Introduction
Thank you for choosing the T'nB Clicky Wireless Mouse. This manual provides essential information for the proper setup, operation, and maintenance of your new wireless mouse. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
The T'nB Clicky Wireless Mouse offers easy, quick, and very simple installation with Plug & Play functionality, requiring no software installation. Its ergonomic design ensures a comfortable grip. This mouse features an automatic stand-by system for energy saving, eliminating the need for an on/off button. It utilizes 2.4GHz radio frequency wireless technology and has a 1200 DPI optical sensor.
Consignes de sécurité
- N’exposez pas la souris à des températures extrêmes, à l’humidité ou à la lumière directe du soleil.
- Évitez de laisser tomber la souris ou de la soumettre à des impacts violents.
- Ne tentez pas de démonter ou de modifier la souris. Cela annulera la garantie.
- Gardez la souris et ses composants hors de portée des enfants.
- Jetez les piles conformément aux réglementations locales.
Contenu du colis
Vérifiez que tous les articles sont présents dans le colis :
- 1 x T'nB Clicky Wireless Mouse
- 1 x USB Receiver (Note: The USB receiver is typically delivered inside or along with the mouse, often in the battery compartment.)
- 1 pile AAA (incluse)
Image: The T'nB Clicky Wireless Mouse shown alongside its compact USB receiver.
Installation
Installation de la batterie
Locate the battery compartment on the underside of the mouse. Open the compartment cover. Insert the provided AAA battery, ensuring the polarity (+/-) matches the diagram inside the compartment. Close the cover securely.
Image : inclinée view of the T'nB Clicky Wireless Mouse, illustrating its ergonomic shape and the general area of the battery compartment on the underside.
Connexion du récepteur USB
Remove the USB receiver from its storage slot, usually located within the battery compartment or near it. Plug the USB receiver into an available USB port on your computer. The system will automatically detect and install the necessary drivers (Plug & Play).
Image : Vue de dessus view of the T'nB Clicky Wireless Mouse, clearly showing the scroll wheel and left/right click buttons, with the USB receiver detached and positioned above the mouse.
Mode d'emploi
Marche/Arrêt
The T'nB Clicky Wireless Mouse does not have a manual on/off switch. It features an automatic stand-by system. Simply plug in the USB receiver and the mouse will become active when moved or a button is clicked. It will enter a low-power sleep mode after a period of inactivity to conserve battery life.
Fonctions de base
- Click gauche: Sélection et activation primaires.
- Clic-droit: Ouvre les menus contextuels.
- Molette: Documents et rouleaux web pages vertically. Can also be clicked for middle-click functionality (application dependent).
DPI (points par pouce)
The mouse operates at 1200 DPI, providing a good balance of speed and precision for general use.
Entretien
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer la surface de la souris. Pour les saletés tenaces, un chiffon légèrement plus sec peut être utile.amp cloth can be used, but ensure no moisture enters the mouse. Do not use harsh chemicals or abrasive cleaners.
- Remplacement de la batterie : When the mouse performance degrades or it stops responding, replace the AAA battery. Ensure correct polarity.
- Stockage: When not in use for extended periods, it is recommended to remove the battery to prevent leakage. Store the USB receiver in its designated slot within the mouse to prevent loss.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La souris ne répond pas. | Batterie faible ou morte. | Remplacez la pile AAA. |
| La souris ne répond pas. | Récepteur USB mal connecté. | Vérifiez que le récepteur USB est bien branché sur un port USB fonctionnel. Essayez un autre port USB. |
| Mouse cursor erratic or jumpy. | Capteur optique sale ou surface inadaptée. | Clean the optical sensor on the underside of the mouse. Use the mouse on a clean, non-reflective, opaque surface or a mouse pad. |
| Short wireless range or interference. | Obstacles between mouse and receiver, or other wireless devices. | Move the mouse closer to the USB receiver. Ensure no large metal objects are between them. Move other 2.4GHz wireless devices further away. |
| Mouse does not enter standby. | Constant movement or sensor interference. | Ensure the mouse is placed on a stable surface and not being inadvertently moved. |
Caractéristiques
- Modèle: MS2UW
- Technologie de connectivité: Wireless (USB, Funk 2.4GHz Radio Frequency)
- Technologie de détection de mouvement : Optique
- DPI: 1200 DPI
- Couleur: Noir
- Source d'alimentation : 1 pile AAA (incluse)
- Dimensions du produit : 1.77 x 3.39 x 5.51 pouces (4.5 x 8.6 x 14 cm)
- Poids de l'article : 2.46 onces (70 grammes)
- Dossier spécial : Automatic Stand-by System, Plug & Play
- Fabricant: T'nB
- Date de mise en ligne sur Amazon : 6er mars 2015
Garantie et assistance
T'nB products are designed and manufactured to the highest quality standards. For information regarding warranty terms, technical support, or customer service, please refer to the official T'nB webConsultez notre site ou contactez votre détaillant local.
Pour obtenir de l'aide supplémentaire, veuillez consulter le T'nB official website.