Fingerprint Lock User Manual

FINGERPRINT LOCK

I .USB Interface:

The product is charged by USB. Please fully charge the product for the first time.

Components:

1. USBPort
2. LED Light
3. Fingerprint Reader
4. LockBeam

II .Indicator

Use 3-color indicator. Different indicator represents different devices and status.
Please check the details as below chart:

Ill .Description Of First Administrator’ s Fingerprint Record

1. Long press sensor 3 seconds
2. Left your finger when blue light flash
   
3. Start record the fingerprint when green light flash
4. Record 10 times with the same finger, and the blue light and green light flashes
5. /;; ltreco unsuccessful when red light flash
   
   5.lt records successful when blue l~ht flash
   
6. Total of 1 o times of collection was successful, with a loud sound “Di” ,and green light Dynam Devil 3D DY8954 Instruction Manual flash continuosly the admistors fingerprint was
   recorded successfully.
   

IV. Number 2 to 10 Fingerprint Recording Instructions

1. Long press sensor 3 seconds
2. .Administrator authorize fingerprint when blue light flash continuously.
3. Start record the fingerprint when green light flash
4. Record 10 times with the same finger, and the blue light and green light flashes
5. ltrecoJ s unsuccessful when red light fiash
   
   5.lt records successful when blue light flash
   
6. Total of 10 time: ofc.ollec. tion was successful, with a loud sound “di” ,and green light flash continuously, the fingerpnnt was reoorded successfully.
   

Remarks:

1. The first and second fingerprints are the administrator fingerprint by default.
2. Collecting the second to tenth fingerprints requires administrator fingerprint authorization.

V .Description Of Delete Fingerprint

1. Long press sensor6-10 seconds
2. Administrator authorize fingerprint when red light flash continuously
3. The fingerprint was deleted successfully when green light flash continuously and sound continuously

VI.Specifications

Support 360 degree angel fingerprint recognize Resolution: 508DPI ESD: +/-12kVair, +/-BkV contact FRR: <1% FAR: <0.002%
Recognize time: <300mS Battery: 3. 7V 80mAh Charger: 5V 200MA

Remarks:

Only the administrator can delete the fingerprint and delete all the fingerprints at once.

VII.Low voltage

When the voltage ~3.5V, the red indicator flash fast for 15s. If keep in the status of low batter, it will alarming per minute.

Read More About This Manual & Download PDF:

Fingerprint Lock User Manual – Download [optimized]
Fingerprint Lock User Manual – Download

References

• User Manual