- Reverse Rotation (Screwing Out): Slide the switch to the 'L' (Left) position.
- Position de verrouillage : Slide the switch to the center position to lock the tool and prevent accidental activation.
6.2 Starting the Screwdriver
The Bosch GO offers two methods to start operation:
- Push&Go Function: With the direction switch set to 'R' or 'L', simply press the screwdriver firmly against the screw head or workpiece. The motor will start automatically.
- Manual Start Button: Alternatively, with the direction switch set to 'R' or 'L', press the red power button on the side of the tool to start the motor.
6.3 Réglage du couple
The mechanical clutch allows you to select the appropriate torque for your application, preventing overtightening or damage to the screw/material.
- Locate the torque adjustment collar near the front of the screwdriver.
- Rotate the collar to select one of the five available torque settings. Lower numbers indicate lower torque, suitable for smaller screws or softer materials. Higher numbers provide more torque for larger screws or harder materials.
- For maximum power, rotate the collar to the 'MAX' setting. This bypasses the clutch for full torque delivery.
Image 6.1: A technician utilizing the Bosch GO Cordless Screwdriver to work on components within an electrical panel, demonstrating its precision for intricate tasks.
Image 6.2: An individual using the Bosch GO Cordless Screwdriver for delicate repair work on a laptop, showcasing its suitability for electronics and small fasteners.
Image 6.3: A person using the Bosch GO Cordless Screwdriver to perform maintenance on a washing machine, illustrating its versatility for household appliance repairs.
7. Entretien
Regular maintenance ensures the longevity and optimal performance of your Bosch GO Cordless Screwdriver.
- Nettoyage: Keep the tool and its ventilation openings clean to ensure safe and efficient operation. Use a soft, damp Nettoyer l'extérieur avec un chiffon. Ne pas utiliser de produits chimiques agressifs ni de nettoyants abrasifs.
- Porte-embout : Periodically inspect the bit holder for wear or damage. Ensure it is free of debris that could prevent proper bit insertion.
- Entretien de la batterie: Store the tool and battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not store the battery in a completely discharged state for extended periods.
- Stockage: When not in use, store the screwdriver and its accessories in the L-BOXX Mini to protect them from dust and damage.
8. Dépannage
If you encounter issues with your Bosch GO Cordless Screwdriver, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Screwdriver does not start. | Battery is discharged. Direction switch is in the lock position. | Charge the battery. Move the direction switch to 'R' or 'L'. |
| Le tournevis s'arrête inopinément. | Batterie faible. Protection contre les surcharges activée. | Recharge the battery. Reduce pressure or use a lower torque setting. |
| Screw is not driven in fully or bit slips. | Incorrect torque setting. Worn or incorrect bit. | Increase the torque setting or switch to 'MAX' mode. Replace the bit or use the correct type for the screw. |
| Le voyant de charge ne fonctionne pas. | Câble ou source d'alimentation défectueux. | Essayez un autre câble USB ou un autre adaptateur secteur. |
If the problem persists after attempting these solutions, please contact Bosch Professional customer service.
9. Spécifications
Detailed technical specifications for the Bosch Professional GO Cordless Screwdriver (Model: 06019H2102):
| Spécification | Valeur |
|---|---|
| Marque | Bosch |
| Numéro de modèle | 06019H2102 |
| Source d'énergie | Alimenté par batterie |
| Type de batterie | Lithium-ion |
| Voltage | 3.6 volts |
| Capacité de la batterie | 1.5 Ah |
| Vitesse de rotation maximale | 360 tr/min |
| Nombre de réglages de couple | 5 + Maximum Power Mode |
| Poids de l'article | 0.31 kilogrammes (10.7 onces) |
| Dimensions du produit (L x l x H) | 7.48" x 1.57" x 3.54" (190 mm x 40 mm x 90 mm) |
| Matériel | Métal |
| Couleur | Noir |
| Date de première disponibilité | 30 septembre 2020 |
10. Garantie et assistance
Bosch Professional products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Bosch Professional website.
For technical support, service, or spare parts, please contact your local Bosch Professional service center. Contact details can typically be found on the Bosch Professional websur le site ou dans la documentation fournie avec votre outil.
Ressources en ligne : Pour plus d'informations, l'enregistrement du produit et la FAQ, veuillez consulter le site web. www.bosch-professionnel.com.