Manuel d'instructions du support mural inclinable pour téléviseur BONTEC

1. Introduction et plusview

This manual provides detailed instructions for the installation, operation, and maintenance of your BONTEC Tilting TV Wall Mount. This mount is designed for most 26-65 inch LCD, LED, OLED, 4K Flat, and Curved Screen TVs, supporting VESA patterns up to 400x400mm and a maximum weight capacity of 121 lbs (55 kg).

The BONTEC TV wall mount offers a low-profile, slim design that projects just 30mm from the wall, providing a clean and modern appearance. It features a 10-degree downward tilt for optimal viewing angles and reduced glare, enhancing your viewing experience and minimizing neck or eye strain. Constructed from premium cold-rolled steel with a durable black powder-coated finish, it ensures strong and secure support for your television.

2. Consignes de sécurité

AVERTISSEMENT : Le non-respect de ces instructions peut entraîner des blessures graves, des dommages matériels ou l'annulation de votre garantie.

• Always ensure the wall structure can safely support the combined weight of the mount and the television.
• Ne pas dépasser la capacité de poids maximale de 121 lb (55 kg).
• Verify your TV's VESA pattern and weight are compatible with this mount before beginning installation.
• Utilisez l'équipement de sécurité approprié, notamment une protection oculaire, lors de l'installation.
• If drilling into wood studs, ensure the drill bit size is correct to prevent splitting.
• If drilling into concrete or brick, use the provided concrete anchors and ensure the drill bit is suitable for masonry.
• Never attempt to install the mount or lift the TV alone if it is too heavy. Seek assistance.
• Conserver toutes les petites pièces et les matériaux d'emballage hors de portée des enfants.

3. Contenu du colis

Please check the package contents against the list below to ensure all parts are present and undamaged.

• TV Wall Mount (Wall Plate and TV Brackets)
• Kit de fixation (vis, rondelles et entretoises diverses pour téléviseur et mur)
• Niveau à bulle
• Cable Management Ties (5x)
• Manuel d'instructions (ce document)

4. Spécifications

5. Configuration et installation

The BONTEC TV wall mount is designed for quick and easy installation. Please follow these steps carefully.

5.1. Vérifications avant l'installation

1. Vérifiez la compatibilité avec votre téléviseur : Ensure your TV's VESA pattern and weight are within the mount's specifications (refer to Section 4).
2. Identifiez le type de mur : Determine if you are mounting to wood studs or a concrete/brick wall. Different hardware is provided for each.
3. Localiser la position de montage : Choisissez un emplacement approprié sur votre mur, en tenant compte de viewing height and stud/wall integrity.

5.2. Fixation des supports de télévision au téléviseur

Attach the two vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the mounting hooks on the brackets are facing inward, towards the center of the TV, as shown in the correct installation method diagram below.

5.3. Montage de la plaque murale

1. Marquer les trous de perçage : Hold the wall plate against the wall at your desired height. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill hole locations through the plate's mounting holes.
2. Trous de forage : Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete/brick, use a masonry drill bit and insert the plastic anchors flush with the wall surface.
3. Plaque murale sécurisée : Attach the wall plate to the wall using the lag bolts (for wood studs) or concrete anchors and screws (for concrete/brick). Tighten all screws securely.

5.4. Accrocher le téléviseur

Carefully lift the television with the attached brackets and hook them onto the wall plate. The simple 3-step installation design allows the TV to be fixed automatically. Pull the buckle to release the TV in seconds if required.

5.5. Gestion des câbles

Utilize the provided cable management ties to neatly organize and secure your TV cables, preventing tangles and maintaining a clean aesthetic. The mount's design provides enough space for cables behind the TV.

5.6. Vidéo d'installation

For a visual guide, please refer to the official BONTEC installation video:

6. Mode d'emploi

The BONTEC Tilting TV Wall Mount allows for easy adjustment of your TV's viewangle de vue.

6.1. Tilting Your TV

This mount features a 10-degree downward tilt capability. To adjust the tilt, gently push the bottom of your TV forward or backward until you achieve the desired angle. This feature helps reduce glare from lights or windows and provides a more comfortable viewexpérience de travail.

7. Entretien

To ensure the longevity and safe operation of your BONTEC TV wall mount, follow these simple maintenance guidelines:

• Contrôles réguliers : Periodically (e.g., every 6-12 months) inspect all mounting screws and connections to ensure they remain tight and secure.
• Nettoyage: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• Élimination de la poussière : Gently dust the mount and surrounding areas to prevent dust buildup.

8. Dépannage

If you encounter any issues with your BONTEC TV wall mount, please refer to the following common problems and solutions:

9. Garantie et assistance

BONTEC products are manufactured with quality and reliability in mind. For specific warranty information regarding your BONTEC Tilting TV Wall Mount (Model B08J2G8SWG), please refer to the warranty card included with your purchase or visit the official BONTEC website. For technical support, replacement parts, or any other inquiries, please contact BONTEC customer service through their official channels.

You can visit the BONTEC Store on Amazon for more information: Magasin BONTEC