FORTIN 92551 EVO-ALL Universal All In One Data Bypass and Interface Module User Manual

92551 EVO-ALL Universal All In One Data Bypass and Interface Module

Product Specifications

  • Model: EVO-ALL
  • Compatibility: Volkswagen Atlas 2018 vehicles
  • Manufactured after: 2019
  • Firmware Version: 64.[06] (Minimum)

Product Usage Instructions

Installation Requirements

To ensure proper installation, the following items are
required:

  • Flash Link Updater or Flash Link Mobile tool for firmware
    version and options.
  • RLINK Programming Tool for key bypass programming.
  • Parts not included: TB-VW (key bypass), RLINK programming tool,
    THARNESS THAR-VW6 or THAR-VW2, diodes, fuse, etc.

Programming Bypass Options

For vehicles without a functional hood pin, set function A11 to
OFF. Ensure the hood pin switch is installed for safety.

Installation Notes

It is mandatory to install the hood pin as a safety measure.
Installation must be done by a qualified technician to avoid
permanent vehicle damage.

Additional Tools for Installation

  • Flash Link Updater or Flash Link Mobile for software
    updates
  • Microsoft Windows computer with an internet connection or Flash
    Link Mobile app for programming

Frequently Asked Questions (FAQ)

Q: Is the TB-VW key bypass included in the package?

A: No, the TB-VW key bypass is not included and must be
purchased separately.

Q: What should I do if the red LED on the module flashes three
times?

A: A red LED flashing three times indicates ‘No tach’. Ensure
proper connections and consult a technician if needed.

Q: Can I remote-start the vehicle with the OEM remote?

A: Yes, you can remote-start the vehicle using the OEM remote by
following specific button sequences mentioned in the manual.

“`

ALL

Page 1 / 13

INSTALLATION WITH TB-VW INSTALLATION AVEC TB-VW

REV.: 20250117

Guide # 92551
ADDENDUM – SUGGESTED WIRING CONFIGURATION ADDENDA – SCHÉMA DE BRANCHEMENT SUGGÉRÉ

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. COMPATIBLE AVEC VÉHICULE À TRANSMISSION AUTOMATIQUE SEULEMENT.

Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce diagramme (fonctionnelles si équipé)
AUX.1 Comfort Group Groupe confort

Immobilizer bypass with TB-VW (Sold separately) Contournement d’immobilisateur avec TB-VW (Vendu séparément) **T-Harness available (sold separately) **Harnais en T disponible (vendu séparément) Lock Unlock Arm Disarm Parking Lights Trunk (open) Tachometer Heated seats Heated steering wheel** Rear defrost Door Status Trunk Status Hood Status* Hand-Brake Status Foot-Brake Status OEM Remote monitoring

VEHICLE VEHICULES VOLKSWAGEN Atlas

YEARS ANNÉES
2018

·

·

······· · · · · · · · · ·

MODEL: EVO-ALL DATE:02/2019 FORTIN.CA
SN: 000000 00000
MADE IN CANADA © 2018 ALL RIGHTS RESERVED

COMPATIBLE MODULE

QR CODE ON THE LABEL

REQUIRED:

MANUFACTURED
AFTER: 2019

2019 MODULE
COMPATIBLE

CODE QR SUR L’ÉTIQUETTE

REQUIS: FABRIQUÉ APRÈS:

2019

FIRMWARE VERSION VERSION LOGICIELLE
64.[06] MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately. Pour ajouter la version logicielle et les options,
utilisez l’outil FLASH LINK UPDATER ou FLASH LINK MOBILE, vendu séparément.

R-LINK

PROGRAMMING TOOL REQUIRED for key bypass programming. Sold separately.

OUTIL DE PROGRAMMATION REQUIS pour le contournement de clé. Vendu séparément.

NOTES

Program bypass option: Programmez l’option du contournement:

UNIT OPTION OPTION UNITE
C1

Program bypass option (If equiped with OEM alarm): Programmez l’option du contournement (Si équipé d’une alarme d’origine):
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
SI LE VÉHICULE N’EST PAS ÉQUIPÉ D’UN CONTACT DE CAPOT FONCTIONNEL:

D2

A11

OFF NON

DESCRIPTION
OEM Remote status (Lock/Unlock) monitoring Suivi des status (Verrouillage/Déverrouillage) de la télécommande d’origine
Unlock before / Lock after (Disarm OEM alarm) Déverrouille avant / Verrouille après (Désarme l’alarme d’origine)
Hood trigger (Output Status).
Contact de capot (état de sortie).

Vehicle’s equipped with Virtual Cluster, not supported for the key bypass.

Véhicule équipé d’un odomètre virtuel, non pris en charge pour le contournement de clé.

MANDATORY INSTALL | INSTALLATION OBLIGATOIRE

* HOOD PIN
CONTACT DE CAPOT

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED

IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, A11

OFF NON

SET FUNCTION A11 TO OFF.

STATUT DE CAPOT : LE CONTACT DE CAPOT, DOIT ÊTRE INSTALLÉ SI LE
VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

Notice: l’installation des éléments de sécurité est obligatoire. Le contact de capot est un élément de sécurité essentiel et doit absolument être installé.

CE MODULE DOIT ÊTRE INSTALLÉ PAR UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
PARTS REQUIRED | PIÈCES REQUISES

Page 2 /13

Parts required (Not included)

Pièce(s) requise(s) (Non incluse(s))

WIRE TO WIRE DIAGRAM | SCHÉMA DE BRANCHEMENTS FIL À FIL

PAGE

1x TB-VW (key bypass) AUTOMATIC TRANSMISSION 1x RLINK programming tool
TRANSMISSION AUTOMATIQUE 1x Fusible 4x Diodes

1x TB-VW (contournement de clé) 1x Outil de programmation RLINK 1x Fusible 4x Diodes

page 5

THARNESS DIAGRAM | SCHÉMA DE BRANCHEMENTS HARNAIS EN T

THARNESS THAR-VW6

AUTOMATIC TRANSMISSION TRANSMISSION AUTOMATIQUE

1x TB-VW (key bypass) 1x RLINK programming tool 1x THAR-VW6

1x TB-VW (contournement de clé) 1x Outil de programmation RLINK 1x THAR-VW6

page 7

THARNESS THAR-VW2

AUTOMATIC TRANSMISSION TRANSMISSION AUTOMATIQUE

1x TB-VW (key bypass) 1x RLINK programming tool 1x THAR-VW6

1x TB-VW (contournement de clé) 1x Outil de programmation RLINK 1x THAR-VW6

page 9

TB-VW

Parts required (Not included) 1x TB-VW (key bypass)

Pièce(s) requise(s) (Non incluse(s)) 1x TB-VW (contournement de clé)

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

PARTS REQUIRED (NOT INCLUDED) | PIÈCES REQUISES (NON INCLUSES)

1x FLASH LINK UPDATER,

1x FLASH LINK MANAGER
SOFTWARE | PROGRAMME

1x

Microsoft Windows Computer with Internet connection

Ordinateur Microsoft Windows

avec connection Internet

OR

OU

1x FLASH LINK MOBILE

1x FLASH LINK MOBILE APP

Smartphone AndroId or iOS with Internet

1x

connection (provider charges may apply).

Téléphone Intelligent Android ou iOS

avec connection Internet (frais du

fournisseur Internet peuvent s’appliquer).

MANDATORY | OBLIGATOIRE

HOOD PIN
CONTACT DE CAPOT

REMOTE START SAFETY OVERRIDE SWITCH COMMUTATEUR DE SÉCURITÉ DE DÉSACTIVATION DU DÉMARREUR À DISTANCE
ON VALET SWITCH COMMUTATEUR VALET
OFF

Part #: RSPB available, Sold separately. Pièce #: RSPB disponible, vendu séparément.

Page 3 /13
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed. Notice: l’installation des éléments de sécurité est obligatoire. Le contact de capot et le commutateur de valet sont des éléments de sécurité essentiels et doivent absolument être installés.

STAND ALONE CONFIGURATION | CONFIGURATION EN DÉMARREUR AUTONOME

Program bypass option OEM Remote Stand Alone Remote Starter:
Programmez l’option du contournement Démarreur à distance Autonome avec télécommande d’origine :
Program bypass option with oem remote: Programmez l’option du contournement
avec télécommande d’origine:

UNIT OPTION OPTION UNITE
OOURD1D.11.1U0N D1.1 UN
UNIT OPTION OPTION UNITE
C1

Program bypass option with RF KIT antenna:
Programmez l’option du contournement avec antenne RF:

UNIT OPTION OPTION UNITE
H1 to H6 H1 à H6

DESCRIPTION
BLOy CdKef,aUuNltL, LOOCCKK, ,LLOOCCKK, LOCK
Par défaut, VERROUILLE,VERROUILLE,VERROUILLE
LVOECRKR, OUNULILOLCEK, DLOÉCVKERROUILLE, VVEERRRROOUUILILLEL,EDÉVERROUILLE,VERROUILLE
DESCRIPTION
OEM Remote Monitoring
Supervision de la télécommande d’origine
DESCRIPTION
Supported RF Kits and select RF Kit Kit RF supportés et sélectionnez le KIT RF

REMOTE STARTER FUNCTIONNALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE

All doors must be closed. Toutes les portes doivent
être fermées

Press the OEM remote’s Lock Unlock Lock buttons
to remote-start (or remote-stop) the vehicle.
Appuyez sur les boutons Verrouillage Dérrouillage Verrouillage de la télécommande
d’origine pour démarrer à distance (ou arrêter à distance) le véhicule.

START
The vehicle will START. Le véhicule DÉMARRE.

REMOTE STARTER DIAGNOSTICS

DIAGNOSTIQUE DU DÉMARREUR À DISTANCE

MODULE RED LED | DEL ROUGE DU MODULE

x2 flash : Brake ON Frein Activé

x3 flash : No tach

Pas de Tach

x4 flash : Ignition

Clé de contact

before start détectée avant

démarrage

x5 flash : Hood Open Capot Ouvert

REMOTE STARTER WARNING CARD | CARTE D’AVERTISSEMENT DE DÉMARREUR À DISTANCE
WARNING | ATTENTION

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
COUPEZ CETTE CARTE D’AVERTISSEMENT ET COLLEZ-LA À UN ENDROIT VISIBLE: ou utilisez la trousse RSPB, vendue séparément.

REMOTE STARTER DÉMARREUR À DISTANCE

THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON
ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A
SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE
DASHBOARD BEFORE WORKING ON THE VEHICLE.

LE VÉHICULE PEUT DÉMARRER SOIT: EN APPUYANT 3 FOIS CONSÉCUTIVEMENT SUR
LE BOUTON VERROUILLAGE DE LA TÉLÉCOMMANDE DU VÉHICULE OU PAR UN TÉLÉPHONE INTELLIGENT. ACTIONNEZ EN
POSITION `ON’ LE COMMUTATEUR DE SÉCURITÉ SITUÉ SOUS LE TABLEAU DE BORD
AVANT LES TRAVAUX D’ENTRETIEN.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
Photo & Location | Photos & Emplacements
Under steering column (WITHOUT STEERING HEATED WHEEL) Sous la colonne de direction (SANS VOLANT CHAUFFANT)
(+)IGNITION1 (+)IGNITION2

(+)KEY SENSE

(+)STARTER
(~)CAN HIGH1

(~)CAN LOW1

(~)TRANSPONDER WIRE

Page 4 /13
TRANSPONDER

BCM (+)FOOT BRAKE

OBD-II connector Connecteur OBD-II

(~)CAN HIGH2
6

14

16

(~)CAN (+) 12V LOW2

ATLAS

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 5 /13

WIRE-TO-WIRE AUTOMATIC TRANSMISSION WIRING CONNECTION | FIL À FIL GUIDE DE BRANCHEMENTS TRANSMISSION AUTOMATIQUE

Hood pin only required on vehicles not equipped with a factory hood pin. Commutateur de capot requis seulement si le véhicule n’est pas équipé de cette composante.
SAFETY OVERRIDE SWITCH COMMUTATEUR DE SÉCURITÉ

OPTIONAL RF KIT KIT RF OPTIONNEL
WITH RF-KIT AVEC KIT-RF

Start / Stop external control Contrôle de démarrage/arrêt externe
(-) Lock/Unlock input external control | Contrôle du (-) verrouillage devérrouillage entrée externe

WITHOUT RF-KIT: SANS KIT RF:

RF-KIT REMOTE STARTER
KIT-RF DÉMARREUR À DISTANCE
WITH | AVEC DATA-LINK: Direct connection Branchement directe

RS2 IN (+)12V Battery RS1 Ground | Masse

B4 Red (+)12V Battery B3 Black Ground | Masse
Cut | Coupez Red B4 Cut | Coupez Black B3
Blue B2 White B1

Ground Masse

Ground Masse

(+)Ignition

B
Yellow In AA11

(-) Lock

Purple In AA22

(-) Unlock Purple/White In AA33

Green

White

Orange

Orange/Black

Hood pin

Dk.Blue

Red/Blue

Out AA44 Out AA55
In AA66
A In AA77
In AA88 In AA99

C55 Brown

C44 Gray/Black

CAN 1 LOW

C33 Gray

CAN 1 HIGH

C C22 Orange/Brown CAN 2 LOW C11 Orange/Green CAN 2 HIGH

(~) RX (+)Ignition

Lt.Blue/Black Black Pink

A1100 Out AA1111 Out A1122

D6 White/Red
D D5 White/Blue D4 White/Green

Start/Stop external Yellow/Black In A1133

D3 Yellow/Red (+) Starter

(-)Hazards Brown/White Out A1144

D2 Yellow/Blue (+)12V

D2

Pink/Black Out A1155

D1 Yellow/Green

(+)Key Sense Purple/Yellow

A1166

Green/White

A1177

(~)RX White or Lt.Blue/Black

Green/Red

A1188

(~)TX

Blue or Lt.Blue

White/Black

A1199

Ground

Black

(~) TX

Lt.Blue

A2200

(+)12V

Red

TB-VW
SOLD SEPARATELY VENDU SÉPARÉMENT

White/Red or Green
White/Green or Green/Black

Ground Masse

ATLAS 1A Diode 1A Diode CUT

C2
(~)CAN LOW2
Orange/ Brown Orange/ Brun

7.5AMP Fuse Fusible

C1
(~)CAN HIGH2
Orange/ Red Orange/ Rouge

D2/ B4 OR RS2
(+)12V
Red/ Yellow Rouge/ Jaune

A11

1A Diode 1A Diode

D3
(+)FOOT BRAKE
Black/Red Noir/Rouge

OPTIONAL OPTIONNEL
A14
(+)HAZARD
Purple/Yellow Mauve/Jaune

A16

(+)STARTER

(+)KEY SENSE

Black/Red

Purple/Red

or Red/Black Mauve/Rouge

Noir/Rouge

ou Rouge/Noir

A1
(+)IGNITION1
Black/White or Black Noir/Blanc ou Noir

(+)IGNITION2
Black/Green or Black/Grey Noir/Vert ou Noir/Gris

C3
(~)CAN HIGH1
Orange/ Green Orange/ Vert

C4
(~)CAN LOW1
Orange/ Brown Orange/ Brun

DO NOT EXTEND THE WIRES (6 inches max). NE PAS RALLONGER LES FILS (6 pouces max.)
TRANSPONDER
Pin2

123 456 78 9 10 11 12 13 14 15 16

12 11 10 9 8 7

65432

1

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38

73

72 71 70 69 68 67 66 65 64

63

16 15 14 13 12 11 10 9 87654321

12

OBD-II connector Front view
Connecteur OBD-II Vue de face

BCM connector, Brown cover Under the dash Driver side,
Black 73-pins connector – Back
view
Connecteur BCM, Couvert Brun, Sous le tableau de bord
côté chauffeur Connecteur Noir de 73 pins – Vue de dos

Ignition Harness Black connector
Back view Harnais d’ignition Connecteur Noir
Vue de dos
WITHOUT HEATED STEERING WHEEL SANS VOLANT CHAUFFANT

Back view Black 2-Pin connector transponder connector Vue de dos Connecteur Noir de 2 pins connecteur du transpondeur

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 6 /13

THAR-VW6 – AUTOMATIC TRANSMISSION WIRING CONNECTION | GUIDE DE BRANCHEMENTS TRANSMISSION AUTOMATIQUE

OPTIONAL RF KIT KIT RF OPTIONNEL

RF-KIT KIT RF

RS2 IN (+)12V Battery RS1 Ground | Masse

Ground Masse

(-) Lock/Unlock input external control | Contrôle du (-) verrouillage devérrouillage entrée externe

OPTIONAL RFKIT KIT RF OPTIONNEL
BLUE FEMALE CONNNECTOR CONNECTEUR FEMELLE BLEU

CABLE MUST BE INCLUDED WITH THE RF KIT. CÂBLE DOIT ÊTRE INCLUS AVEC LE KIT RF.

RF KIT KIT RF

Yellow

(-) Lock

Purple

(-) Unlock Purple/White

Green

White

Orange

Orange/Black

Dk.Blue

Red/Blue

Lt.Blue/Black

Black

Pink

Yellow/Black

(-)Hazards Brown/White

Pink/Black

Purple/Yellow

Green/White

Green/Red

White/Black

Lt.Blue

B
In AA11 In AA22 In AA33 Out AA44 Out AA55 In AA66
A In AA77
In AA88 In AA99
A1100 Out AA1111 Out A1122
In A1133 Out A1144 Out A1155
A1166 A1177 A1188 A1199 A2200

IGNITION OUTPUT FOR CONVENIENT DEVICE. SORTIE IGNITION UTILITAIRE. Yellow | Jaune IGNITION
Yellow/Red | Jaune/Rouge BRAKE OUT

ISOLATE NOT CONNECTED ——————–ISOLER NON BRANCHÉ

Black | Noir PTS OUT Black | Noir PTS OUT

C55 Brown C44 Gray/Black C33 Gray
C C22 Orange/Bro5wPnIN CONN. C11 Orange/Green
D6 White/Red
D D5 White/Blue D4 White/Green6 PIN RED CONN. D3 Yellow/Red D2 Yellow/Blue D1 Yellow/Green

T-HARNESS – HARNAIS EN T
THAR-VW6

TB-VW
SOLD SEPARATELY VENDU SÉPARÉMENT

FEMALE T-HARNESS PLUG CONNECTEUR FEMELLE DU T-HARNAIS

16 PIN BLACK CONN.
MALE T-HARNESS PLUG
4 CONNECTEUR MÂLE DU T-HARNAIS

CONNECT BRANCHER

ATLAS

(+)FOOT BRAKE
Black/Red Noir/Rouge

OPTIONAL OPTIONNEL
A14
(-)HAZARD
Purple/Yellow Mauve/Jaune

12 11 10 9 8 7 6 5 4 3 2

1

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38

73

72 71 70 69 68 67 66 65 64

63

Back view Black 73-Pin connector C Vue de dos Connecteur C Noir de 73
pins
VESCM above driver kick panel Module VESCM En haut panneau latérale côté chauffeur

T-HARNESS – HARNAIS EN T

THAR-TB-VW
FEMALE T-HARNESS PLUG
CONNECTEUR FEMELLE
DU T-HARNAIS

2 PIN MALE T-HARNESS PLUG CONNECTEUR MÂLE DU T-HARNAIS

OBDII connector Front view Connecteur
OBDII Vue de face

MALE VEHICLE LT.GREY PLUG CONNECTEUR MÂLE DU VÉHICULE GRIS PÂLE

A1 2 4

14 PIN MALE T-HARNESS PLUG CONNECTEUR MÂLE DU T-HARNAIS

14 PIN BLACK CONN.
FEMALE T-HARNESS PLUG
B CONNECTEUR FEMELLE
1 DU T-HARNAIS

ISOLATE NOT CONNECTED ———————
ISOLER NON BRANCHÉ

16 PIN

16 PIN BLACK CONN.

MALE T-HARNESS PLUG

CONNECTEUR MÂLE

FEMALE T-HARNESS PLUG

DU T-HARNAIS

CONNECTEUR FEMELLE
1 A DU T-HARNAIS

MALE VEHICLE BLACK PLUG CONNECTEUR NOIR MÂLE DU VÉHICULE

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 7 /13

THAR-VW2 – AUTOMATIC TRANSMISSION WIRING CONNECTION | GUIDE DE BRANCHEMENTS TRANSMISSION AUTOMATIQUE

Hood pin only required on vehicles not equipped with a factory hood pin. Commutateur de capot requis seulement si le véhicule n’est pas équipé de cette composante.
SAFETY OVERRIDE SWITCH COMMUTATEUR DE SÉCURITÉ

OPTIONAL RF KIT KIT RF OPTIONNEL
WITH DATA-LINK: AVEC DATA-LINK:
OR OU WITH D2D: AVEC D2D:

RF-KIT REMOTE STARTER
KIT-RF DÉMARREUR À DISTANCE
WITH | AVEC DATA-LINK: Direct connection Branchement directe

Start / Stop external control Contrôle de démarrage/arrêt externe
(-) Lock/Unlock input external control | Contrôle du (-) verrouillage devérrouillage entrée externe

CONNECT BRANCHER

(+)Ignition

Yellow

(-) Lock

Purple

(-) Unlock Purple/White

Green

White

Orange

Orange/Black

Hood pin

Dk.Blue

Red/Blue

Lt.Blue/Black

Black

Pink

Start/Stop external Yellow/Black

(-)Hazards Brown/White

Pink/Black

Purple/Yellow

Green/White

Green/Red

White/Black

Lt.Blue

B
In AA11 In AA22 In AA33 Out AA44 Out AA55 In AA66
A In AA77
In AA88 In AA99
A1100 Out AA1111 Out A1122
In A1133 Out A1144 Out A1155
A1166 A1177 A1188 A1199 A2200

C55 Brown

C44 Gray/Black

CAN 1 LOW

C33 Gray

CAN 1 HIGH

C C22 Orange/Brown CAN 2 LOW C11 Orange/Green CAN 2 HIGH

D6 White/Red
D D5 White/Blue D4 White/Green D3 Yellow/Red D2 Yellow/Blue D1 Yellow/Green

Yellow | Jaune IGNITION OUT

ISOLATE NOT CONNECTED ——————–ISOLER NON BRANCHÉ

CONNECT ONLY IF BRAKE MUST BE PRESSED TO START
Yellow/Red | Jaune/Rouge BRAKE OUT BRANCHEZ SEULEMENT SI LE FREIN DOIT ÊTRE APPUYÉ AU DÉMARRAGE

T-HARNESS – HARNAIS EN T
THAR-VW2

TB-VW
SOLD SEPARATELY VENDU SÉPARÉMENT
FEMALE T-HARNESS IGNITION PLUG CONNECTEUR D’IGNITION DU T-HARNAIS FEMELLE

MALE VEHICLE IGNITION PLUG CONNECTEUR MÂLE D’IGNITION DU VÉHICULE
CUT

White/Red or Green
White/Green or Green/Black

DO NOT EXTEND THE WIRES
(6 inches max).
NE PAS RALLONGER LES FILS
(6 pouces max.)
TRANSPONDER WIRE
Pin2

D3
(+)FOOT BRAKE Black/Red Noir/Rouge

A14
(+)HAZARD
Purple/Yellow Mauve/Jaune

12

12 11 10 9 8 7

65432

1

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38

73

72 71 70 69 68 67 66 65 64

63

Back view Black 2-Pin connector transponder connector Vue de dos Connecteur Noir de 2 pins connecteur du transpondeur

BCM connector, Brown cover Under the dash Driver side, Black 73-PINS connector Back view
Connecteur BCM, Couvert Brun, Sous le tableau de bord côté
chauffeur Connecteur Noir de 73 pins – Vue de dos

C1
(~)CAN HIGH2
Orange/ Red Orange/ Rouge

C2
(~)CAN LOW2
Orange/ Brown Orange/ Brun

123 456 78 9 10 11 12 13 14 15 16

OBDII Front view Vue de face

AAT3-LSA3S T-HART-NHEASRSN-EHSASR-NHAIASRNEANIST E-N TTH-R-VTHWR2-VW2
MALE T-HARNESS IGNITION PLUG CONNECTEUR D’IGNITION MÂLE DU T-HARNAIS

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DCRYPTOR PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION AVEC DCRYPTOR

Page 8 /13

Parts required (not included) Pièces requises (non incluses)

1x FLASH LINK UPDATER,

1x FLASH LINK MOBILE

1x FLASH LINK MANAGER

OR

SOFTWARE | PROGRAMME

OU

1x

Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

1x FLASH LINK MOBILE APP

Smartphone Android or iOS with Internet connection

1x

(Internet provider charges may apply)
Téléphone Intelligent Android ou iOS avec connection

Internet (des frais du fournisseur Internet peuvent s’appliquer)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE. | AVANT LA PROGRAMMATION CONFIGURER LES OPTIONS DE L’UNITÉ ET SAUVEGARDER.

USE THE R-LINK* TOOL FOR PROGRAMMING
*Sold separately

(~)RX White or Lt.Blue/Black

(~)TX

Blue or Lt.Blue

Ground

Black

(+)12V

Red

R-LINK
SOLD SEPARATELY VENDU SÉPARÉMENT

1

12
x1
HOLD

UTILISEZ L’OUTIL R-LINK* POUR LA
PROGRAMMATION
*Vendu séparément

Connect the R-LINK instead of the TB-VW.
White/Red or Green White/Green or Green/Black

Branchez le R-LINK à la place du TB-VW.

WARNING: Close and open the driver door.

ATTENTION: Fermez et ouvrez la porte conducteur.

Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.

Appuyez et maintenir le bouton de programmation enfoncé: Branchez le harnais Data-Link à 4-Broches (connecteur Noir)
Les DELs alterneront entre un clignotement BLEU, ROUGE, JAUNE & BLEU/ROUGE.

3
RELEASE
4

ON

BLUE BLEU

5
TURN ON/RUN

LOCK

ACC ON

IGN

START

PUSH

Release the programming button when the Blue LED is ON.
If the LED is not solid BLUE disconnect the 4-PIN Data-link harness (Black connector) and go back to step1.

Relâchez le bouton de programmation quand la DEL Bleue est allumée.
Si la DEL Bleue n’est pas allumée, débranchez le harnais Data-Link à 4-Broches (connecteur Noir) et retournez au début de l’étape 1.

Connect the required remaining harnesses.

Branchez les harnais requis restants.

Turn the key to the Ignition ON/RUN position.

Tournez la clé à Ignition.

CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 9 /13

KEY BYPASS PROGRAMMING PROCEDURE 2/3 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/3

6

WITH T-HARNESS THAR-VW6
AVEC HARNAIS EN T
THAR-VW6

x1
PRESS

Press and release the programming button.

Appuyez et relâchez le bouton de programmation.

The BLUE LED will turn OFF.

La DEL BLEUE s’éteint.

7
x1
PRESS
HOLD

OFF

FLASH RAPIDLY

PRESS – HOLD
OFF

The BLUE LED will turn off.
Wait,
The BLUE LED will flash rapidly.

La DEL BLEUE s’éteint.
Attendre,
La DEL BLEU clignotera rapidement.

Press and hold the programming button.

Appuyez et gardez enfoncé le bouton de programmation.

The BLUE LED will turn OFF.

La DEL BLEUE s’éteint.

WAIT 3 SEC.

ON RELEASE

Wait,
The RED LED will turn ON.

Attendez,
La DEL ROUGE s’allume.

8
WAIT, this processe may take up
to 5 minutes Attendez, ce processus peut prendre jusqu’à 5 minutes
91

… … …

ON

ON

ON

Release the programming button.

Relâchez le bouton de programmation.

Wait, do not touch the vehicle or the module.

Attendez, ne touchez pas au véhicule ou au module.

The BLUE, RED and YELLOW LEDs will rapidly alternate.

Les DELs BLEUE, ROUGE et JAUNE alternent rapidement.

OFF

the RED LED to turn ON.

Wait,
ON the YELLOW LED will flash once.

La DEL ROUGE s’allume.
Attendez,
La DEL JAUNE clignote une fois.

Wait,

Attendez,

Wait for the RED and YELLOW LEDs to slowly alternate.

Attendez que les DELs ROUGE et JAUNE alternent doucement.

If the RED LED flashes slowly, the

Si la DEL ROUGE clignote

programming has failed, go back to lentement, la programmation a

step1 and start the programming over. échoué, recommencez à l’étape 1.

110

TURN OFF

LOCK

START

OFF
ACC ON PUSH

Turn the key to the OFF position.

Tournez la clé à la position Arrêt (OFF).

CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 10 /13

KEY BYPASS PROGRAMMING PROCEDURE 3/3 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 3/3

11

EVO-ALL
Disconnect all the connectors and after the Data-Link (4-pins) connector.
Débranchez tous les connecteurs et ensuite le connecteur Data-Link (4-pins).

12

FLASH LINK UPDATER*
OR OU

VEHICLE’S OBDII CONNECTOR
CONNECTEUR OBDII DU VÉHICULE
13

FLASH LINK MOBILE*

EVO-ALL

Microsoft Windows Computer with Internet connection*
Ordinateur Microsoft Windows avec connection Internet*
FLASH LINK MANAGER*
SOFTWARE | PROGRAMME
Smartphone*
(Internet provider charges may apply)
Téléphone Intelligent*
(des frais du fournisseur Internet peuvent s’appliquer)

Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

Utilisez l’outil: FLASH LINK UPDATER ou FLASH LINK MOBILE pour visiter le menu DCryptor.

*Parts required (not included) *Pièces requises (non incluses)

AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

APRÈS LA PROCÉDURE DE PROGRAMMATION DCRYPTOR COMPLETÉE : retournez au véhicule et rebranchez le connecteur 4-pins (Data-Link) et après, tous les connecteurs du EVO-ALL.

14

(~)RX White or Lt.Blue/Black

(~)TX

Blue or Lt.Blue

Ground

Black

(+)12V

Red

TB-VW
SOLD SEPARATELY VENDU SÉPARÉMENT

Connect the TB-VW instead of the R-LINK.

Branchez le TB-VW à la place du R-LINK.

White/Red or Green
White/Green or Green/Black

NOTE IF PROGRAMMING IS INTERRUPTED DURING THE PROCESS, SUCH AS A MODULE IS DISCONNECTED OR BY TURNING OFF THE IGNITION WITH THE KEY, IT IS POSSIBLE THAT THE VEHICLE WILL NO LONGER START NORMALLY, YOU MUST DISCONNECT AND RECONNECT THE VEHICLE BATTERY TO CORRECT THE SITUATION.
The module is now programmed. Le module est programmé.

NOTE
SI LA PROGRAMMATION EST INTERROMPUE DURANT SON PROCESSUS, COMME PAR UN DÉBRANCHEMENT DU MODULE OU PAR LA FERMETURE DE LA CLÉ DE CONTACT, IL EST POSSIBLE QUE LE VÉHICULE NE PUISSE PLUS DÉMARRER NORMALEMENT, VOUS DEVREZ DÉBRANCHER ET REBRANCHER LA BATTERIE DU VÉHICULE POUR CORRIGER LA SITUATION.
REMOTE STARTER / ALARM VERIFICATION PROCEDURE | PROCÉDURE DE VÉRIFICATION DU DÉMARREUR À DISTANCE / ALARME
Test the remote starter. Remote start the vehicle. Testez le démarreur à distance. Démarrez le véhicule à distance.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
OPTIONAL RF-KIT PROGRAMMING | PROGRAMMATION KIT RF OPTIONELLE

Page 11 /13

PROGRAM BYPASS OPTION | PROGRAMMATION DES OPTIONS DE CONTOURNEMENT
Program bypass option: Programmez l’option du contournement :

H2

Supported RF-KITS enable H2 Fortin 2
Activation KITS RF supporté H2 Fortin 2

OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING | PROGRAMMATION DU KIT RF FORITN SÉRIE 4 OU SÉRIE 9 (OPTIONNELLE)

1
ON TURN ON/RUN
IGN

OFF

2
TURN OFF

OFF
PUSH

The module must be programmed on the vehicle.

Turn the key to the ON/RUN position.

Turn the ignition to the OFF position.

Le module doit être programmé sur le véhicule.

Tournez la clé à la position ON/RUN.

Tournez la clé à la position
ARRÊT (OFF).

MAKE SURE THE IGNITION KEY HAS BEEN
IN THE OFF POSITION FOR
AT LEAST 5 SECONDS.
ASSUREZ-VOUS QUE LA CLÉ DE CONTACT EST À LA POSITION OFF DEPUIS AU
MOINS 5 SECONDES.

The YELLOW LED will turn ON solid.
La DEL JAUNE s’allumera solide.

The YELLOW LED will turn Off.
La DEL JAUNE s’éteindra.

3

ON

TURN ON/RUN

4
4X BRAKES

x4

IGN

PRESS

Turn the key to the ON/RUN position.
Tournez la clé à la position ON/RUN.

Press and release the brake pedal four times.
Appuyez et relâchez quatre fois
la pédale de frein.
The LED will turn off each time.
Le témoin s’inteindra chaque fois

The LED will turn ON solide.
Le témoin s’allumera.

The LED will flash rapidly.
Le témoin clignotera rapidement.

The YELLOW LED will turn ON solid.
La DEL JAUNE s’allumera solide.

The 3 LED will turn ON solid.
Les 3 DELs s’allumeront
solide.

5
ON EACH TRANSMITTER
SUR CHACUNE DES TÉLÉCOMMANDES
4 BUTTONS 4 BOUTONS
PRESS AND RELEASE
APPUYEZ ET RELÂCHEZ
PRESS AND RELEASE
APPUYEZ ET RELÂCHEZ
1 BUTTON 1 BOUTON
PRESS APPROX. 12 SEC. AND WAIT FOR THE BLUE LED TO TURN OFF THEN
BACK ON SOLID THEN RELEASE. APPUYEZ ET TENEZ ENFONCÉ LE POUR APPROX. 12 SEC, LA
DEL BLEUE S’ÉTEINT ET S’ALLUME SOLIDE,
ENSUITE RELÂCHEZ.
The LED will turn off each time. Le témoin s’éteindra chaque fois.
The LED will flash rapidly.
Le témoin clignotera rapidement.
The 3 LED will turn off each time. Les 3 DELs s’éteindront chaque fois.

6
OFF

TURN OFF

OFF
PUSH

Turn the ignition to the OFF position.

Tournez la clé à la position
ARRÊT (OFF).

The LED will turn Off. Le témoin s’éteint
The 3 LED will turn off. Les 3 DELs s’éteindront.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE

Page 12 /13

Start

UNLOCK

TURN ON/RUN

ON

All doors must be closed. Toutes les
portes doivent être fermées.

Remote start the vehicle.
Démarrez à distance.

Unlock the doors with the remote-starter remote or the OEM remote.
Déverrouillez les portes avec la télécommande du démarreur à distance ou la télécommande
d’origine.

Insert and Turn the key to the Ignition ON/RUN
position. Insérez et tournez la clé à la position “ON/RUN”.

Press the brake pedal.
Appuyez sur la pédale de
frein.

The vehicle can now be put in to gear and driven.
Vous êtes maintenant prêt à
embrayer et prendre la route.

Page 13 / 13

ALL

MODEL: EVO-ALL DATE:02/2019 FORTIN.CA SN: 000000 00000
MADE IN CANADA © 2018 ALL RIGHTS RESERVED
Module label | Étiquette sur le module

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
Notice: Mise à jour microprogramme et Guides d’installations Des mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifiez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit.

WARNING The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifier tous les fils et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifié. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET

Documents / Resources

FORTIN 92551 EVO-ALL Universal All In One Data Bypass and Interface Module [pdf] User Manual
TB-VW, VOLKSWAGEN ATLAS 2018, 92551 EVO-ALL Universal All In One Data Bypass and Interface Module, 92551 EVO-ALL, Universal All In One Data Bypass and Interface Module, All In One Data Bypass and Interface Module, Data Bypass and Interface Module, Interface Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *