FBS-10F-WiFi-x Forti BranchSASE Access Point
Specifications
- FBS-10F-WiFi
- FBS-20G
- FBS-20G-WiFi
- FEX-200F
Product Information
The FortiBranchSASE (FBS) series is purpose-built to provide
security and connectivity for small remote sites where local
security services are unlikely to be present. It helps streamline
deployment by using FBS devices, eliminating the complexity of
managing a local security stack at each remote branch.
Ordering Information
Various models are available with different specifications such
as WAN/LAN ports, PoE support, USB ports, BLE, SFP+1G RJ45 Combo
ports, power supply details, and modem/WiFi capabilities.
Product Usage Instructions
Deployment Scenarios
FortiBranchSASE units are ideal for small remote sites,
micro-branches, home offices, and temporary setups.
Compatibility
While FortiBranchSASE naturally fits with FortiSASE for thin
edge deployments, it can also operate with any FortiOS based
management solution like a remote FortiGate appliance or FortiGate
VM.
Licenses
When using FortiBranchSASE units with FortiSASE, a FortiSASE
device subscription is required. Select the appropriate FortiSASE
subscription bundle SKU with the FBS hardware.
Scalability
FortiBranchSASE handles scalability well. Check for current
updates on the number of devices supported in LAN-Extension mode
with FortiGate.
Frequently Asked Questions
Do FEX-200F and FBS devices provide LTE/5G WAN
connectivity?
No, they are Ethernet-only products in the FortiExtender line.
They support Ethernet connectivity for cost-effective
deployment.
What is the Thin Edge concept?
Thin edge refers to a minimalistic approach focusing on
centralized security and control for small sites requiring minimal
hardware.
Does the FBS product line require FortiSASE to operate?
No, while it naturally fits with FortiSASE, it can operate with
any FortiOS based management solution.
What licenses do I need to use FortiBranchSASE?
A FortiSASE device subscription is required when using
FortiBranchSASE with FortiSASE. Select the appropriate bundle
SKU.
What types of use cases are ideal for FortiBranch SASE?
FBS devices are suitable for various use cases including small
remote sites, micro-branches, and home offices.
ORDERING GUIDE
FortiBranchSASE
The FortiBranchSASE (FBS) series is purpose-built to provide security and connectivity, intended to be used for small remote sites where local security services are unlikely to be present. In some use cases, customers can streamline deployment by opting to use FBS devices, eliminating the complexity of managing a local security stack at each remote branch.
FBS devices offer fast and versatile connectivity via fiber or copper and establish an IPsec tunnel to the nearest FortiSASE instance for data inspection. FBS devices enable remote management through the FortiSASE portal and deliver security services via SASE cloud or a FortiOS-based solution, such as a remote FortiGate or a cloud-based virtual FortiGate. All traffic generated behind FBS is secured by applying data protection measures at FortiSASE POP or the remote FortiOS instance, ensuring that small remote sites receive robust security and protection. Ordering is simple, select the Hardware FBS device and FortiSASE subscription bundle.
Note: FEX-200F does not have a FortiSASE bundle, please select 595 and 247 which is equivalent to bundle.
ORDER INFORMATION
Hardware Specifications Dedicated WAN Ports LAN/Switch Ports Power over Ethernet (PoE) Powered Power Required Console Port USB Ports Bluetooth Connectivity 4G-LTE/5G Modems Wi-Fi (Built-in AP) FortiGate LAN Extension Support Bandwidth Information IPsec Throughput Lan-Extension Throughput LAN-WAN, Layer-3 Throughput Hardware Model Global (Select the correct region code for Wi-Fi models) FortiSASE Managed FortiSASE Subscription Bundle 25Mbps Add-on (Account Level) Optional FortiSASE Subscription (A-la-carte) FortiCare Premium Support (A-la-carte) FortiGate Managed FortiCare Premium Support FortiEdge Cloud Managed FortiEdge Management + FortiCare Premium
10F-WIFI
ALL THIN-EDGE MODELS
20G
20G-WIFI
200F
1x 1G RJ45 WAN 2x 1G RJ45 WAN/LAN
Yes PoE 802.3at (25.5W)
1x RJ45 USB2.0 – A
BLE
1x SFP+1G RJ45 (Combo) 3x 1G LAN, 1x 1G WAN/LAN
No 12V/2A (24W)
1x RJ45 USB2.0 – A 2.4G BLE
1x SFP+1G RJ45 (Combo) 3x 1G LAN, 1x 1G WAN/LAN
No 12V/2A (24W)
1x RJ45 USB2.0 – A 2.4G BLE
1x 1G RJ45 WAN 3x 1G LAN, 1x 1G WAN/LAN
No 12V/2A (24W)
1x RJ45 USB2.0 – A
BLE
No Modem WiFi6 Yes
No Modem No Yes
No Modem WiFi6 Yes
No Modem No Yes
890Mbps 860Mbps 900Mbps
890Mbps DL/UL: 600Mbps/350Mbps
900Mbps
890Mbps DL/UL: 600Mbps/350Mbps
900Mbps
220Mbps 180Mbps 900Mbps
FBS-10F-WiFi-x
FBS-20G
FBS-20G-WiFi-x
FEX-200F
FC-10-BS10F-1070-02-DD FC1-10-FSASE-471-01-DD
–
FC-10-BS20G-1070-02-DD FC1-10-FSASE-471-01-DD
–
FC-10-BS20W-1070-02-DD FC1-10-FSASE-471-01-DD
–
N/A FC1-10-FSASE-471-01-DD FC-10-X200F-595-02-DD FC-10-X200F-247-02-DD
FC-10-BS10F-247-02-DD
FC-10-BS20G-247-02-DD
FC-10-BS20W-247-02-DD
FC-10-X200F-247-02-DD
TBD
TBD
TBD
TBD
1
ORDERING GUIDE | FortiBranchSASE
FREQUENTLY ASKED QUESTIONS
Do FEX-200F and FBS devices provide LTE/5G WAN connectivity?
No. Thin Edge devices are Ethernet-only products in the FortiExtender line, supporting a cost-effective means of rolling out Thin Edge devices via Ethernet, if LTE is not desired and internet connectivity is present at the branch locations for FortiSASE service.
What is the “Thin Edge” concept?
Thin edge refers to a minimalistic approach to deployments where limited on-site equipment is used, focusing on centralized security and control. It’s designed for small sites like micro-branches, home offices, and temporary setups that require connectivity with minimal hardware.
What is “LAN-Extension” Technology with FortiGate?
The FortiGate LAN extension allows you to seamlessly connect FortiExtenders and FBS devices into a remote FortiGate at an HQ or centralized location via VxLAN over IPSec. LAN-Extension technology allows FortiGate to extend its local LAN to a remote location using FEX or FBS devices, and hosts connecting behind FBS logically appear as FortiGate’s internal LAN and managed from FortiGate. FBS Thin-Edge devices also use LAN-Extension technology to connect to the FortiSASE PoP, from where FBS devices are provisioned and managed, thus, connecting hosts behind FBS appliance receive security from FortiSASE cloud.
Does the FBS product line require FortiSASE to operate?
No, while FortiBranchSASE naturally fits with our FortiSASE solution for thin edge deployments, it can also operate with any FortiOS based management solution, such as a remote FortiGate appliance, a FortiGate VM, or FortiGateas-a-Service.
What licenses do I need to use FortiBranchSASE? When using FortiBranchSASE units with FortiSASE, a FortiSASE device subscription is required. Select the FortiSASE subscription bundle SKU with appropriate FBS Hardware, apart from 200F which does not have bundle SKU, select a-la-carte SKUs for 200F.
What types of use cases are ideal for FortiBranch SASE? FBS devices can be used in various use cases and deployment scenarios but three are highlighted below as an example:
· Micro-branches: small offices needing central management, visibility, and policy consistency without heavy investment.
· Home Offices: For executives or high-priority users with more equipment than a typical laptop, requiring secure, seamless connectivity.
· Temporary Pop-ups: Sites like kiosks or event setups that need rapid deployment and takedown with secure connectivity.
How does FortiBranch SASE handles scalability? Please check current updates for FEX/FBS supported in LAN-Extension mode with FortiGate, it varies between 16 to 1024 devices depending on FortiGate model and FortiGate VM.
Visit www.fortinet.com for more details
Copyright © 2024 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s SVP Legal and above, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.
FBS-OG-R01-20241205
Documents / Resources
 | FORTINET FBS-10F-WiFi-x Forti BranchSASE Access Point [pdf] Instructions FBS-10F-WiFi-x, FBS-10F-WiFi-x Forti BranchSASE Access Point, Forti BranchSASE Access Point, BranchSASE Access Point, Access Point |