D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) User Manual

1. Produit terminéview

The D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) is designed to eliminate Wi-Fi dead zones and extend the coverage of your existing home wireless network. It offers AC750 performance, providing bandwidth up to 300Mbps on the 2.4GHz band and 433Mbps on the 5GHz band. This dual-band technology helps reduce interference from nearby wireless signals, ensuring a faster and more reliable connection for all your devices. The compact wall-plug design allows for flexible placement without requiring additional power cables.

Caractéristiques principales

• Extends the coverage of your home's existing wireless network.
• Up to 750 Mbps combined speed (300 Mbps 2.4GHz and 433 Mbps 5GHz).
• High-speed wireless AC connectivity for laptops, smartphones, and tablets.
• Adds dual-band coverage to existing single-band routers.
• Compatible with any wireless router brand.
• Compact wall-plug design for easy placement.
• WPA2/WPA wireless encryption for secure connections.
• Wi-Fi Protected Setup (WPS) for secure setup with a button press.

Figure 1 : Face avant view of the D-Link DAP-1520 Range Extender.

Figure 2 : Face avant view of the D-Link DAP-1520 with LED indicator.

2. Instructions de configuration

Avant de commencer

• Ensure your existing wireless router is powered on and functioning correctly.
• Note down your Wi-Fi network name (SSID) and password from your main router.
• Place the DAP-1520 in an electrical outlet near your wireless router for initial setup.

Méthode 1 : WPS (Wi-Fi Protected Setup)

1. Plug the DAP-1520 into a power outlet. Wait for the LED indicator to turn amber.
2. Appuyez sur le bouton WPS de votre routeur sans fil.
3. Within two minutes, press the WPS button on the side of the DAP-1520.
4. The LED indicator on the DAP-1520 will flash green, then turn solid green when a secure connection is established.
5. Once connected, you can unplug the DAP-1520 and move it to a location between your router and the Wi-Fi dead zone. Ensure the LED remains solid green for optimal signal.

Figure 3 : Côté view of the D-Link DAP-1520 showing the WPS button.

Method 2: D-Link QRS Mobile App Setup

1. Download the D-Link QRS Mobile app from the App Store (iOS) or Google Play (Android) on your smartphone or tablet.
2. Plug the DAP-1520 into a power outlet.
3. Open the QRS Mobile app and follow the on-screen instructions to connect to the DAP-1520 and configure it to extend your Wi-Fi network.

Méthode 3 : Web Configuration du navigateur

1. Plug the DAP-1520 into a power outlet.
2. On a computer or mobile device, connect to the DAP-1520's default Wi-Fi network (e.g., 'dlink-xxxx'). The default Wi-Fi name and password can be found on the configuration card or the device label.
3. Ouvrir un web navigateur et accédez à http://dlinkap.local/ or the IP address 192.168.0.50.
4. Follow the on-screen setup wizard to configure the extender. You will be prompted to select your existing Wi-Fi network and enter its password.
5. Once configured, the DAP-1520 will restart. Reconnect your devices to the extended network.

3. Fonctionnement

Comprendre l'indicateur LED

• Vert uni : The extender is connected to your router and providing a strong Wi-Fi signal.
• Ambre massif : The extender is connected to your router but the signal strength is weak. Consider moving the extender closer to your router.
• Ambre clignotant : The extender is booting up or attempting to connect to your router.
• Désactivé: The extender is not powered on or is not connected to a network.

Connecting Devices to the Extended Network

After successful setup, the DAP-1520 will broadcast an extended Wi-Fi network. This network will typically have the same name as your main router's Wi-Fi network with '_EXT' appended (e.g., 'MyWiFi_EXT'). Connect your wireless devices (laptops, smartphones, tablets) to this extended network using your existing Wi-Fi password.

4. Entretien

Mises à jour du firmware

Vérifiez régulièrement le support D-Link website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided on the D-Link website for updating your device's firmware.

Nettoyage

Pour nettoyer l'appareil, débranchez-le de la prise électrique. Essuyez l'extérieur avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni d'aérosols.

Réinitialisation de l'appareil

If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset. With the device powered on, use a paperclip to press and hold the reset button (located near the WPS button) for approximately 10 seconds. The LED indicator will flash, and the device will revert to its factory default settings.

5. Dépannage

This section addresses common issues you might encounter with your D-Link DAP-1520.

No Internet Connection Through Extender

• Vérifier l'état de la LED : Ensure the LED indicator is solid green. If it's amber, move the extender closer to your main router.
• Vérifier la connexion du routeur : Confirm your main router has an active internet connection.
• Réinitialisation : Try performing the setup process again, ensuring correct Wi-Fi password entry.

Poor Signal Strength or Slow Speeds

• Déplacer le prolongateur : Position the extender roughly halfway between your router and the area with poor signal. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
• Vérifiez les interférences : Other wireless devices (cordless phones, microwaves) operating on the same frequency can cause interference.
• Performances du routeur : Assurez-vous que votre routeur principal fonctionne de manière optimale.

Cannot Access Setup Page (dlinkap.local)

• Connexion directe : Ensure your device is connected to the DAP-1520's default Wi-Fi network (e.g., 'dlink-xxxx') before attempting to access the setup page.
• Alternative IP: Essayez d'accéder http://192.168.0.50 if http://dlinkap.local/ ne fonctionne pas.
• Vider le cache du navigateur : Effacez votre web Videz le cache et les cookies de votre navigateur, ou essayez un autre navigateur.

For more detailed troubleshooting, please refer to the full manual available on the official D-Link support website.

6. Spécifications techniques

Figure 4: Network coverage diagram and technical specifications.

7. Garantie et assistance

Informations sur la garantie

The D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) comes with a Garantie limitée de 1 ans. Please refer to the warranty card included with your product or visit the D-Link website pour connaître les conditions générales complètes de la garantie.

Assistance technique

Pour obtenir une assistance technique, enregistrer votre produit ou télécharger les pilotes et micrologiciels les plus récents, veuillez consulter le site d'assistance officiel de D-Link. website:

www.dlink.com/support

You may also find helpful resources, FAQs, and community forums on the D-Link website.