Meliconi AT55
Meliconi AT55 AmpManuel d'utilisation de l'antenne TV intérieure saturée
Model: AT55 (881016)
1. Introduction
The Meliconi AT55 is an amplified indoor TV antenna designed for optimal reception of digital terrestrial television (DVB-T), high-definition DVB-T (DVB-T HD), and digital radio (DAB+) signals. This antenna is equipped with special filters to minimize interference from 4G and 5G signals and is prepared for DVB-T2 HEVC reception. Its advanced internal amplification circuit ensures a low noise figure of less than 1 dB, contributing to clear signal quality.
This manual provides essential information for the correct installation, operation, and maintenance of your Meliconi AT55 antenna.
2. Consignes de sécurité
- Lisez toutes les instructions avant utilisation et conservez-les pour référence future.
- N’exposez pas l’antenne à la pluie ou à l’humidité.
- Assurer l'alimentation voltage correspond aux exigences spécifiées sur l'adaptateur.
- Disconnect the power adapter during lightning storms or when unused for extended periods.
- Do not attempt to open or modify the antenna. Refer all servicing to qualified personnel.
- Keep the antenna away from heat sources and direct sunlight.
- Place the antenna on a stable, flat surface to prevent it from falling.
3. Contenu du colis
Veuillez vérifier que tous les éléments suivants sont inclus dans votre colis :
- Meliconi AT55 AmpAntenne TV intérieure lifiée
- AC/DC Power Adapter (230V)
- Câble d'alimentation USB (5V)
- Manuel d'instructions
4. Installation
Follow these steps to set up your Meliconi AT55 antenna:
- Emplacement de l'antenne : Position the antenna in an optimal location, ideally near a window and away from large metal objects or other electronic devices that could cause interference. Experiment with different positions to find the best signal reception.
- Connect to TV/Decoder: Connect the antenna's coaxial cable to the 'Antenna In' or 'RF In' port on your television or digital terrestrial decoder.
- Connexion électrique : L'antenne peut être alimentée de deux manières :
- Via AC Adapter: Connect the included AC/DC power adapter to the antenna's power input port and then plug the adapter into a standard wall outlet.
- Par USB : Connect the included USB power cable to the antenna's USB input port. Then, connect the other end of the USB cable to a free USB port on your TV or decoder (if compatible and provides 5V power).
- Balayage des chaînes : Access the menu on your TV or decoder and perform an automatic channel scan. Refer to your TV or decoder's manual for specific instructions on how to do this.
Image 1: Arrière view of the Meliconi AT55 antenna, illustrating the power input and coaxial cable connection points. The antenna features a curved black design with a sturdy base.
Image 2: Devant view of the Meliconi AT55 antenna, showcasing its sleek, curved black design. The Meliconi logo is subtly visible on the lower left portion of the antenna's face.
5. Mode d'emploi
Once the antenna is set up and channels are scanned, operation is straightforward:
- Sélection des chaînes : Use your TV or decoder remote control to select desired channels.
- Optimisation du signal : If you experience poor signal quality on certain channels, try slightly adjusting the antenna's position or orientation. Perform another channel scan after significant adjustments.
- Indicateur d'alimentation : The antenna typically features an LED indicator to confirm it is receiving power.
6. Entretien
The Meliconi AT55 antenna requires minimal maintenance:
- Nettoyage: Wipe the antenna with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Stockage: If storing the antenna for an extended period, disconnect it from power and store it in a cool, dry place.
7. Dépannage
Si vous rencontrez des problèmes avec votre antenne, reportez-vous au guide de dépannage suivant :
| Problème | Cause possible | Solution |
|---|---|---|
| Aucun signal ou mauvaise qualité d'image |
|
|
| Interference from mobile signals (4G/5G) | Antenna is designed with built-in filters. | The AT55 includes integrated 4G and 5G interference filters. Ensure the antenna is powered correctly for the amplifier and filters to function optimally. |
| Antenna not powering on |
|
|
8. Spécifications
- Marque: Méliconi
- Numéro de modèle : 881016
- Type de produit: AmpAntenne TV intérieure lifiée
- Couleur: Noir
- Compatibilité: Radio TNT (DVB-T), TNT HD (DVB-T HD), TNT2 HEVC, DAB+
- Gamme de fréquences : VHF (174 ~ 230 MHz), UHF (470 ~ 694 MHz)
- Interference Filters: 4G, 5G
- Facteur de bruit : <1 dB
- Portée maximale : Portée jusqu'à 30 km du répéteur
- Alimentation: AC/DC Adapter (230V) or USB (5V)
- Dimensions (L x l x H) : 27.5 cm x 5.5 cm x 13.1 cm
- Marques de téléviseurs compatibles : Samsung, LG, Sony, Philips, Panasonic, United, Telefunken, Hitachi, Haier, OK, Kennex, Toshiba, Sharp, Thomson
9. Garantie et assistance
Meliconi products are manufactured to high-quality standards and come with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact Meliconi customer support.
For technical assistance or support, please contact Meliconi directly:
- E-mail: info@meliconi.com
- Téléphone: +39 051 68211
Image 3: Meliconi technical support contact details, including email address and phone number, for customer assistance.