FGZZROU iPad 10th Generation Keyboard Case

Product Specifications

1. Bluetooth 3.0 Interface standard
2. Operating distance: 10 meters
3. Modulation system: GFSK
4. Operation Voltages: 3.0-4.2V
5. Operation Current: <2.5mA
6. Standby Current: 0.3mA
7. Sleeping Current: <40uA
8. Charging Current: >200mA
9. Standby Time: >100 days
10. Charging time: 3-4 hours
11. Battery Capacity: 150mA/420mA
12. Uninterrupted Working Time: 100o urs
13. Lithium Battery life: 3 years
14. Key Strength: 80+-10g
15. Key life: 5 million strokes
16. Operating Temperature: -10-+55c

Getting Started Guide

1. Button
   Power toggle switch: stride switch ON or OFF to control the device power turn on or turn off.
   Connect Button: Under the Power button turn on case, ready to be connect to ipad.
2. Indicator
   Power indicator: urn on the power toggle switch. The state indicator light will be on for 4 seconds. then the light will go off.
   Bluetooth connect indicator: Press on the [connect] button, the [Bluetooth] indicator light will be blinking, indicator light will stay on until the keyboard connect with your device.
   Uppercase and lowercase indicator: indicator light will stay on under the uppercase.
   Charging indicator: indicator light will be on when the keyboard will be charging by USB.

Charing

When the battery is low. the power indicator light fishing, that means need to charge the bluetooth keyboard.

1. Connect the Bend of the original USB cable to the keyboard.
2. Connect the A end of the USB cable to the power adapter or A PC USB interface.
3. When charging charging “Charge” indicator will light up, when the battery is full of “Charge” will automatically lights go out.

Bluetooth keyboard connecting operation steps

1. To set the keyboard power button to “ON” position. the power indicator light will light up for 4 seconds, and then GO out: Press the “Connect” to Connect a keyboard key. Bluetooth connection will twinkie lights when key Bluetooth is started, can be connected to the tablet The computer.
   
2. Open and unlock the tablet computer, click on the flat Board computer “Settings” icon.
   
3. Select “Bluetooth” in “Settings” interface Enter the bluetooth Settings interface. click on the bluetooth Pass to open the connection.
   
4. Turn on the Bluetooth switch and the tablet will automatically search for Bluetooth keyboard devices.
   
5. Discover the Bluetooth kibozed device: Bluetooth Keyboard, and click on it, the Bluetooth keyboard will automatically connect.
   
6. After the Bluetooth connection is successful, the pairing indicator is off, and “Connected” will appear in the list of Bluetooth devices.
   

Caution

1. In order to extend service life. we recommend you turn the keyboard off when there is long time no interactive.
2. We recommend to charging the keyboard only when the [power] indicator light start blinking. it is time to recharge the keyboard. It’s better not less than 3 hours when every time charging.

Documents / Resources

FGZZROU iPad 10th Generation Keyboard Case [pdf] User Manual iPad 10th Generation Keyboard Case, 10th Generation Keyboard Case, Generation Keyboard Case, Keyboard Case, Case

References

• User Manual