Manuel d'utilisation du compteur d'énergie CHACON EcoWatt 650

Introduction

This manual provides comprehensive instructions for the safe and efficient use of your CHACON EcoWatt 650 Energy Meter. This device is designed to help you monitor and understand your electricity consumption, enabling better energy management and potential energy savings.

Consignes de sécurité

• Veuillez lire attentivement toutes les instructions avant d'utiliser l'appareil.
• Do not disassemble, modify, or attempt to repair the device. Refer servicing to qualified personnel.
• Assurez-vous que l'appareil est branché sur une prise électrique correctement mise à la terre.
• N’exposez pas l’appareil à l’eau, à l’humidité ou à des températures extrêmes.
• Gardez l’appareil hors de portée des enfants.
• The maximum load for this device is 3.5 kW (3500 Watts) and 6 Amps. Do not exceed these limits to prevent damage or safety hazards.

Contenu du colis

• CHACON EcoWatt 650 Energy Meter (Main Unit with Plug)
• Remote Display Unit with 1.20m Cable
• Manuel de l'utilisateur (ce document)

Produit terminéview

The CHACON EcoWatt 650 consists of two main parts: a main unit that plugs into a wall socket and provides an outlet for your appliance, and a remote display unit connected by a 1.20-meter cable.

Figure 1 : CHACON EcoWatt 650 Energy Meter, illustrating the main plug-in unit on the left and the remote display unit on the right, connected by a white cable.

Figure 2 : Gros plan view of the remote display unit, highlighting the LCD screen and control buttons (SET, TOTAL/V, UP/DOWN, MODE, RESET) at the bottom.

Composants clés :

• Unité principale : This component plugs directly into a standard wall socket and features an integrated outlet for connecting the appliance you wish to monitor.
• Remote Display Unit: Equipped with an LCD screen and push-button controls, this unit displays various data points. It is connected to the main unit via a 1.20-meter cable, allowing flexible placement.
• Boutons de contrôle : The display unit includes buttons labeled SET, TOTAL/V, UP/DOWN (indicated by triangle symbols), MODE, and RESET for navigation and configuration.

Installation

1. Déballer: Carefully remove the CHACON EcoWatt 650 Energy Meter and its components from the packaging.
2. Connexion à l'alimentation : Plug the main unit of the EcoWatt 650 into a standard, grounded wall outlet.
3. Connexion de l'appareil : Plug the electrical appliance you intend to monitor into the outlet provided on the main unit of the EcoWatt 650.
4. Affichage initial : The remote display unit should power on automatically, showing initial readings or a default screen.
5. Support mural (en option) : The remote display unit can be wall-mounted for convenience. Use appropriate fasteners (not included) for secure installation.

Opération

Surveillance de base

Once properly connected, the EcoWatt 650 will immediately begin monitoring the power consumption of the connected appliance. The display will show various data points, which can be cycled through manually.

Setting Time and Tariff

1. Appuyez sur le ENSEMBLE bouton pour accéder au mode paramètres.
2. Utilisez le HAUT/BAS buttons (triangle symbols) to adjust values such as time, day, and tariff rates.
3. Presse ENSEMBLE again to confirm your selection and proceed to the next setting option.
4. The device supports an adjustable double rate feature, allowing for cost calculations based on different electricity tariffs (e.g., peak and off-peak hours). Consult your electricity provider for specific tariff details.

Navigation dans les modes d'affichage

Appuyez sur le MODE button repeatedly to cycle through the available display screens and view different measurement parameters:

• Puissance (watts) : Affiche la consommation électrique instantanée de l'appareil connecté.
• Consommation (kWh): Shows the total accumulated energy consumption over time.
• Voltage (Volt) : Indicates the current line voltage from the electrical outlet.
• Ampavant (Amps): Displays the current draw of the connected appliance.
• Coût: Provides a calculated cost based on the accumulated consumption and the configured tariff rates.

Réinitialisation des données

To clear all accumulated data, including total consumption and calculated cost, press the RÉINITIALISER button. This action is useful when you wish to start a new monitoring period or clear erroneous readings.

Entretien

• Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs, de solvants ni n'immergez l'appareil dans l'eau.
• Stockage: Lorsqu'il n'est pas utilisé pendant une période prolongée, rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
• Inspection: Periodically inspect the power cable and plug for any signs of damage, fraying, or loose connections. Discontinue use if damage is observed.

Dépannage

Display is blank or not showing readings.

Ensure the main unit is securely plugged into a live wall outlet. Verify that the appliance is correctly connected to the meter and is drawing power. Check if the wall outlet itself is functional.

Readings appear incorrect or inconsistent.

Confirm that the connected appliance is operating normally. If cost calculations are inaccurate, review and adjust the tariff settings. Try performing a full reset of the device.

Device does not respond to button presses.

Appuyez sur le RÉINITIALISER button. If the issue persists, unplug the entire unit from the wall outlet for a few minutes, then plug it back in to perform a hard reset.

Caractéristiques

Garantie et assistance

For detailed warranty information, terms and conditions, and technical support, please refer to the documentation provided with your original purchase. You may also visit the official CHACON website for further assistance. Please retain your proof of purchase for any warranty claims.