Strymon Ola Chorus/Vibrato Instruction Manual

Introduction

The Strymon Ola is a high-performance digital chorus and vibrato effects pedal engineered to deliver lush and organic modulation sounds. It utilizes a proprietary dBucket algorithm to emulate the warmth and sonic complexities characteristic of classic analog chorus and vibrato effects. Designed for versatility, the Ola features true bypass switching, a convenient favorite preset function, and stereo input/output capabilities, making it a robust tool for musicians seeking high-quality modulation.

Image: The Strymon Ola Chorus/Vibrato pedal, showcasing son bleu casing, control knobs, and footswitches.

Consignes de sécurité

• Always use a compatible 9 Volts DC, center-negative power supply with a minimum current rating of 30 Milliamps. Using an incorrect power supply can damage the unit and void the warranty.
• Do not expose the pedal to moisture, rain, or extreme temperatures.
• Évitez de laisser tomber l'appareil ou de le soumettre à des chocs violents.
• Do not attempt to open the pedal enclosure or modify its internal components. Refer all servicing to qualified personnel.
• Refer to local regulations for proper disposal of electronic waste.

Contenu du colis

The Strymon Ola Chorus/Vibrato pedal is included. Please note that a 9V DC power supply and audio cables are typically sold separately unless specified by your retailer.

Commandes et connexions

The Ola pedal features a user-friendly interface with several control knobs and footswitches for precise sound shaping and effect engagement.

Boutons de contrôle :

• Vitesse: Adjusts the rate of the modulation effect.
• Profondeur: Controls the intensity or sweep range of the modulation.
• Mélanger: Blends the wet (effected) signal with the dry (unaffected) signal.
• Taper: Selects between different chorus and vibrato modes or algorithms.

Commutateurs au pied :

• By-pass: Engages or disengages the effect. The Ola features true bypass, ensuring your dry signal remains unaffected when the pedal is off.
• Préféré: Recalls a saved preset setting.

Relations:

• Entrée (ENTRÉE) : 1/4-inch mono audio input for your instrument.
• Output (OUT L/R): Dual 1/4-inch audio outputs for stereo operation. Use OUT L for mono output.
• Puissance d'entrée : 9V DC, center-negative power jack.

Installation

1. Connexion électrique : Connect a compatible 9V DC, center-negative power supply (minimum 30mA) to the power input jack on the pedal.
2. Connexion de l'instrument : Connectez votre instrument (par exemple, une guitare) au IN jack of the Ola pedal using a standard 1/4-inch instrument cable.
3. Amplifier/Effects Connection:
   • Pour mono operation, connectez le SORTIE L prise à votre amplifier or the next pedal in your signal chain using a 1/4-inch instrument cable.
   • Pour stereo operation, connectez le SORTIE L et SORTIE R jacks to two separate amplifiers or stereo inputs of another effects unit using two 1/4-inch instrument cables.
4. Mise sous tension : Assurez-vous que toutes les connexions sont sécurisées avant de mettre sous tension votre amplifier and the Ola pedal.

Opérationnel

Engager l'effet :

Appuyez sur le By-pass footswitch to engage or disengage the chorus/vibrato effect. The LED indicator will illuminate when the effect is active.

Réglage des paramètres :

Utilisez le Vitesse, Profondeur, Mélanger, et Taper knobs to sculpt your desired modulation sound. Experiment with different combinations to explore the full range of chorus and vibrato effects offered by the dBucket algorithm.

Using the Favorite Preset:

• Enregistrement d'un préréglage : Adjust the control knobs to your preferred settings. Press and hold the Préféré footswitch until its LED blinks, indicating the preset has been saved.
• Rappel d'un préréglage : Appuyez sur le Préféré footswitch to instantly recall your saved settings. The LED will illuminate to confirm the preset is active.

Entretien

• Nettoyage: Clean the exterior of the pedal with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials.
• Connexions de câble : Periodically inspect all audio and power cable connections for signs of wear or damage. Replace faulty cables immediately.
• Stockage: When not in use, store the pedal in a dry, temperate environment, away from direct sunlight and extreme temperatures.

Dépannage

• Pas de son :
  • Vérifiez que tous les câbles audio sont correctement connectés aux prises d'entrée et de sortie appropriées.
  • Vérifiez que l'alimentation est correctement connectée et fournit la tension spécifiée.tage et actuel.
  • Check that your instrument and amplifier are functioning properly.
  • Vérifiez que la pédale est bien enclenchée (la LED de dérivation est allumée).
• Unexpected Noise or Hum:
  • Assurez-vous que tous les équipements soient correctement mis à la terre.
  • Try a different power supply to rule out power-related noise.
  • Test with different audio cables to check for faulty connections.
• Pédale ne répondant pas :
  • Disconnect and reconnect the power supply to perform a soft reset.
  • If issues persist, consult the Strymon support website.
• Cannot Switch Between Multiple Presets: The Strymon Ola pedal is designed to save and recall a single 'Favorite' preset. It does not offer multiple preset banks or instant switching between numerous distinct settings beyond the engaged/bypassed state and the single saved preset.

Caractéristiques

Garantie et assistance

For detailed warranty information, technical assistance, and product support, please visit the official Strymon webIl est recommandé de conserver votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.