LEKATO M01696UK

LEKATO 9V AC/DC Pedal Power Supply Adapter User Manual

Model: M01696UK

Introduction

Thank you for choosing the LEKATO 9V AC/DC Pedal Power Supply Adapter. This adapter is designed to provide stable and reliable power to most instrument pedals and other 9-volt battery devices, ensuring consistent, battery-free performance. This manual provides essential information for the proper setup, operation, and maintenance of your power supply.

LEKATO 9V AC/DC Pedal Power Supply Adapter, a compact black power brick with a DC barrel connector cable.

Image: The LEKATO 9V AC/DC Pedal Power Supply Adapter.

Caractéristiques principales

  • Stable Power Conversion: Converts AC wall power to 9-Volt DC, suitable for a wide range of guitar effect pedals and 9-volt devices.
  • Fabrication de qualité : Produced in a state-of-the-art facility, adhering to stringent quality controls for durability and performance.
  • Performances constantes : Ensures reliable, battery-free operation for your devices.
  • Large compatibilité : Designed for broad compatibility with various effect pedals. Refer to your device's specifications for exact power requirements.
  • Professional Noise Isolation: Engineered to minimize unwanted noise, providing a clean power source for your audio equipment.
  • Protections de sécurité : Includes over-charge, short circuit, temperature, over-voltage, over-current, and overload protection for enhanced safety.
LEKATO Pedal Power Supply with icons for various protections like over-charge, short circuit, temperature, over-voltage, protection contre les surintensités et les surcharges.

Image: LEKATO Pedal Power Supply highlighting its multiple safety features.

Instructions d'installation

  1. Déballez l'adaptateur : Carefully remove the LEKATO 9V AC/DC Pedal Power Supply Adapter from its packaging.
  2. Vérifiez la compatibilité de l'appareil : Before connecting, ensure your device requires a 9V DC power input with a center-negative polarity. The adapter features a 5.5mm*2.1mm barrel connector.
  3. Connectez-vous à l'appareil : Insert the barrel connector of the power supply into the DC input jack of your effect pedal or 9-volt device.
  4. Branchez sur une prise de courant : Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC, 50/60Hz).
  5. Mise sous tension : Once connected, your device should receive power. Observe any indicator lights on your pedal to confirm it is powered on.
Close-up of the power adapter's barrel connector with a diagram showing central negative polarity.

Image: Ensure your device requires central negative polarity (5.5mm*2.1mm barrel connector).

Image showing the extended 5.0 feet cord of the power adapter.

Image: The adapter features an extended 5.0 feet cord for flexible placement.

Mode d'emploi

The LEKATO 9V AC/DC Pedal Power Supply Adapter is designed for simple plug-and-play operation. Once connected as per the setup instructions, your compatible device will receive continuous power.

  • Puissance de sortie : The adapter provides a stable 9V DC output with 1000mA (1A) current, suitable for devices requiring up to 1A.
  • Vol d'entréetage: Compatible with universal input voltage from 100-240V AC, 50/60Hz, making it suitable for international use with appropriate plug adapters (not included).
  • Réduction du bruit : The adapter incorporates professional noise isolation to ensure a clean audio signal from your pedals.
Image showing the power adapter with its output specifications: 9V DC 1000mA and input: 100-240V ~ 50/60Hz, 400mA.

Image: Power Watt Compatibility details for the adapter.

Various guitar pedals from different brands connected in a circle, illustrating wide compatibility.

Image: Wide compatibility with various effect pedals.

Video Demonstration: LEKATO Guitar Looper Pedal Set

Video: This video demonstrates the LEKATO Guitar Looper Pedal Set, which can be powered by this 9V AC/DC adapter. It showcases the pedal's functionality and how it integrates into a guitar setup.

Entretien

  • Nettoyage: Débranchez l'adaptateur de la prise secteur et de votre appareil avant de nettoyer. Essuyez la surface avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni d'aérosols.
  • Stockage: Store the adapter in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
  • Entretien des câbles : Ne pliez pas et ne pincez pas excessivement le cordon d'alimentation. Évitez de placer des objets lourds sur le cordon.
  • Inspection: Inspectez régulièrement l'adaptateur et le câble afin de détecter tout signe de dommage, comme des fils effilochés ou un câble fissuré.asing. If damage is found, discontinue use and replace the adapter.

Dépannage

ProblèmeCause possibleSolution
L'appareil ne s'allume pas.
  • Adaptateur mal branché.
  • Device incompatible with 9V DC or center-negative polarity.
  • Prise de courant défectueuse.
  • Adaptateur ou câble endommagé.
  • Ensure adapter is securely plugged into both the device and the wall outlet.
  • Verify your device's power requirements (voltage, current, polarity) match the adapter's specifications.
  • Test the power outlet with another working appliance.
  • Inspect the adapter and cable for damage. Replace if necessary.
Bruit ou bourdonnement excessif.
  • Interférence de boucle de masse.
  • Interférences provenant d'autres appareils électroniques.
  • Câbles ou connexions défectueux.
  • Ensure all audio cables are properly shielded and connected.
  • Try plugging the adapter into a different outlet or power strip.
  • Move the adapter away from other electronic devices that may cause interference.
  • Testez avec différents câbles audio.
L'adaptateur est chaud.
  • Fonctionnement normal (légère chaleur).
  • Surcharge ou court-circuit.
  • Mauvaise aération.
  • Une légère chaleur est normale.
  • If excessively hot, disconnect immediately. Check for short circuits in your pedal chain or if the device draws more current than the adapter provides (1000mA).
  • Veillez à ce que l'adaptateur soit placé dans un endroit bien ventilé.

Caractéristiques

  • Marque: Lékato
  • Nom du modèle : M01696UK
  • Saisir: 100-240V AC, 50/60Hz, 400mA
  • Sortir: 9V DC, 1000mA (1A)
  • Polarité: Centre négatif
  • Type de connecteur : DC Barrel Connector (5.5mm x 2.1mm)
  • Longueur du câble : Environ 5.0 pieds
  • Caractéristiques spéciales : Short Circuit Protection, Over-charge Protection, Temperature Protection, Over-voltage Protection, Over-current Protection, Overload Protection
  • Appareils compatibles : Effect Pedals, 9-Volt Battery Devices
  • Matériel: Plastique ou métal
  • Poids de l'article : 2.89 onces
  • Dimensions du colis : 4.02 x 3.07 x 2.6 pouces
  • Code à barres : 793811852394
  • ASIN: B07VXGHRSS

Informations sur la garantie

This product is covered by a standard return policy. For specific warranty details and duration, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

  • Return Policy Duration: 30 jours (remboursement/remplacement)

Assistance clientèle

For any questions, technical assistance, or support regarding your LEKATO Pedal Power Supply Adapter, please contact the seller or LEKATO customer service. You can often find contact information on the product packaging or the seller's storefront.

Vendeur: WSZCH

Visit the LEKATO Store: Boutique LEKATO sur Amazon

© 2026 LEKATO. Tous droits réservés.