RHA Wireless Flight Adapter

RHA Wireless Flight Adapter Instruction Manual

Model: Wireless Flight Adapter

Introduction

The RHA Wireless Flight Adapter is a Bluetooth audio transmitter designed to convert any audio signal from a 3.5mm device or a dual 3.5mm flight audio socket into a high-fidelity Bluetooth signal. This allows you to use your preferred Bluetooth headphones with in-flight entertainment systems, portable gaming consoles, or other devices that typically require a wired connection.

RHA Wireless Flight Adapter, a compact black device with the RHA logo, shown from a top-down angle.

Image: The RHA Wireless Flight Adapter, a compact black device, ready for use.

Qu'y a-t-il dans la boîte

  • RHA Wireless Flight Adapter
  • Câble de chargement USB-C

Configuration et mise en route

1. Chargement de l'adaptateur

Before first use, fully charge the Wireless Flight Adapter using the provided USB-C cable. Connect the USB-C end to the adapter and the other end to a compatible USB power source. A full charge provides approximately 16 hours of battery life.

Côté view of the RHA Wireless Flight Adapter showing the USB-C charging port.

Image: The side of the adapter with the USB-C charging port.

2. Connexion à une source audio

The adapter features modular 3.5mm audio jacks. Depending on your audio source, you can use a single 3.5mm pin or both pins for dual 3.5mm flight audio sockets.

  • Single 3.5mm Input: For standard audio jacks (e.g., portable music players, laptops), fold one of the pins away and insert the remaining pin into the audio output.
  • Dual 3.5mm Flight Audio Input: For in-flight entertainment systems with two audio ports, extend both pins and insert them into the respective sockets.
Bas view of the RHA Wireless Flight Adapter showing its two foldable 3.5mm audio jacks, one extended and one folded.

Image: The adapter with its modular 3.5mm audio jacks, illustrating single and dual pin configurations.

3. Appairage avec des écouteurs Bluetooth

  1. Assurez-vous que vos écouteurs Bluetooth sont en mode appairage. Consultez le manuel de vos écouteurs pour obtenir des instructions spécifiques.
  2. Turn on the RHA Wireless Flight Adapter. The LED indicator will flash to show it's searching for devices.
  3. The adapter will automatically connect to nearby Bluetooth headphones in pairing mode. Once connected, the LED indicator will change to a solid light.

The adapter supports Bluetooth 5.0 and high-fidelity aptX and aptX Low Latency codecs for optimal audio quality and minimal delay.

Video: An official RHA video demonstrating the compatibility and usage of the Wireless Flight Adapter with various audio sources and Bluetooth headphones.

Mode d'emploi

Simultaneous Broadcast to Two Headphones

The RHA Wireless Flight Adapter can broadcast audio to two Bluetooth headphones simultaneously. To enable this feature, ensure both pairs of headphones are in pairing mode before turning on the adapter. The adapter will attempt to connect to both devices. This allows two users to enjoy the same audio source wirelessly.

RHA Wireless Flight Adapter plugged into an in-flight entertainment screen, with a person wearing wireless headphones.

Image: The adapter in use with an in-flight entertainment system, providing wireless audio.

Caractéristiques

Marque RHA
Nom du modèle Wireless Flight Adapter
Technologie de connectivité Bluetooth
Norme Bluetooth Bluetooth 5.0
Codecs pris en charge aptX, aptX faible latence
Entrée audio 3.5mm AUX, 3.5mm flight audio (modular)
Autonomie de la batterie Jusqu'à 16 XNUMX heures
Port de chargement USB Type C
Matériel Plastique
Couleur Noir
Poids de l'article 23 gramme

Informations et avertissements de sécurité

  • Avoid using this device near other wireless devices to prevent potential interference.
  • Do not dispose of the battery in regular household trash. Follow local regulations for proper battery disposal and recycling.
  • Gardez l’appareil à l’abri de l’eau et des températures extrêmes.
  • N’essayez pas de démonter ou de réparer l’appareil vous-même. Cela pourrait annuler la garantie et l’endommager.

Dépannage

If you encounter issues with your RHA Wireless Flight Adapter, please try the following steps:

  • Pas d'alimentation : Ensure the adapter is fully charged. Connect it to a USB power source using the USB-C cable.
  • Impossible d'appairer :
    1. Assurez-vous que vos écouteurs Bluetooth sont en mode de couplage.
    2. Turn the adapter off and then on again to reset its Bluetooth search.
    3. Move the adapter closer to your headphones.
    4. Assurez-vous qu'aucun autre appareil Bluetooth n'interfère avec le processus d'appairage.
  • Pas d'audio :
    1. Verify the adapter is correctly plugged into the audio source (single or dual 3.5mm pins).
    2. Check that the audio source is playing and its volume is turned up.
    3. Ensure the adapter is successfully paired with your headphones and the headphone volume is adjusted.
  • Mauvaise qualité audio/Interférences :
    1. Move the adapter closer to your headphones.
    2. Réduisez les interférences provenant d'autres appareils sans fil.

Garantie et assistance

The RHA Wireless Flight Adapter comes with a Garantie constructeur d'un an, valid on purchases from RHA or Amazon directly. For warranty claims, technical support, or further assistance, please visit the official RHA website ou contactez leur service client.

Pour plus d'informations, visitez : RHA Official Store

© 2024 RHA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.