Manuel d'utilisation de la passerelle VoIP AudioCodes MediaPack MP-118

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the AudioCodes MediaPack MP-118 Analog VoIP Gateway. The MP-118 is designed to connect traditional analog devices and PSTN/ISDN networks to VoIP services, supporting 4 FXS and 4 FXO analog lines.

Produit terminéview

Figure 1 : Face avant view of the AudioCodes MediaPack MP-118 VoIP Gateway. The front panel features status LEDs for channels, uplink, and power.

The AudioCodes MediaPack MP-118 is a robust analog VoIP gateway, facilitating the integration of legacy telephony equipment with modern IP communication systems. It includes 4 FXS ports for connecting analog phones or fax machines and 4 FXO ports for connecting to PSTN lines or PBX extensions. The device operates on a single 100/10 BaseT Ethernet connection and is powered by an AC power supply.

Configuration et installation

Contenu du colis

• AudioCodes MediaPack MP-118 VoIP Gateway
• Adaptateur secteur
• Câble Ethernet
• Guide de démarrage rapide (le cas échéant)

Connexion de la passerelle

1. Connexion électrique : Connect the provided AC power adapter to the gateway's power input and then to a standard electrical outlet.
2. Connexion réseau: Connect an Ethernet cable from the gateway's 100/10 BaseT port to your network switch or router.
3. FXS Port Connection: Connect analog phones, fax machines, or other FXS-compatible devices to the FXS ports (typically labeled 1-4).
4. FXO Port Connection: Connect PSTN lines or PBX extensions to the FXO ports (typically labeled 5-8).

Configuration initiale

Upon initial power-up, the gateway will perform a self-test. Refer to the Opérationnel section for details on LED indicators. Network configuration and SIP registration typically require access to the device's web-based management interface or command-line interface. Consult the full administration guide for detailed configuration steps, including IP address assignment, SIP server registration, and dial plan setup.

Fonctionnement de la passerelle

Indicateurs LED

The front panel of the MP-118 features several LED indicators to provide status information:

• Voyant d'alimentation : Indicates power status. Solid green typically means the device is powered on and operating correctly.
• LED Prêt : Indicates system readiness. Solid green when the gateway is fully initialized and ready for operation.
• Uplink LED: Indicates Ethernet link status. Blinking or solid green indicates network activity.
• Channel Status LEDs (1-8): Each LED corresponds to an FXS or FXO port.
• Désactivé: Port is idle or not connected.
• Vert uni : Port is active (e.g., phone off-hook, call in progress).
• Vert clignotant : May indicate a specific status like ringing or a configuration issue, depending on firmware.

Basic Call Operations

Once configured, analog devices connected to the FXS ports can make and receive calls via the VoIP network. FXO ports allow calls to be routed between the VoIP network and the PSTN. The gateway supports basic conference call capabilities and multi-line operation, depending on the connected devices and SIP server configuration.

Entretien

• Mises à jour du micrologiciel : Periodically check the AudioCodes support website for firmware updates. Keeping the firmware current ensures optimal performance and security.
• Nettoyage: Clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are clear of dust.
• Conditions environnementales : Ensure the gateway is operated within recommended temperature and humidity ranges to prevent damage. Avoid direct sunlight and excessive heat.
• Configuration de sauvegarde : Regularly back up the gateway's configuration settings to prevent data loss in case of a reset or failure.

Dépannage

Caractéristiques

Informations sur la garantie

AudioCodes products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official AudioCodes webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Assistance clientèle

For technical assistance, advanced configuration guides, or further support, please visit the official AudioCodes support portal or contact their customer service department. You may find additional resources, FAQs, and software downloads on their website.

• AudioCodes Official Website: www.audiocodes.com
• Portail d'assistance: Référez-vous à l'officiel website for the latest support contact information and resources.