Meike MK-XT2G Metal Hand Grip Instruction Manual

1. Produit terminéview

The Meike MK-XT2G is a metal hand grip designed specifically for the Fujifilm X-T2 camera. This accessory enhances the camera's handling and stability, particularly when using heavier lenses, by providing a more secure grip and reducing camera shake. It also serves as a replacement for the Fujifilm MHG-XT2 hand grip.

Constructed from durable metal, the grip offers robust protection for the camera's bottom. Its design allows for convenient access to the battery compartment and SD card slot without needing to remove the grip. Additionally, the integrated Arca-Swiss compatible plate facilitates quick attachment and detachment from compatible tripods.

Figure 1: Meike MK-XT2G hand grip mounted on a Fujifilm X-T2 camera, showing improved ergonomics.

2. Configuration et installation

Follow these steps to securely attach the Meike MK-XT2G hand grip to your Fujifilm X-T2 camera:

1. Préparez votre appareil photo : Ensure your Fujifilm X-T2 camera is powered off before installation.
2. Alignez la poignée : Position the Meike MK-XT2G hand grip underneath your camera, aligning the mounting screw on the grip with the tripod socket on the camera body.
3. Sécurisez la prise : Use the integrated screw on the grip's base to tighten it firmly to the camera. The grip features a lever/handle for easy tightening without additional tools. Ensure it is snug to prevent any movement.

Figure 2: Underside of the Meike MK-XT2G hand grip, highlighting the camera mounting screw and Arca-Swiss compatible base.

Once installed, the grip should remain securely in place, whether the camera is held upright or flat.

3. Fonctionnement et caractéristiques

The Meike MK-XT2G hand grip is designed to enhance your photography experience with several key features:

• Ergonomie améliorée : The extended grip, featuring an imitation leather design, provides a more comfortable and secure hold on your camera, reducing fatigue during prolonged use.
• Stabilité améliorée : The solid metal base and extended grip contribute to greater stability, which is particularly beneficial when using large or heavy lenses, helping to minimize camera shake.
• Battery and SD Card Access: The design allows full access to the camera's battery compartment and SD card slot without requiring the removal of the hand grip. This ensures uninterrupted shooting.
• Arca-Swiss Compatibility: The base of the grip is Arca-Swiss compatible, enabling quick and easy attachment and detachment from tripods and other support systems that use the Arca-Swiss standard.

Figure 3: The hand grip mounted on a tripod, demonstrating the integrated slide rail for convenient detachment.

4. Entretien

To ensure the longevity and optimal performance of your Meike MK-XT2G hand grip, follow these simple maintenance guidelines:

• Nettoyage: Essuyez régulièrement la poignée avec un chiffon doux et sec pour enlever la poussière et les traces de doigts. Pour les saletés tenaces, frottez légèrement avec un chiffon doux.amp Un chiffon peut être utilisé, suivi d'un séchage immédiat. Évitez les produits chimiques agressifs et les nettoyants abrasifs.
• Stockage: When not in use, store the grip in a clean, dry environment, away from extreme temperatures and humidity.
• Inspection: Periodically check the mounting screw for tightness. If the grip feels loose, re-tighten the screw using the integrated lever.

5. Dépannage

If you encounter any issues with your Meike MK-XT2G hand grip, consider the following common solutions:

• Grip feels loose on camera:
  • Ensure the mounting screw is fully tightened. Use the integrated lever to secure it firmly.
  • Verify that the grip is correctly aligned with the camera's tripod socket.
• Difficulty accessing battery/SD card:
  • Confirm the grip is correctly installed. The design allows for clear access to these compartments. If access is obstructed, the grip might be misaligned or not fully seated.
• Grip not fitting tripod:
  • The grip features an Arca-Swiss compatible plate. Ensure your tripod head or quick-release clamp is also Arca-Swiss compatible.
  • Check for any debris in the tripod clamp or on the grip's base that might prevent a secure fit.

6. Spécifications

Detailed specifications for the Meike MK-XT2G Metal Hand Grip:

Figure 4 : Divers views of the Meike MK-XT2G hand grip, showcasinet son design et ses fonctionnalités.

7. Garantie et assistance

For warranty information, technical support, or any inquiries regarding your Meike MK-XT2G hand grip, please refer to the official Meike webConsultez le site web ou contactez votre revendeur. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.

Fabricant: Meike

Date de mise en ligne sur Amazon : 2 octobre 2018