1. Introduction et plusview
The Wellue Bluetooth Pulse Oximeter Fingertip is designed to accurately measure your SpO2 (Blood Oxygen Saturation) and Pulse Rate. This device automatically powers on and off for ease of use. It is intended for sports and aviation use only and is not a medical device. It should not be used for any medical purpose or to diagnose any medical condition.

Image: Wellue Bluetooth Pulse Oximeter and accompanying smartphone app displaying readings.
2. Contenu de la boîte
Your Wellue Bluetooth Pulse Oximeter package includes:
- Wellue Bluetooth Pulse Oximeter Fingertip (Model: PC-60FW)
- 2 piles AAA (fournies pour une utilisation immédiate)
- Carry Pouch (to protect the device)
- Lanyard (for convenient portability)
- User Manual (PDF) - Télécharger le PDF

Image: Diagram showing labeled parts of the Wellue Pulse Oximeter.
3. Configuration : Installation de la batterie
Before first use, install the included AAA batteries:
- Repérez le couvercle de la batterie à l'arrière de l'oxymètre.
- Faites glisser le couvercle de la batterie pour l'ouvrir.
- Insert the 2 x AAA batteries, ensuring correct polarity (+ and - ends match the diagram inside the compartment).
- Faites glisser le couvercle de la batterie en place jusqu'à ce qu'il s'enclenche correctement.

Image: Hands installing AAA batteries into the Wellue Pulse Oximeter's battery compartment.
Guide vidéo de configuration
Video: Official guide on how to use the Wellue 60FW pulse oximeter, including battery installation and initial measurement steps.
4. Mode d'emploi
Pour prendre une mesure :
- Ouvrez le clip de l'oxymètre.
- Insert one finger (preferably the index finger) into the rubber cushion of the clip, ensuring the finger is in the correct position.
- Release the clip. The monitor will automatically turn on and begin measuring.
- Keep your hand still during the measurement process.
- After approximately 8 seconds, your SpO2 and Pulse Rate readings will be displayed on the OLED screen.
- Remove your finger from the device to automatically power it off.

Image: A finger inserted into the Wellue Pulse Oximeter, with a smartphone displaying the connected app and real-time readings.
Afficher les informations
The OLED screen displays the following key metrics:
- %SpO2: Blood Oxygen Saturation level.
- PR: Fréquence cardiaque (battements par minute).
- PI: Perfusion Index (indicates the strength of the pulse signal).
- Pulse Bar Graph: Visual representation of pulse strength.
- Pulse Rate Wave: Real-time waveform of your pulse.

Image: Wellue Pulse Oximeter displaying readings alongside a smartphone showing the corresponding app interface.
5. Smart Features: App Usage and Data Storage
The Wellue Pulse Oximeter can connect to a free mobile application for Android and iOS devices, allowing for real-time data reception and storage. Data is synchronized and stored only when the app is open and running.
- Données en temps réel : View your SpO2 and Pulse Rate readings instantly on your smartphone.
- Stockage des données : The app stores historical data, allowing you to review trends and detailed reports at any time.
- Mémoire intégrée: The device itself can store up to 12 groups of SpO2 and Pulse Rate data on its display screen for quick review of recent measurements.

Image: Wellue Pulse Oximeter screen showing built-in memory display with past SpO2 and Pulse Rate readings.

Image: Smartphone app interface displaying historical oxygen level and pulse rate trends over time.
Smart Reminders
The oximeter features a smart reminder function. If your O2 level or pulse rate exceeds a preset limit, the device will emit a beep to alert you, and the readings will flash on the screen. These limits can be adjusted through the device's settings menu.

Image: Wellue Pulse Oximeter screen displaying alarm settings for SpO2 and Pulse Rate limits.

Image: Wellue Pulse Oximeter displaying readings with an audible reminder icon.
6. Maintenance et entretien
To ensure the longevity and accuracy of your Wellue Pulse Oximeter, follow these maintenance guidelines:
- Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs et n'immergez pas l'appareil dans l'eau.
- Remplacement de la batterie : Replace batteries when the low battery indicator appears on the screen. Remove batteries if the device will not be used for an extended period.
- Durée d'utilisation : It is recommended that the oximeter not be applied to the same location for longer than 2 hours. If any abnormal condition is found, change the position of the oximeter.
- Stockage: Store the device in the provided carry pouch in a cool, dry place away from direct sunlight and extreme temperatures.
7. Dépannage
Si vous rencontrez des problèmes avec votre appareil, reportez-vous aux problèmes courants et aux solutions suivants :
| Problème | Cause possible | Solution |
|---|---|---|
| L'écran ne s'allume pas / L'appareil ne s'allume pas | Piles faibles ou déchargées ; installation incorrecte des piles. | Remplacez les piles ; assurez-vous de respecter la polarité. |
| Lectures inexactes ou instables | Improper finger placement; Movement during measurement; Cold fingers; Nail polish or artificial nails. | Ensure finger is fully inserted and still; Warm hands if cold; Remove nail polish if necessary. |
| Problèmes de connexion Bluetooth | Bluetooth not enabled on phone; App not open; Device out of range. | Enable Bluetooth; Open the app; Keep device and phone close. |
8. Spécifications
- Dimensions du produit : 3.74 x 2.95 x 1.57 pouces; 2.89 onces
- Numéro de modèle de l'article : PC-60FW
- Piles : 2 piles AAA requises (incluses)
- Date de mise en ligne sur Amazon : 16er mars 2020
- Fabricant: Creative Medical
- Plage de mesure : SpO2: 70-100%, Pulse Rate: 30-250 bpm
- Couleur: Noir
- Pays d'origine : Chine
9. Garantie et assistance
Your Wellue Pulse Oximeter is eligible for reimbursement with a Flexible Spending Account (FSA) or Health Savings Account (HSA).
For detailed warranty information, please refer to the User Manual provided with your product or visit the official Wellue website.
If you require further assistance or have questions not covered in this manual, please contact Wellue customer support:
- E-mail: service@getwellue.com
- Website: getwellue.com