FIXED-125337-MagStand-2-In-1-Wireless-Charger-with-MagSafe-LOGO

FIXED 125337 MagStand 2-In-1 Wireless Charger with MagSafe

FIXED-125337-MagStand-2-In-1-Wireless-Charger-with-MagSafe-PRODUCT

FIXED MagStand – User manual

Thank you for purchasing the FIXED MagStand stand. The main charging area of the stand is designed for Apple iPhone with MagSafe Support. For full functionlity of the charging, the phone must be without a case or in a case with Magšate support. Ihe second charging area is compatible with devices with 0I standard.

Read this manual before use.

The high-performance FIXED MagStand fast wireless charger in the form of a stand allows you to wirelessly charge with up to 15W of power using the main charging area. The charging power of the secondary charging area is up to 5 W.

Instructions for use

  1. Connect the included cable to the USB-C port on the wireless charger.
  2.  Then connect the cable (USB-C to USB-C) into the USB-C port of the adapter, which has enough power for maximum wireless charging performance.
  3.  (PD charging standard technology with a minimum power of 20 W.)
  4.  (This charger also supports USB-A to USB-C cable with adapters with 0C 3.0 support.)
  5.  Plug the adapter into a socket.
  6. Then place your Magšate enabled iPhone near the main charging area and the phone will attach itself thanks to the buit-in magnets.
  7. Place a Ul wireless charging enabled device (e.g. IWS headphones, smartphone, etc.)on the secondary charging area to begin Wireless
    charging.
  8.  The charger may make louder noises when the device IS not properly placed on the wireless charger or when the cover is abnormaly
    thick.

LED indicator

  • Purple -wireless charger is connected to the mains
  • Red-standby mode, no charging, fuly charged device
  • Blue- charging
  • Flashing blue- foreign object detected on the charger (FOD), charging anomaly
  • The LED always switches off after 3 minutes.
  • Product specifications:
  • Qutput: 5W/7.5W/10W/T5SW (main charging area with MagSafe support)
  • Output: 5W (secondary charging area
  • Input: 5V/3A, 9V/3A, 12V/2.5A
  • Dimensions: 100x100x143mm
  • Weight: 218 g
  • Frequency: 10-205KHz
  • Material: ABS, Silicone
  • Efficiency: 2 72%

Package content

  • Ix FIXED MagStand wireless charging stand
  • Tx User manual
  • IX USB-C to USB-C Supply cable – I m

Notes:
The product is warranted in accordance with the regulations in force in the countries where ft is sold. In case of service problems, contact
the dealer from which you have purchased the product.
IXED assumes no liability for damage caused by improper use of the product.

Product care and maintenance
Use a soft cloth to clean the body of the stand.

Safety precautions

  • Do not expose the device to rain or snow or immerse it in water.
  • Do not leave the stand in the car in the sun.
  • Do not expose the device to direct sunlight or leave it near heat sources.
  • Do not use the stand if it has been subjected to a strong impact, if it has fallen, or if it has been damaged in any way.
  • Do not disassemble the device, there is a risk of electric shock and/or burns. Do not modify the power cable.
  • Keep out of reach of children. Unauthorized opening or modification of product parts will void the warranty.

Problem-solving:
In case of problems with the product, you can contact our support at www.fixed.zone/podpora This product is CE marked in accordance with EMC Directive 2014/35/EU and RoHS Directive 201/65/EU. FIXED.zone a.s. hereby declares that this product is in compliance With essential requirements and other relevant provisions of EMC

  • Directives 2014/85/EU and 201/65/EU.
  • FIXED.zone a.s.
  • Kubatova B
  • Ceské Budějovice 37004
  • Czech Republic

Documents / Resources

FIXED 125337 MagStand 2-In-1 Wireless Charger with MagSafe [pdf] User Manual
125337, MagStand 2-In-1 Wireless Charger with MagSafe, 125337 MagStand 2-In-1 Wireless Charger with MagSafe

Leave a comment

Your email address will not be published.