Urmet 1128/500 Outdoor Intercom Station

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Urmet 1128/500 Outdoor Intercom Station. Please read this manual thoroughly before attempting to install or operate the device. Keep this manual for future reference.

2. Produit terminéview

The Urmet 1128/500 is an outdoor intercom station designed for 4+n wire intercom systems. It supports both electronic and traditional calling methods and can be integrated into systems with one or more entrances. This unit is equipped with an electronic microphone and includes a mechanical adapter for compatibility with various push-button panels, including Exigo, 725, and 625 series. It serves as a direct replacement for the 5150/500 outdoor station.

Image showing the Urmet 1128/500 outdoor intercom station, featuring its compact design and electronic microphone.

3. Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures et les dommages à l'appareil :

• Sécurité électrique : Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Disconnect power before installation or maintenance.
• Conditions environnementales : Do not expose the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. While designed for outdoor use, it is not waterproof.
• Manutention: Manipulez l'appareil avec précaution. Évitez de le faire tomber ou de le soumettre à des chocs violents.
• Modifications: Do not attempt to modify or repair the device yourself. Unauthorized modifications may void the warranty and pose safety risks.

4. Contenu du colis

Vérifiez que tous les composants sont présents dans le package :

• Urmet 1128/500 Outdoor Intercom Station
• Electronic Microphone (integrated)
• Mechanical Adapter
• Manuel de l'utilisateur (ce document)

5. Installation

Follow these general steps for installing the Urmet 1128/500 outdoor intercom station:

1. Coupure de courant : Ensure that the main power supply to the intercom system is completely disconnected before beginning any installation work.
2. Emplacement de montage : Choose a suitable outdoor location for the station, ensuring it is protected from direct heavy rain and accessible for users.
3. Câblage : Connect the 4+n wires from your intercom system to the appropriate terminals on the 1128/500 unit. Refer to the specific wiring diagram provided with your complete intercom system for detailed connections. Ensure all connections are secure and properly insulated.
4. Mechanical Adapter: If integrating with Exigo, 725, or 625 series push-button panels, use the provided mechanical adapter to ensure a secure and flush fit.
5. Montage sécurisé : Mount the outdoor station securely to the wall or panel using appropriate fasteners.
6. Rétablissement du courant : Once all connections are verified and the unit is securely mounted, reconnect the power supply to the intercom system.

6. Mode d'emploi

The Urmet 1128/500 outdoor station functions as the primary interface for visitors to initiate communication with the indoor unit. Its operation is straightforward:

• Lancer un appel : A visitor presses the designated call button on the associated push-button panel (e.g., Smyle, Genya, Exigo, 725, 625).
• Communication audio : Once the indoor unit answers the call, two-way audio communication is established through the electronic microphone and speaker of the 1128/500 station.
• Déverrouillage de la porte : If your intercom system includes a door release function, the indoor unit can activate it to grant access.

7. Entretien

To ensure the longevity and optimal performance of your Urmet 1128/500 outdoor intercom station, follow these maintenance guidelines:

• Nettoyage: Nettoyez périodiquement l'extérieur de l'appareil avec un chiffon doux et sec.amp Chiffon. N’utilisez pas de nettoyants abrasifs, de solvants ou de produits chimiques agressifs, car ils pourraient endommager la finition.
• Inspection: Regularly inspect the unit for any signs of physical damage, loose connections, or wear. Address any issues promptly.
• Protection de l'environnement : While designed for outdoor use, consider additional protection from extreme weather conditions if possible, such as a small overhang.

8. Dépannage

If you encounter issues with your Urmet 1128/500 outdoor intercom station, refer to the following common problems and solutions:

• Pas de son / Mauvaise qualité audio :
  • Vérifiez que tous les branchements électriques ne sont pas desserrés ou corrodés.
  • Ensure the microphone and speaker openings are not obstructed.
  • Verify that the indoor unit is functioning correctly.
• Le bouton d'appel ne répond pas :
  • Confirm power is supplied to the intercom system.
  • Check the wiring between the call button and the outdoor station.
  • Inspect the call button for physical damage.
• Fonctionnement intermittent :
  • Inspect all wiring for intermittent shorts or breaks.
  • Assurez-vous que l’alimentation électrique est stable.

Si les problèmes persistent après avoir essayé ces solutions, contactez un support technique qualifié.

9. Spécifications

10. Garantie et assistance

For information regarding warranty coverage, technical support, or spare parts availability, please refer to the documentation provided with your complete intercom system or contact Urmet customer service directly. Keep your purchase receipt as proof of purchase.