1. Produit terminéview
The Bose CineMate Series II Digital Home Theater Speaker System is designed to enhance your HDTV audio experience with dramatic sound. This 2.1-channel system features compact speakers and a hideaway Acoustimass module, utilizing proprietary TrueSpace technology for a spacious soundstage.
Figure 1 : Plusview of the Bose CineMate Series II system components.
Caractéristiques principales :
- 2.1-channel home theater speaker system with redesigned Articulated Array speakers.
- Improved digital acoustic performance for enhanced audio.
- Specifically designed for seamless integration with your television.
- Sleek, four-button remote control for convenient system operation.
- Simplified setup process requiring only a few connections.
2. Contenu de la boîte
Vérifiez que tous les composants sont présents avant de procéder à l'installation :
- Module acoustique
- 2 Articulated Array speakers
- Module d'interface
- Four-button remote control
- Power cord (8')
- Stereo cable (6')
- Speaker cable (15')
- Optical cable (6')
- Setup DVD
- Mode d'emploi
3. Instructions de configuration
The CineMate Series II system is designed for easy installation. Follow these steps to connect your system:
- Positionnez le module Acoustimass : Place the Acoustimass module in a discreet location, such as behind a curtain or chair. Ensure it is near a power outlet.
- Connectez les haut-parleurs : Connect the two Articulated Array speakers to the Acoustimass module using the provided speaker cables.
- Connect the Interface Module: The interface module houses the audio input from your TV. Connect the interface module to your TV using either the optical cable or the stereo cable, depending on your TV's available outputs.
- Connexion électrique : Branchez le cordon d'alimentation du module Acoustimass à une prise murale.
- Configuration de la télécommande : Insert batteries into the four-button remote control.
Figure 2: Rear connections of the Acoustimass module and the interface module.
For detailed visual guidance, refer to the included Setup DVD.
Figure 3 : Example of the CineMate Series II system integrated into a living room.
4. Fonctionnement du système
The CineMate Series II system is operated using its simplified four-button remote control.
Figure 4: The simplified four-button remote control.
- Pouvoir: Appuyez sur le bouton d'alimentation pour allumer ou éteindre le système.
- Volume: Use the volume up (+) and volume down (-) buttons to adjust the sound level.
- Muet: Press the mute button to temporarily silence the audio. Press again to restore sound.
The interface module will display on/off status for your speaker system.
5. Entretien
To ensure optimal performance and longevity of your Bose CineMate Series II system, follow these maintenance guidelines:
- Nettoyage: Use a soft, dry cloth to clean the surfaces of the speakers, Acoustimass module, and interface module. Avoid using liquid cleaners or solvents.
- Ventilation: Ensure that the Acoustimass module has adequate ventilation. Do not block any vents.
- Gestion des câbles: Vérifiez régulièrement toutes les connexions des câbles pour vous assurer qu'elles sont bien fixées.
- Conditions environnementales : Évitez d'exposer le système à des températures extrêmes, à l'humidité ou à la lumière directe du soleil.
6. Dépannage
If you encounter issues with your CineMate Series II system, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de son | Power cord disconnected, incorrect audio input, system muted. | Check power connections. Verify audio cable connection to TV and interface module. Ensure system is not muted. |
| Mauvaise qualité sonore | Loose speaker cables, incorrect speaker placement, audio source issue. | Secure speaker cables. Adjust speaker placement for optimal sound. Test with a different audio source. |
| La télécommande ne fonctionne pas | Dead batteries, obstructed signal, remote out of range. | Replace remote batteries. Ensure clear line of sight to interface module. Move closer to the system. |
For further assistance, consult the full owner's manual or contact Bose customer support.
7. Spécifications
- Nom du modèle : CineMate Series II
- Type de haut-parleur : Satellite
- Configuration du canal de son surround : 2.1
- Couleur: Noir
- Product Dimensions (CineMate II speaker arrays): 3.3 x 7.8 x 5.1 pouces
- Product Dimensions (Acoustimass Module): 14.5 x 8.8 x 19.1 pouces
- Product Dimensions (Interface module): 2.38 x 5.5 x 2.63 pouces
- Poids de l'article : 34.25 Pounds (total shipping weight)
- Appareils compatibles : TVs: standard and high-definition
- Méthode de contrôle : Télécommande
- Source d'alimentation : Électrique avec fil
8. Garantie et assistance
The Bose CineMate Series II Digital Home Theater Speaker System comes with a Garantie limitée. Please refer to the official owner's manual included in your package for complete warranty details, terms, and conditions.
For product support, technical assistance, or warranty claims, please visit the official Bose webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat et le numéro de série du produit pour un traitement plus rapide.
9. Vidéo produitview
Regardez cette vidéo pour un bref aperçu.view of the Bose speaker system and its features.
Vidéo : Un utilisateur review highlighting the features and sound quality of a Bose speaker system.