FIAMMA ROLLO VENT 50 Roller Blind for Rooflight
Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer.
Instructions for use
To hook the blind system B or the mosquito screen C, lift and pull the aluminum profit le (Fig.2). To unhook the blind system from the mosquito screen press the handle (Fig.3).
Flammer declines all responsibility for any personal injury and damage to property due to incorrect assembly or use of the product; it is suggested to keep the instructions inside the vehicle. The assembly of the product must be carried out according to the assembly instructions: the product must not be modified in any way.
CARE AND MAINTENANCE: Never use aggressive products such as glass cleaners, all-purpose cleaners, abrasives or dish-washing detergents. Also, never use alcohol-containing detergents, solvents or any corrosive liquid.
Warranty Fiamma In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
reserves the right to modify at any time,
without notice, prices, materials,
specifi cations and models or to cease
production of any model.
Documents / Resources
|FIAMMA ROLLO VENT 50 Roller Blind for Rooflight [pdf] Instruction Manual|
ROLLO VENT 50, Roller Blind for Rooflight, Roller Blind, Blind for Rooflight, Blind