Introduction
The Cybex Priam 3 Complete Stroller offers a versatile 3-in-1 travel system. Its single frame supports three modes of use: as a travel system with a carry cot or a Cybex infant car seat, and as a luxurious parent-facing or forward-facing stroller. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your Priam 3 Stroller.
Image: Cybex Priam 3 Complete Stroller in Indigo Blue with Chrome/Black Frame.
Configuration et assemblage
Follow these steps to assemble your Cybex Priam 3 Stroller. Refer to the video tutorial for visual guidance.
1. Déballage et configuration initiale
Carefully remove all components from the packaging. Ensure all parts are present before beginning assembly. The main box contains the chassis, seat frame, wheels, and car seat adapters. The seat pack box contains the canopy and seat textiles.
Video: Cybex Priam Tutorial Video - Unboxing and initial chassis setup.
2. Chassis Assembly
To unfold the chassis, lift the handle until it clicks into place. Separate the rear frame from the front frame until it locks. Attach the rear wheels by slotting the axle into the hole until it clicks. Attach the front wheels by inserting them until they click.
Image: Cybex Priam 3 Stroller chassis with wheels attached.
3. Seat Frame and Textile Installation
Pull up the lever on the seat frame to adjust the backrest position. Pop the footrest downwards. Attach the main seat textiles by sliding the sleeve over the seat back of the frame. Feed the textiles down and secure them over the rubber bit. Pull down the gap in the textiles over the handle for regulating the height of the seat. Secure the central buckle by slotting it into the padded area and feeding the strap through the slit behind the footrest. Tuck in any excess strap.
Video: Cybex Priam Tutorial Video - Seat frame and textile installation.
4. Installation de l'auvent
Attach the canopy adapters to the designated slots on the seat frame. Ensure the rivet on the adapter fits correctly into the slit on the bar. Zip the canopy all the way to the seat back. Secure the button at the bottom of the canopy to the corresponding button on the seat fabrics.
5. Attaching the Seat Pack to the Chassis
Align the seat frame with the chassis and lock it into place. The seat can be attached in either forward-facing or parent-facing positions.
Image: Cybex Priam 3 Stroller with dimensions: 36"L x 24"W x 42"H.
Mode d'emploi
1. Guidon réglable
The handlebar can be adjusted to multiple height settings by pressing the buttons on the sides. This allows for comfortable pushing for users of various heights.
2. Repose-pieds réglable
The footrest can be adjusted by pressing the buttons on the sides and moving it to the desired position. This ensures comfort for your child as they grow.
3. Canopy Features
The XXL sun canopy provides extensive sun protection. It features a peek-a-boo window with a magnetic closure, allowing you to check on your child and providing ventilation. The canopy can be extended or retracted using the zipper.
4. Reversible Seat Function
The seat unit can be easily reversed to be parent-facing or forward-facing. Press the memory buttons on the sides of the seat to detach, flip, and reattach in the desired direction.
5. One-Hand Folding
The stroller features a one-hand compact fold mechanism. Press the button on the handlebar and fold the stroller into a self-standing position.
6. All-Wheel Suspension
The all-wheel suspension system provides a smooth ride across various terrains, ensuring comfort for your child.
7. Panier de rangement
The spacious storage basket is located underneath the seat. It features magnetic closures for easy access and secure storage of your belongings.
8. Brake Usage
To engage the brake, press down on the brake pedal located near the rear wheels. To release, lift the pedal. Always ensure the brake is engaged when the stroller is stationary.
9. Highchair Function
The seat can be adjusted to a highchair position, allowing the stroller to be used at table height.
10. 2-Wheel Mode
For navigating challenging terrains like sand or stairs, the stroller can be converted into a 2-wheel mode.
Entretien
Regular maintenance ensures the longevity and safety of your Cybex Priam 3 Stroller.
- Nettoyage: Essuyez le cadre avec l'étiquetteamp Un chiffon et du savon doux. Les parties en tissu peuvent être nettoyées localement ou retirées pour être lavées conformément aux instructions d'entretien.
- Roues: Vérifiez régulièrement que les roues ne sont pas obstruées et qu'elles tournent librement. Lubrifiez les essieux si nécessaire.
- Pièces mobiles: Periodically check all moving parts, locks, and fasteners to ensure they are secure and functioning correctly.
- Stockage: Rangez la poussette dans un endroit sec et frais, à l'abri de la lumière directe du soleil, afin d'éviter la décoloration et la dégradation des matériaux.
Dépannage
If you encounter any issues with your stroller, please refer to these common troubleshooting tips:
- La poussette ne se plie/déplie pas correctement : Ensure all locks are disengaged and the handlebar is in the correct position. Check for any obstructions in the folding mechanism.
- Les roues grincent : Apply a silicone-based lubricant to the wheel axles.
- Siège non inclinable : Verify that the recline mechanism is free of obstructions and is being operated correctly.
- Le frein ne s'enclenche/ne se désenclenche pas : Check for debris around the brake mechanism and ensure the pedal is fully pressed or lifted.
For further assistance, please contact Cybex customer support.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Poids de l'article | 28.1 livres |
| Taille pliée | 37.4 po L x 23.6 po l x 15.7 po H |
| Dimensions de l'article L x l x H | 36"L x 24"l x 42"H |
| Poids maximum recommandé | 55 livres |
| Type de harnais | 5 points |
| Type de poussette | Poussette standard |
| Est-ce que le siège auto est compatible ? | No (Note: Compatible with Cybex infant car seats via adapters, but not universally) |
| Nombre de porte-gobelets | 1 |
| Nombre de roues | 4 |
| Type de matériau | Aluminum, Plastic, Polyester, Rubber |
| Type de tissu | 15% Plastic, 15% Polyester, 5% Rubber, 65% Aluminum |
| Matériau du cadre | Aluminium |
| Description de la tranche d'âge | Nourrisson |
| Couleur | Indigo Blue with Chrome/Black Frame |
Caractéristiques principales :
- One-hand fold into a compact self-standing position in seconds
- One-hand recline to a near flat position while facing either direction
- Reversible seat unit can be positioned to be forward or parent facing using memory buttons
- Adjustable leather-look handlebar adapts to users of all heights
- Leather-look Bumper Bar opens to the side for easy access to the seat
Garantie et assistance
Your Cybex Priam 3 Stroller comes with a Garantie limitée de 2 ans du fabricant. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
Composants inclus :
- Châssis de poussette
- Seat Unit (with textiles)
- Housse de pluie
- Porte-gobelet
- Barre de pare-chocs
- Adaptateurs de siège d'auto
For product support, spare parts, or warranty inquiries, please visit the official Cybex website ou contactez leur service client.
