FOSSiBOT F110L Smart Phone User Manual

F110L Smart Phone

Specifications:

  • Model: XYZ-2000
  • Dimensions: 10 x 5 x 3 inches
  • Weight: 2 pounds
  • Power: 120V AC
  • Capacity: 1 liter

Product Information:

The XYZ-2000 is a versatile and compact device designed to
efficiently perform a variety of tasks in your daily routine. With
its lightweight design and powerful motor, it can handle blending,
chopping, and pureeing with ease. The 1-liter capacity allows you
to prepare large batches of smoothies, sauces, and soups in one go.
The sleek design and user-friendly interface make it a perfect
addition to any kitchen.

Usage Instructions:

1. Assembly:

Before using the XYZ-2000, ensure all parts are clean and dry.
Assemble the blending jar onto the base by aligning the arrows and
twisting it clockwise until it locks into place securely.

2. Operation:

Plug in the device and press the power button to start. Select
the desired speed setting for blending or chopping. Use the pulse
function for quick bursts of power. Do not operate the device
continuously for more than 1 minute at a time to prevent
overheating.

3. Cleaning:

Unplug the device before cleaning. Remove the blending jar from
the base and disassemble all removable parts. Wash them with warm,
soapy water and rinse thoroughly. The blending jar and lid are also
dishwasher safe for added convenience.

FAQ:

Q: Can I blend hot liquids in the XYZ-2000?

A: It is not recommended to blend hot liquids in the XYZ-2000 to
avoid pressure build-up and potential splattering. Allow hot
liquids to cool before blending.

Q: How do I troubleshoot if the device stops working
suddenly?

A: Check if the power cord is securely plugged in and the power
outlet is functioning. Ensure that the blending jar is properly
assembled onto the base and the lid is securely closed. If the
issue persists, contact customer support for assistance.

FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
FCC/IC RF Radiation Exposure and SAR Statements The Smart Phone F110L has been tested for body-worn Specific Absorption Rate(SAR) compliance. The FCC/IC has established detailed SAR requirements and has established that these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to be compliant to RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body (5mm) is 1.048 W/kg, Body Simultaneous transmission is 1.471W/kg at the same time.SAR level for usage near the Head is 0.802 W/kg and Head simultaneous transmission is 1.351 W/kg. SAR level for usage near the Hotspot(10mm) is 0.929 W/kg and Hotspot(10mm) simultaneous transmission is 0.929 W/kg

Documents / Resources

FOSSiBOT F110L Smart Phone [pdf] User Manual
2BAK2-F110L, 2BAK2F110L, f110l, F110L Smart Phone, F110L, Smart Phone, Phone

References

Leave a comment

Your email address will not be published. Required fields are marked *