1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your BASURI Musical Air Horn (Baby Shark 1.0). Please read all instructions carefully before use to ensure optimal performance and longevity of the product.
2. Produit terminéview
The BASURI Musical Air Horn (Baby Shark 1.0) is designed to provide a powerful and distinct sound for various heavy-duty vehicles. It features multiple melodies and a robust construction for durability.
Caractéristiques principales :
- 31 Super Loud Melodies (Sounds) with a honk time of 6-8 seconds, dependent on the tone of the horns.
- Constructed from Aluminium, Stainless Steel, and Nylon materials for durability.
- Compatible with buses, trucks, and heavy-duty vehicles (12V/24V).
- Features PVC diaphragms resistant to rust.
- Manifold-less design for easy and flexible installation.
- Includes a heavy-duty turbo controller for faster melody changes.
Contenu de la boîte :
- Complete wiring kit (Cable length: +/- 4 meters from the receiver to the receiver).
- 6 Horns.
- Controller with seven-segment display.
- 6 mm connection for air hose.
- Pre-assembled mounted horns for quick installation.

3. Consignes de sécurité
Always prioritize safety during installation and operation. Failure to follow safety guidelines may result in injury or damage to the product or vehicle.
- Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock.
- Portez un équipement de protection individuelle (EPI) approprié, tel que des lunettes de sécurité et des gants.
- The horn produces a loud sound (130 DB). Avoid prolonged exposure to prevent hearing damage.
- Assurez-vous que toutes les connexions sont bien fixées et correctement isolées afin d'éviter les courts-circuits.
- Mount the horns and compressor in a location protected from direct water spray and excessive heat.
4. Configuration et installation
The manifold-less design allows for flexible installation. Follow these steps for proper setup:
4.1. Mounting the Horns
- Select a suitable location on your vehicle that is clear of obstructions and protected from road debris and water.
- Ensure the mounting surface is strong enough to support the weight of the horns.
- Use the provided pre-assembled mounting brackets to secure the horns.

4.2. Connexion du tuyau d'air
- Connect the 6 mm air hose to the designated air inlet on the horn assembly.
- Ensure a tight and secure connection to prevent air leaks, which can affect horn performance.
4.3. Câblage électrique
- Connect the provided wiring kit to the horn assembly and the vehicle's power source (12V or 24V, depending on your vehicle).
- Follow the wiring diagram provided with the product for correct connections.
- Connect the controller to the wiring harness.

4.4. Tutoriel vidéo d'installation
For a visual guide on the primary installation process, please refer to the video below:
5. Mode d'emploi
The BASURI Musical Air Horn is operated via its dedicated controller. The controller allows you to select and change between the available melodies.
5.1. Using the Turbo Controller
- The heavy-duty controller features a seven-segment display to indicate the selected melody.
- Use the up and down buttons on the controller to cycle through the 31 available melodies.
- The turbo function enables faster changes between melodies.
- Press the horn button to activate the selected melody.
5.2. Melody Demonstration
Experience the range of 31 super loud melodies available with your air horn:
6. Entretien
Regular maintenance ensures the longevity and optimal performance of your air horn.
- Periodically check all air hose connections for leaks. Tighten or replace hoses as needed.
- Inspect electrical wiring for any signs of wear, fraying, or corrosion. Repair or replace damaged wiring promptly.
- Keep the horn trumpets clean and free from debris. Dust and dirt can affect sound quality.
- Ensure the PVC diaphragms are intact and free from damage.
7. Dépannage
If you encounter issues with your air horn, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Le klaxon ne sonne pas. | No power, loose wiring, air leak, faulty compressor/valve. | Check power connections, ensure wiring is secure, inspect air hoses, test compressor/valve. |
| Son faible ou déformé | Low air pressure, partial air leak, debris in horn, damaged diaphragm. | Check air supply, inspect air hoses, clean horn trumpets, inspect diaphragms for damage. |
| Melodies not changing | Faulty controller, wiring issue to controller. | Check controller connections, ensure controller is functioning correctly. |
8. Spécifications
| Spécification | Valeur |
|---|---|
| Marque | BASURI |
| Modèle | Baby Shark 1.0 |
| Voltage | 12 / 24 Volt |
| Niveau de bruit | 130 décibels |
| Dimensions de l'article (L x l x H) | 21.26 x 4.72 x 15.75 pouces |
| Poids de l'article | 6.6 livres |
| Matériel | Aluminium, acier inoxydable, nylon |
| Numéro de pièce OEM | Cha007 |
| Type d'ajustement automobile | Ajustement universel |
9. Garantie et assistance
Your BASURI Musical Air Horn (Baby Shark 1.0) is backed by a one-year manufacturer's warranty.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BASURI customer support through the retailer where the product was purchased or visit the official BASURI website.