FPG Inline 3000 Series Bain Marie 1200 In-counter Square Heated
Product Information
Specifications
- Model: Inline 3000 Series Bain Marie IN-3B12-SQ-FF-IC
- Installation: In-counter, Square/Fixed Front
- Height: 771mm
- Width: 1200mm
- Depth: 662mm
- Heating: Low wattage density element / 2x 100-watt linear halogen
- Voltage: 220-240 V Single
- Phase: 1
- Current: 7.8 A
- Capacity: Display area 0.45 m2, 3 x 1/1 pans
Product Usage Instructions
Installation
Ensure the benchtop cutout dimensions are 1178 x 650mm as per the product manual for the IN-3B12-SQ-FF-IC model.
Heating and Electrical Data
The Bain-marie uses a low-wattage density element along with 2x 100-watt linear halogen lamps for heating. The electrical data specifies a voltage of 220-240 V Single phase with a current of 7.8 A.
Capacity and Construction
- The display area is 0.45 m2 and can accommodate 3 x 1/1 pans.
- The chassis construction includes stainless steel 304 and mild steel components.
Maintenance and Cleaning
- Regularly clean the bain marie using mild detergent and water.
- Ensure all parts are dry before use.
Frequently Asked Questions
- Q: Can the bain marie be used for cold food display?
- A: No, this model is designed for heated food display only.
- Q: What should I do if the unit is not heating properly?
- A: Check the power supply and ensure all heating elements are functioning correctly. If issues persist, contact customer support.
- Q: Can the sliding doors be removed for cleaning?
- A: Yes, the sliding doors are designed to be easily removed for cleaning purposes.
Specifications
| RANGE | INLINE 3000 SERIES BAIN MARIE |
| TEMPERATURE | HEATED |
| MODEL | IN-3B12-SQ-FF-IC |
| FRONT | SQUARE/FIXED FRONT |
| INSTALLATION | IN-COUNTER |
| HEIGHT | 771mm |
| WIDTH | 1200mm |
| DEPTH | 662mm |
| TEMPERATURE RANGE | +30°C – +110°C |
| RECOMMENDED CORE PRODUCT TEMPERATURE | +65°C – +80°C |
| ENVIRONMENTAL TEST CONDITIONS | 22˚C / 65% RH |
FEATURES
- High energy efficiency: 1.2 kWh per hour (average)
- Cabinet operating temperature range +30°C – +110°C
- Recommended core product temperature +65°C – +80°C
- Smart display with double-glazed glass finished with a black trim
Fixed Front Heated Display
- Fitted with halogen heat lamps, with 3000-hour warm white lighting
- Supplied with 3x 1/1 gastronorm dishes 65mm deep
Operational Excellence
- Sliding doors (staff side) and fixed front (customer side)
- Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control and durability
- Low wattage density element provides even temperature distribution
- Dry operation will only
- Designed to be installed into joinery
OPTIONS & ACCESSORIES
- Contact an FPG Sales Representative for our full range, including.
- Add a holding shelf
- Branded decals
- Rear door or end glass mirror application
- GN pans (various sizes)
- GN dividers
- Forward-facing controls
- Custom joinery solution
- Please contact FPG to discuss your requirements for meeting country-specific standards.
HEATED DATA
| MODEL | TEMPERATURE RANGE | RECOMMENDED CORE PRODUCT TEMPERATURE | ENVIRONMENTAL TEST CONDITIONS | HEATING |
| IN-3B12-SQ-FF-IC | +30°C – +110°C | +65°C – +80°C | 22˚C / 65% RH | Low wattage density element / 2x 100-watt linear halogen |
ELECTRICAL DATA
| MODEL | VOLTAGE | PHASE | CURRENT | E24H (kWh) | kWh per hour (average) | IP RATING | MAINS | HEAT LAMPS | HALOGEN LIGHTING | ||
| CONNECTION | CONNECTION PLUG1 | HOURS | COLOUR | ||||||||
| IN-3B12-SQ-FF-IC | 220-240 V | Single | 7.8 A | 28.8 | 1.2 | IP 22 | 3 metre, 3 core cable | 10 amp, 3 pin plug | 2x 100-watt linear halogen | 3000 | Warm white |
- Please advise the country to change the plug specification.
CAPACITY, ACCESS & CONSTRUCTION
| MODEL | DISPLAY AREA | NO. OF 1/1 PANS | ACCESS FRONT | ACCESS REAR | CHASSIS CONSTRUCTION |
| IN-3B12-SQ-FF-IC | 0.45 m2 | 3 | Fixed front | Sliding doors | Stainless 304 and mild steel |
DIMENSIONS
| MODEL | H x W x D mm (Uncrated) | MASS (Uncrated) |
| IN-3B12-SQ-FF-IC | 771 x 900 x 662 | – kg |
- Crated weights and dimensions vary. Please contact us for information on your shipment.
Installation note;
- Model cutout dimensions: IN-3B12-SQ-FF-IC models require an 1178 x 650mm benchtop cutout (see product manual for installation guide).
More information
- More information including technical data and installation guidelines is available from the Product Manual published on our website.
- In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice.
- Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.
- 11/24 © 2024 Future Products Group Limited.
- Worldwide contact details:
- FPGWORLD.COM
Documents / Resources
 | FPG Inline 3000 Series Bain Marie 1200 In-counter Square Heated [pdf] Owner's Manual IN-3B12-SQ-FF-IC, IN-3B12-SQ-IC, Inline 3000 Series Bain Marie 1200 In-counter Square Heated, Inline 3000 Series, Bain Marie 1200 In-counter Square Heated, In-counter Square Heated, Square Heated |