Performance Turf series
Tee Box – 10’x4’
T-660-4X10
Ball tray not included, sold separately
Parts & assembly
Please check your box for accuracy.
All of these pieces should be included.
| ITEM | PART NUMBER | QTY. |
| A | TLCM-C-2 | 4 |
| B | TLCM-E-2 | 6 |
| C | TLCM-P-2 | 10 |
| D | TLCM-P-4 | 4 |
| E | TLCM-PINS50 | 1 Bag |
| F | 660-TL-4X10 | 1 |
RUBBER BASE
HARDWARE
GRASS PANELS
- Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)
Place the rubber base pieces (A, B) on the ground together as shown.
- Lay the Performance
Turf (F) on top of thebase area to fit the frame.
NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base. - Secure rubber base pieces (A, B) together by pushing Connectors into adjacent holes in the sections.
2-Pin Connectors (C) forside connections
Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
Steps for securing the pins:
• As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (E) into the holes from underneath.
• From the top, push the rubber 2-pin (C) or 4-pin (D) Connectors into position, guiding them onto the plastic push pins.
• Gently tap with a hammer until the connectors are flush with the base surface.
- Insert real tees anywhere on the Performance Turf to practice all kinds of tee shots.
Double the Life of Your Warranty Today for Free
For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at:
FiberbuiltGolf.com/register
Be sure to select the following:
Performance Turf series
Tee Box – 10’x4’
SKU#: T-660-4X10
Documents / Resources
 |
FIBERBUILT T-660-4X10 Performance Turf Series Tee Box [pdf] Instructions T-660-4X10 Performance Turf Series Tee Box, T-660-4X10, Performance Turf Series Tee Box, Turf Series Tee Box, Tee Box |