SKROSS 1.103175

SKROSS PRO World Travel Adapter (Model 1.103175) Instruction Manual

Brand: SKROSS | Model: 1.103175

Introduction

The SKROSS PRO World Travel Adapter is designed to provide a reliable mains connection for your electronic devices when traveling internationally. This adapter is compatible with 2-pole and 3-pole earthed plugs, ensuring your tablets, cameras, and other devices remain powered across various global destinations. It is important to note that this adapter does not convert voltage.

Caractéristiques du produit

  • Universal compatibility for 2-pole and 3-pole earthed plugs.
  • Integrated fuse for enhanced safety.
  • Retractable plugs for various international standards (USA, UK, Europe, Australia/China).
  • Conception compacte et légère pour la portabilité.
  • Designed in Switzerland.

Configuration et installation

Before using the SKROSS PRO World Travel Adapter, ensure your device's voltage is compatible with the local power supply. This adapter does not convert voltage.

  1. Identify the Required Plug Type: Determine the plug standard for your travel destination. The adapter features sliders on its side to extend the appropriate pins.
  2. Déroulez la prise correcte : Gently slide the corresponding button on the side of the adapter to extend the desired plug pins (e.g., USA, UK, Europe, Australia/China). Ensure the pins are fully extended and locked into place.
  3. Connectez votre appareil : Plug your device's power cord into the universal socket on the front of the adapter. The adapter accommodates both 2-pole and 3-pole earthed plugs.
  4. Insert into Wall Socket: Carefully insert the extended adapter plug into the wall socket.
  5. Using the PRO World Adapter with the PRO Light USB (if applicable): If you have the PRO Light USB attachment (sold separately), it can be connected to the universal socket of the PRO World Adapter to provide additional USB charging ports.
SKROSS PRO World Travel Adapter, front view

Figure 1 : Face avant view of the SKROSS PRO World Travel Adapter.

SKROSS PRO World Travel Adapter, top view showing universal socket

Figure 2 : Haut view showing the universal socket for device connection.

Mode d'emploi

The SKROSS PRO World Travel Adapter is straightforward to operate once correctly set up.

  1. Appareils d'alimentation : After inserting the adapter into the wall socket and your device into the adapter, power will be supplied to your device.
  2. Changing Plug Types: To change the plug type, first unplug the adapter from the wall socket. Then, retract the currently extended pins by sliding their respective buttons back. Extend the new desired plug pins as described in the Setup section.
SKROSS PRO World Travel Adapter with USA plug extended

Figure 3: Adapter with USA plug extended.

SKROSS PRO World Travel Adapter with UK plug extended

Figure 4: Adapter with UK plug extended.

SKROSS PRO World Travel Adapter with EU plug extended

Figure 5: Adapter with EU plug extended.

SKROSS PRO World Travel Adapter side view showing plug selection sliders

Figure 6 : Côté view illustrating the plug selection sliders.

Entretien

  • Nettoyage: Clean the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Stockage: Store the adapter in a cool, dry place when not in use. Ensure all plug pins are retracted before storage.
  • Remplacement du fusible : The adapter features an integrated fuse. If the adapter stops functioning, the fuse may need replacement. Refer to the detailed instructions provided with the product for fuse replacement procedures.

Dépannage

L'appareil ne s'allume pas :
  • Assurez-vous que l'adaptateur est complètement inséré dans la prise murale.
  • Verify that your device's plug is securely inserted into the adapter's universal socket.
  • Check if the correct plug type for the region is fully extended and locked.
  • Vérifiez que le volume de votre appareiltage is compatible with the local power supply (the adapter does not convert voltaget).
  • Inspect the adapter's fuse. If blown, replace it according to the manufacturer's instructions.
Adapter feels loose in the wall socket:
  • Some wall sockets may be worn or have a loose fit. If the adapter feels unstable, consider using a different socket or providing support to prevent it from falling out.

Caractéristiques

Numéro de modèle1.103175
Dimensions du produit (L x l x H)2.8 x 2.6 x 2.2 pouces
Poids de l'article6.4 onces
Vol d'entréetage250 volts
CouleurBlanc
FabricantSkross

Garantie et assistance

For warranty information, technical support, or inquiries regarding your SKROSS PRO World Travel Adapter, please refer to the documentation included in the product packaging or visit the official SKROSS webLes coordonnées du service client sont généralement disponibles sur le site du fabricant. website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.