PIXEL RW-221 CB1 Wireless Shutter Release Remote Control User Manual

1. Introduction

The PIXEL RW-221 CB1 is a high-performance wireless shutter release remote control designed to provide photographers with enhanced flexibility and control over their Olympus digital cameras. Utilizing FSK 2.4GHz wireless technology, this device ensures reliable and stable remote operation, minimizing camera shake and enabling various shooting modes from a distance.

This remote control supports single shooting, continuous shooting, Bulb mode for long exposures, and a 4-second delay shooting mode. Its interchangeable cable design allows for compatibility with different camera brands and models by simply changing the connecting cable. The system consists of a transmitter and a receiver, both powered by easily replaceable AAA batteries, offering extended operational life.

Appareils photo compatibles : Olympus E-1, E-10, E-20, E-3, E-5.

2. Contenu du colis

Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :

• RW-221 Transmitter (x1)
• RW-221 Receiver (x1)
• Shutter Connecting Cable (x1)
• Manuel d'utilisation (x1)

Remarque : les piles AAA ne sont pas incluses et doivent être achetées séparément.

Image: The PIXEL RW-221 CB1 Wireless Shutter Release Remote Control, showing the transmitter, receiver, and connecting cable.

3. Installation

3.1 Installation de la batterie

Both the transmitter and receiver require two AAA batteries each. Ensure correct polarity when inserting batteries.

• Open the battery compartment cover on both the transmitter and receiver.
• Insert two AAA batteries into each unit, aligning them with the '+' and '-' indicators inside the compartment. For the receiver, note that the two springs are on the same side, so ensure correct orientation.
• Fermez soigneusement les couvercles du compartiment à piles.

Image : détaillée view of the battery compartments for both the transmitter and receiver, illustrating correct AAA battery insertion.

3.2 Connexion à votre caméra

The receiver connects to your camera's remote control port. The transmitter communicates wirelessly with the receiver.

• Attach the receiver to your camera's hot shoe. This provides a secure mounting point but does not affect flash operation as the shutter release does not use the hot shoe interface for electrical connection.
• Connect one end of the provided shutter connecting cable to the receiver.
• Connect the other end of the shutter connecting cable to the remote control port on your Olympus camera.
• Assurez-vous que l'émetteur et le récepteur sont tous deux sous tension.

Image: An illustration of the interchangeable shutter connecting cables, highlighting the CB1 cable for Olympus cameras.

4. Mode d'emploi

The PIXEL RW-221 CB1 offers multiple shooting modes for various photographic needs.

4.1 Basic Shutter Operation

L'émetteur comporte deuxtagbouton obturateur :

• Demi-pression : Press the shutter button halfway down to activate autofocus. The indicator light on the transmitter will turn green.
• Pleine pression : Press the shutter button completely down to trigger the camera's shutter. The indicator light will turn red.

Image: A visual guide to the transmitter's half-press (focus) and full-press (shutter) functions, indicated by green and red lights respectively.

4.2 Modes de prise de vue

The RW-221 CB1 supports the following shooting modes:

• Prise de vue unique : Set your camera to single shot mode and the transmitter to single shot mode. Press the transmitter's shutter button fully to capture a single image.
• Prise de vue en continu: Set your camera to continuous shooting mode and the transmitter to continuous shot mode. Press and hold the transmitter's shutter button to capture a series of images. The number of frames per second depends on your camera's settings.
• Mode Bulb (longue exposition) : Set your camera to Bulb mode and the transmitter to Bulb mode. Press the transmitter's shutter button once to open the shutter, and press it again to close the shutter, allowing for custom long exposure times.
• Prise de vue avec retardateur de 4 secondes : Set your camera to single shooting mode and the transmitter to 4-second delay shooting mode. Press the transmitter's shutter button fully; the camera will capture an image after a 4-second delay.

Image: Demonstrates the wireless connection capability, showing two cameras simultaneously controlled by the remote for capturing a scene.

Image: An 'Anti-Shake' comparison, showing the improvement in image clarity when using the remote control to prevent camera movement during exposure.

5. Entretien

To ensure the longevity and optimal performance of your PIXEL RW-221 CB1 Wireless Shutter Release Remote Control, follow these maintenance guidelines:

• Nettoyage: Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or solvents, as they may damage the electronics.
• Stockage: When not in use for extended periods, remove the batteries from both the transmitter and receiver to prevent leakage and corrosion. Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Autonomie de la batterie : The included AAA batteries can provide approximately 400 hours of operation. Replace batteries promptly when performance degrades or the indicator light fails to illuminate.
• Manutention: Handle the remote control with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.

6. Dépannage

If you encounter issues with your PIXEL RW-221 CB1, please refer to the following common problems and solutions:

• L'appareil ne répond pas :
  • Vérifiez que les piles sont correctement installées et suffisamment chargées. Remplacez-les si nécessaire.
  • Assurez-vous que l'émetteur et le récepteur sont tous deux sous tension.
  • Verify that the shutter connecting cable is securely plugged into both the receiver and the camera's remote port.
• Camera not triggering:
  • Confirm that your camera is set to the appropriate shooting mode (e.g., single shot, continuous, Bulb).
  • Vérifiez que la fonction de télécommande de l'appareil photo est activée dans ses paramètres, le cas échéant.
  • Check the distance between the transmitter and receiver. The effective transmission distance is typically 100 meters or more in open areas. Obstacles may reduce this range.
• Connexion intermittente :
  • Interference from other 2.4GHz devices might affect performance. Try changing your location or reducing interference sources.
  • Ensure the receiver is not obstructed on the camera's hot shoe.

Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client pour obtenir de l'aide supplémentaire.

7. Spécifications

8. Garantie et assistance

8.1 Informations sur la garantie

This PIXEL product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

8.2 Assistance clientèle

For technical assistance, troubleshooting, or warranty inquiries, please contact the retailer where you purchased the product or visit the official PIXEL website for support resources. When contacting support, please have your product model (RW-221 CB1) and purchase details ready.