GREE XK-60

Gree XK-60 Wired Programmable Controller User Manual

For U-Match Systems

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Gree XK-60 Wired Programmable Controller. This controller is designed to interface with Gree U-Match air conditioning systems, offering precise control over your indoor climate. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

Produit terminéview

The Gree XK-60 is a wired, programmable controller featuring a backlit LCD display and intuitive button controls. It allows users to manage various functions of their U-Match system, including operating modes, temperature settings, fan speeds, and programmable timers.

Gree XK-60 Wired Programmable Controller

Description de l'image : Une face view of the Gree XK-60 wired programmable controller. The controller is white with a blue backlit LCD screen at the top. Below the screen are eight circular white buttons arranged in two rows of four. Text labels are printed below each button or pair of buttons. The GREE logo is centered between the screen and the buttons. The screen displays various icons for operating modes, fan speed, temperature, and timer settings.

Consignes de sécurité

  • Installation must be performed by a qualified and licensed HVAC technician.
  • Disconnect all power to the indoor and outdoor units before performing any wiring or maintenance.
  • Assurez-vous que tous les raccordements électriques sont conformes aux normes électriques locales et nationales.
  • N’essayez pas de réparer ou de modifier vous-même le contrôleur. Contactez un technicien qualifié.
  • Keep the controller away from water and excessive humidity.

Installation et configuration

Montage du contrôleur

The XK-60 controller is designed for wall mounting. Choose a location that is easily accessible, away from direct sunlight, heat sources, and drafts, which could affect temperature readings.

Instructions de câblage

The controller connects to the indoor unit via a wired connection.

  1. Turn off the main power supply to the U-Match system.
  2. Open the wiring cover on the indoor unit and locate the control terminal block.
  3. Connect the communication wires from the XK-60 controller to the designated terminals on the indoor unit's control board. Refer to the U-Match system's indoor unit installation manual for specific wiring diagrams.
  4. Assurez-vous que toutes les connexions sont bien fixées et correctement polarisées.
  5. Close the wiring cover and restore power to the system.

Note: Incorrect wiring can damage the controller or the U-Match system. If you are unsure, consult a professional technician.

Mode d'emploi

The Gree XK-60 controller features an LCD display and eight control buttons.

Fonctions des boutons

  • Saisir/Annuler : Confirme les sélections ou annule les opérations en cours.
  • Flèche vers le haut (▲) : Increases temperature, fan speed, or navigates menu options upwards.
  • Flèche vers le bas (▼) : Decreases temperature, fan speed, or navigates menu options downwards.
  • Fonction: Accesses advanced settings or special functions.
  • Fan: Régule la vitesse du ventilateur (Auto, Faible, Moyenne, Élevée).
  • Minuteur: Sets the On/Off timer.
  • Mode: Passe en revue les modes de fonctionnement (Auto, Refroidissement, Séchage, Chauffage, Ventilation).
  • Marche/Arrêt : Allume ou éteint l'appareil.

Indicateurs d'affichage LCD

  • Affichage de la température: Shows the current room temperature or set temperature in °F or °C.
  • Icônes du mode de fonctionnement :
    • Sun (Heat)
    • Snowflake (Cool)
    • Water Drop (Dry)
    • Fan Blade (Fan Only)
    • Auto (Automatic mode)
  • Indicateur de vitesse du ventilateur : Bar graph or specific icon showing current fan speed.
  • Indicateur de minuterie : "HOUR ON OFF" with numerical display for programmed times.
  • Special Function Indicators: "SHIELD", "MEMORY", "MASTER", "SAVE", "E-HEATER", "BLOW", "CO2", "QUIET" indicate active special features.

Fonctionnement de base

  1. Marche/Arrêt : Appuyez sur le Marche/Arrêt bouton pour allumer ou éteindre le système.
  2. Sélectionnez le mode: Appuyez sur le Mode button repeatedly to cycle through available operating modes (Auto, Cool, Dry, Heat, Fan).
  3. Température réglée : En mode froid ou chaud, utilisez le Flèche vers le haut (▲) or Flèche vers le bas (▼) boutons pour régler la température désirée.
  4. Ajustez la vitesse du ventilateur : Appuyez sur le Ventilateur button repeatedly to select the desired fan speed (Auto, Low, Medium, High).
  5. Régler la minuterie: Appuyez sur le Minuteur button to enter timer setting mode. Use the Flèche vers le haut (▲) or Flèche vers le bas (▼) buttons to set the desired ON or OFF time, then press Entrer/Annuler pour confirmer.

Fonctions avancées

To access advanced functions like "SHIELD" or "QUIET" mode, press the Fonction button. Use the arrow buttons to navigate through options and Entrer/Annuler to select or confirm. Refer to the U-Match system's specific feature documentation for detailed explanations of each advanced function.

Entretien

Nettoyage du contrôleur

  • Essuyez la surface de la manette avec un chiffon doux et sec.
  • N’utilisez pas de nettoyants abrasifs, de solvants ou de sprays chimiques, car ils peuvent endommager les composants en plastique et électroniques.
  • Ensure no liquid enters the controller casing.

System Filter Maintenance

While the controller itself does not require filter maintenance, regular cleaning or replacement of the U-Match indoor unit's air filters is crucial for optimal system performance and air quality. Refer to your U-Match indoor unit manual for filter maintenance instructions.

Dépannage

If you encounter issues with your Gree XK-60 controller, refer to the following common problems and solutions.

ProblèmeCause possibleSolution
L'écran du contrôleur est vide.No power to the unit or controller.Check the main power supply to the U-Match system. Ensure wiring connections are secure.
Controller not responding to button presses.Temporary software glitch or communication error.Turn off power to the system for a few minutes, then restore power. If the issue persists, check wiring.
Lecture de température incorrecte.Controller located near a heat source or draft.Relocate the controller if possible, or ensure no external factors are influencing the sensor.
System not operating in selected mode.Communication error with indoor unit or system fault.Check for error codes on the indoor unit. Consult a qualified technician if the problem persists.

For complex issues or error codes not listed, contact a qualified HVAC technician or Gree customer support.

Caractéristiques

  • Modèle: Gree XK-60
  • Type de contrôle : Contrôleur programmable filaire
  • Compatibilité: Gree U-Match Systems
  • Voltage: 230 volts
  • Dossier spécial : Programmable, Backlight
  • Méthode de contrôle : Contrôle des boutons
  • Dimensions du colis : Environ 13.62 x 1.54 x 0.98 pouces
  • Poids de l'article : Environ 6.7 onces

Garantie et assistance

For warranty information and technical support, please refer to the documentation provided with your Gree U-Match system or contact Gree customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Gree Customer Support: Visit the official Gree website or contact your local distributor for support.