ITNS-500 The Ultimate Film and Negative Scanner

1. Introduction

The innovative Technology ITNS-500 is designed to convert various physical media, including 35mm film negatives, slides, photos, and business cards, into digital JPEG format. This device features a 5-megapixel image sensor and a convenient front-loading tray, making it ideal for archiving personal collections such as photographs, baseball cards, stamps, and business cards.

Remarque importante : The ITNS-500 is not compatible with Mac computers and is not supported on Windows operating systems beyond Windows 7.

2. Consignes de sécurité

• Always handle the scanner with care to prevent damage.
• N'exposez pas l'appareil à l'humidité ou à des températures extrêmes.
• Use only the provided USB cable and software.
• Tenir hors de portée des enfants.
• Disconnect the power before cleaning or if the device will not be used for an extended period.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• ITNS-500 Film and Negative Scanner Unit
• Câble USB
• CD du logiciel (ou instructions de téléchargement)
• Film Negative Holder
• Porte-diapositives
• Photo/Business Card Tray
• Manuel de l'utilisateur (ce document)

4. Guide de configuration

4.1 Connexion du scanner

1. Place the ITNS-500 scanner on a stable, flat surface.
2. Connect one end of the provided USB cable to the USB port on the scanner.
3. Connectez l’autre extrémité du câble USB à un port USB disponible sur votre ordinateur.
4. Ensure the scanner's power indicator light illuminates, indicating it is receiving power.

4.2 Installation du logiciel

The ITNS-500 requires specific software for operation. Please follow these steps carefully:

1. Insert the software CD into your computer's CD/DVD drive. If no CD drive is available, refer to the manufacturer's website pour les instructions de téléchargement du logiciel.
2. Follow the on-screen prompts to install the scanning software.
3. Une fois l'installation terminée, redémarrez votre ordinateur si vous y êtes invité.
4. Launch the scanning software. The software should detect the connected ITNS-500 scanner.

Compatibility Warning: This scanner and its software are designed for Windows operating systems up to Windows 7. It is not compatible with Windows 8, 10, 11, or any Mac operating systems.

5. Mode d'emploi

The ITNS-500 allows for scanning of various media types. Ensure the correct holder or tray is used for each type.

Figure 5.1 : Surview of the ITNS-500 scanner in operation, showing its connectivity to a laptop and its capability to scan film negatives, slides, and physical photos.

5.1 Numérisation des négatifs de films 35 mm

1. Open the film negative holder.
2. Carefully place your 35mm film negative strips into the designated slots within the holder, ensuring the correct orientation.
3. Fermez bien le support.
4. Insert the loaded film negative holder into the side slot of the ITNS-500 scanner.
5. In the scanning software, select the "Negative Film" option.
6. Préview the image and adjust settings (e.g., brightness, contrast) as needed.
7. Click the "Scan" button to begin the digitization process.
8. Save the scanned image to your desired location on your computer.

5.2 Scanning Slides

1. Ouvrez le porte-diapositive.
2. Place your mounted slides into the designated slots within the holder.
3. Fermez bien le support.
4. Insert the loaded slide holder into the side slot of the ITNS-500 scanner.
5. In the scanning software, select the "Slide" option.
6. Préview the image and adjust settings as needed.
7. Click the "Scan" button.
8. Save the scanned image.

5.3 Numérisation de photos et de cartes de visite

1. Place the photo or business card onto the front-loading tray. Ensure it is flat and properly aligned.
2. Gently push the tray into the front slot of the ITNS-500 scanner.
3. In the scanning software, select the "Photo" or "Business Card" option.
4. Préview the image and adjust settings as needed.
5. Click the "Scan" button.
6. Save the scanned image.

6. Entretien

6.1 Nettoyage du scanner

• Ensure the scanner is disconnected from the computer before cleaning.
• Utilisez un chiffon doux, sec et non pelucheux pour essuyer l'extérieur du scanner.
• For the scanning glass or lens, use a specialized lens cleaning cloth and solution to avoid scratches. Do not spray liquid directly onto the scanner.
• Regularly remove dust and debris from the film and slide holders.

7. Dépannage

8. Spécifications

• Modèle: ITNS-500
• Capteur d'image : 5 mégapixel
• Types de supports: 35mm Film Negatives, Slides, Photos, Business Cards
• Connectivité : USB
• Dimensions du produit : 5.61 x 7.55 x 8 pouces
• Poids de l'article : 1.68 livres
• Configuration minimale requise : Windows 7 (or earlier)
• Fabricant: Technologie innovante
• Code à barres : 893811002543

9. Informations sur la garantie

This product comes with a limited manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Innovative Technology webConsultez le site pour connaître les conditions générales détaillées. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

10. Assistance clientèle

For technical assistance, troubleshooting, or inquiries regarding your ITNS-500 scanner, please contact Innovative Technology customer support. Contact information can typically be found on the manufacturer's website ou sur l'emballage du produit.