INTEMPO EE3358

Manuel d'utilisation du casque de jeu INTEMPO EE3358

Modèle : EE3358

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your INTEMPO EE3358 Interactive Gaming Headset. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your gaming experience.

INTEMPO EE3358 Gaming Headset, front view

Image : Avant view of the INTEMPO EE3358 Gaming Headset, showcasing its black and green design with integrated microphone.

Contenu du colis

INTEMPO EE3358 Gaming Headset
Y Splitter Adapter (for separate audio/microphone jacks)
Manuel de l'utilisateur (ce document)

Caractéristiques du produit

Microphone intégré pour la communication.
Sortie audio de haute qualité.
LED lights for enhanced aesthetics.
Comfortable over-ear design with sound isolation.
Compatible with PlayStation, Xbox, and laptops.
Wired connectivity via 3.5mm jack and USB (for LED power).
Inline volume control and microphone mute.

Instructions d'installation

1. Connecting to Consoles (PlayStation, Xbox)

The headset connects to your console via the 3.5mm audio jack. For consoles that require separate audio and microphone inputs, use the included Y splitter adapter.

Locate the 3.5mm audio port on your console controller or console unit.
If your console has a single 3.5mm port for both audio and microphone, plug the headset's 3.5mm jack directly into the port.
If your console requires separate ports for audio and microphone, connect the headset's 3.5mm jack to the Y splitter adapter, then connect the audio and microphone plugs of the adapter to the respective ports on your console.
For LED lighting, plug the USB connector into an available USB port on your console or a compatible USB power source.

Image: Close-up of the 3.5mm audio jack and USB connector for the headset.

2. Connecting to Laptops/PCs

Similar to consoles, laptops and PCs may have combined or separate audio/microphone ports.

Identify the audio and microphone ports on your laptop or PC.
If your device has a single combined 3.5mm port, plug the headset's 3.5mm jack directly.
If your device has separate audio (headphone) and microphone ports, use the Y splitter adapter to connect both.
Plug the USB connector into an available USB port on your laptop or PC to power the LED lights.

Mode d'emploi

1. Port du casque

Adjust the headband to ensure a comfortable fit over your head. The earcups are designed to sit over your ears, providing sound isolation.

Image : Gros plan view of the comfortable over-ear earcup design.

2. Microphone Adjustment

The microphone is adjustable. Position it near your mouth for optimal voice clarity. When not in use, the microphone can be rotated upwards and away from your face.

Image: The headset's microphone shown in various adjustable positions.

3. Contrôle du volume et coupure du microphone

The headset features an inline control unit on the cable for easy access to volume adjustments and microphone muting.

Molette de volume : Rotate the wheel up or down to increase or decrease the audio volume.
Commutateur de sourdine du microphone : Faites glisser le commutateur pour activer ou désactiver le microphone.

Image: Close-up of the inline control unit, showing the volume wheel and microphone mute switch.

4. Éclairage LED

The LED lights on the headset and microphone are powered by the USB connection. They will illuminate automatically when the USB is plugged into a power source.

Headset with green LED lights illuminated

Image: The INTEMPO EE3358 headset with its distinctive green LED lights active.

Entretien

Nettoyage: Utilisez un chiffon doux et sec pour nettoyer le casque. N'utilisez pas de produits nettoyants abrasifs ni de solvants.
Stockage: Rangez le casque dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes. Évitez d'emmêler le câble.
Entretien des câbles : Do not pull on the cable forcefully. Always grasp the plug when disconnecting.

Dépannage

Problème	Cause possible	Solution
Aucun son provenant du casque.	Casque mal connecté. Volume trop faible ou coupé. Sortie audio incorrecte sélectionnée sur l'appareil.	Assurez-vous que la prise jack 3.5 mm est complètement insérée. Check inline volume wheel and device volume settings. Verify headset is selected as the default audio output in your device's sound settings.
Le microphone ne fonctionne pas.	Micro coupé. Entrée microphone incorrecte sélectionnée sur l'appareil. Microphone mal positionné.	Check inline mute switch. Verify headset microphone is selected as the default input device in your device's sound settings. Rapprochez le microphone de votre bouche.
Les voyants LED ne s'allument pas.	Câble USB non connecté ou défectueux. Le port USB ne fournit pas d'alimentation.	Ensure USB cable is securely plugged into a powered USB port. Essayez un autre port USB ou une autre source d’alimentation.

Caractéristiques

Fonctionnalité	Détail
Numéro de modèle	EE3358
Marque	INTEMPO
Technologie de connectivité	Câblé
Prise pour casque	3.5 mm Jack
Caractéristiques spéciales	Lightweight, Microphone Included, LED Lighting
Placement des oreilles	Sur l'oreille
Contrôle du bruit	Isolation acoustique
Dimensions du produit	8.11 x 9.06 x 4.13 pouces (20.6 cm x 23 cm x 10.5 cm)
Poids de l'article	1.06 livre (environ 0.48 kg)
Couleur	Vert/Noir

Garantie et assistance

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact INTEMPO customer service. Keep your proof of purchase for warranty claims.

For further assistance, visit the official INTEMPO webconsultez le site ou contactez leurs services d'assistance.