KING 4K1210BW K Series Baseboard Heater User Manual

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your KING 4K1210BW K Series Baseboard Heater. This 4-foot, 1000-watt, 120-volt electric baseboard heater is designed to provide natural convection heat for indoor spaces. Please read all instructions carefully before installation and use.

Image 1.1: The KING 4K1210BW K Series Baseboard Heater in Bright White.

2. Informations importantes sur la sécurité

AVERTISSEMENT : Risque d'incendie, d'électrocution ou de blessures corporelles.

• This heater is designed for permanent installation and must be hard-wired by a qualified electrician in accordance with all local and national electrical codes. It is not a plug-in model.
• Do not install the heater near combustible materials. Maintain proper clearances from walls, furniture, drapes, and other objects as specified in the installation instructions.
• N'insérez pas et ne laissez pas d'objets étrangers pénétrer dans les ouvertures de ventilation ou d'évacuation, car cela pourrait provoquer un choc électrique ou un incendie, ou endommager le radiateur.
• Pour éviter tout risque d'incendie, ne bloquez en aucune façon les entrées ou sorties d'air. Ne pas utiliser sur des surfaces molles, comme un lit, où les ouvertures pourraient être obstruées.
• Always disconnect power at the main service panel before performing any service or maintenance on the heater.
• Ce radiateur est chaud lorsqu'il est utilisé. Pour éviter les brûlures, ne laissez pas la peau nue toucher les surfaces chaudes.
• N’utilisez pas cet appareil de chauffage dans les salles de bains, les buanderies ou tout autre endroit intérieur similaire où il y a de l’eau.

3. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• KING 4K1210BW K Series Baseboard Heater (1 unit)
• Manuel d'installation et d'utilisation (ce document)
• Matériel de montage (vis, chevilles)

4. Configuration et installation

Installation of this baseboard heater requires electrical wiring and should only be performed by a qualified electrician or licensed professional in compliance with all national and local electrical codes.

4.1 Emplacement de montage

Select a wall location that allows for proper air circulation and maintains required clearances. Ensure the heater is mounted securely to wall studs or with appropriate anchors. The unit features perforations along the back for easy mounting.

4.2 Connexion électrique

The KING 4K1210BW is a 1000W, 120V unit designed for hard-wiring. Connect the heater directly to a dedicated 120V circuit. Refer to the wiring diagram provided within the heater's junction box for specific connections. Ensure all connections are secure and insulated. If connecting to a thermostat, follow the thermostat's wiring instructions in conjunction with the heater's diagram. Note that some models may have all black wires; in such cases, refer to the diagram for proper identification of line and load connections.

Image 4.1 : Interne view illustrating the crushproof element design with aluminum ribbon finning and coiled nichrome wire.

5. Mode d'emploi

Once properly installed and wired, the baseboard heater operates via natural convection. Heat is generated by the internal element and rises, circulating warmth throughout the room.

5.1 Initial Operation and Odor

Upon first use, or after extended periods of non-use, the heater may emit a slight odor and some smoke for approximately 30-45 minutes. This is normal and is due to the burn-off of manufacturing residues. Ensure the area is well-ventilated during this initial period. The odor will dissipate completely with continued use.

5.2 Contrôle de la température

The heater's temperature is controlled by an external thermostat (sold separately). Adjust the thermostat to your desired room temperature. The heater will cycle on and off to maintain the set temperature.

6. Entretien

Un entretien régulier garantit des performances optimales et une longue durée de vie à votre appareil de chauffage. Coupez toujours l'alimentation au disjoncteur avant toute intervention.

6.1 Nettoyage

Essuyez périodiquement l'extérieur du radiateur avec un chiffon doux et sec.amp Chiffon. N’utilisez pas de nettoyants abrasifs ni de solvants. Assurez-vous que le radiateur soit complètement sec avant de le remettre sous tension.

6.2 Flux d'air

Ensure that the air intake and exhaust openings are free from dust, lint, or other obstructions. Blocked airflow can reduce heating efficiency and pose a fire hazard.

7. Dépannage

If your heater is not operating correctly, consult the following table before contacting customer support.

8. Spécifications

9. Garantie et assistance

9.1 Garantie limitée

This KING 4K1210BW K Series Baseboard Heater comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the manufacturer's website.

9.2 Assistance clientèle

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact KING customer support. Contact information can typically be found on the manufacturer's website ou sur l'emballage du produit.

10. Vidéo produit