FENIX TK40 Flashlight

Overview
The Fenix TK40 flashlight provides up to 630 lumens with a beam reach up to 275 meters. It’s built for outdoor search and exploration, offering multiple primary output levels, four flashing modes, and digitally regulated output for consistent brightness.
Specifications
| Maximum brightness | 630 lumens (Turbo, 2 hrs, default output) |
| Primary output levels | Low 13 lumens (150 hrs); Mid 93 lumens (20 hrs); High 277 lumens (6.8 hrs) |
| Flashing modes | Strobe, Slow flashing, SOS, Fast flashing |
| Max beam length | 275 meters |
| Central light strength | 18,000 candelas |
| Impact resistance | Withstands impact from 1.5 meters |
| Waterproof rating | IPX-8 Standard |
| Included accessories | Lanyard, shoulder strap, one key ring, two spare O-rings, rubber switch boot |
| LED type | Cree MC-E LED (lifespan 50,000 hours) |
| Battery compatibility | Eight 1.5V AA batteries (Ni-MH or Alkaline) |
| Dimensions | 200 mm (length) x 40 mm (body tube diameter) x 62 mm (head diameter) |
| Weight | 266 g (excluding batteries) |
| Switch | Push-button tail cap switch |
| Output regulation | Digitally regulated output, maintains constant brightness |
| Materials/finish | Durable aircraft-grade aluminum; Type III hard-anodized anti-abrasive finish; anti-reflective coated ultra-clear glass lens |
Quick Setup
- Turn on/off: Press the tail cap switch to turn the flashlight on or off.
- Change primary output: With the light on, press and hold the tail cap switch for more than one second to switch to the next primary output. The flashlight remembers the selected output after switching off.
- Select a flashing mode: With the flashlight on, double-click the tail cap switch to select the flashing mode corresponding to the current primary output. Double-click again to return to primary output mode.
- Flashing-to-primary mapping: Turbo → Strobe, Low → Slow flashing, Mid → SOS, High → Fast flashing.
INTRODUCTION
- The Fenix TK40 flashlight delivers an amazing 630 lumens of brightness and throws an impressive 275-meter-long beam, much brighter than a 10-watt HID light and similar in performance to a car spotlight.
- The TK40 is designed for outdoor search, cave exploration, or any activity that requires a reliable high output flashlight.
- Unique in the flashlight industry for its combination of high quality and versatility, the TK40 fuses its outstanding performance with a perfect user interface, excellent ergonomics, and light weight to make it the best handling flashlight in its class.
- Moreover, with 4 levels of primary output, 4 flickering modes, and an ability to run for 12 continuous nights, the TK40 has the versatility to meet many different lighting requirements, making it an indispensable illuminating tool for outdoor exploration, cross-country vehicles, etc.
OVERVIEW

Features
4 types of primary output:
- Turbo (630 Lumens, 2Hrs, Default output) -Low (13
- Lumens, 150Hrs)-Mid (93 Lumens, 20Hrs) High
- (277 Lumens, 6.8Hrs)
- 4 types of flashing output: Strobe, Slow flashing, SOS,
- Fast flashing
- Max beam length: 275 meters
- Central light strength: 18000 candelas
- Withstand impact from 1.5 meters
- Waterproof to IPX-8 Standard
- Included accessories: lanyard, shoulder strap, one
- key ring, two spare O-rings, and a rubber switch boot
- Cree MC-E LED with lifespan of 50,000 hours
- Uses eight 1.5V AA (Ni-MH, Alkaline) batteries
- 200mm (Length) x 40mm (Diameter of the body tube)
- x 62mm (Diameter of the head)
- 266-gram weight (excluding batteries)
- Digitally regulated output, maintains constant brightness
- Push-button tail cap switch
- Capable of standing up securely on a flat surface to serve as a candle
- Patented structure avoids circuit damage from reverse connection of battery
- Made of durable aircraft-grade aluminum with a Premium Type III hard-anodized anti-abrasive finish. Toughened ultra-clear glass lens with anti-reflective coating
- Notice: The above-mentioned parameters (tested with 2500mAh Ni-MH batteries) are approximate and may vary between flashlights, batteries, and environments.
Operation
- Press the tail cap switch to turn the flashlight on/off.
- Turn on the flashlight, and press the tail cap switch for more than one second to switch to the next primary output. The flashlight will remember the selected output when switched off.
- Flashing outputs: Each primary output corresponds with its flashing output. Double-click the tail button switch for the corresponding flashing output when the flashlight is turned on. Another double click will return the light to the primary output mode.
- The 4 flashing outputs each correspond to their primary output modes as follows. (Turbo Strobe, Low Slow flashing, Mid SOS, High -Fast flashing)
- Security setting: In order to avoid potential security hazards as a result of the heat generated in turbo mode when the light is unattended, TK40 will automatically switch to high lighting mode when working continuously at its turbo mode over 30 Minutes.
- If you need to continue using turbo mode, please reset to its turbo mode manually.
- Notice: the video for TK40 operation can be watched and downloaded through the Fenix official website; please log onto the service channel -‘light operation video’.
Battery Replacement
- Unscrew the tail cap to take out the battery magazine (Eight AA batteries divided into four individual packs of two), insert the batteries with the negative terminal towards the spring.
- After loading the batteries into the magazine, insert the magazine with its top spring towards the LED assembly. Rotate the tail cap clockwise, then depress the tail cap switch to test.
Usage and Maintenance
- Please don’t disassemble the sealed head; doing so can cause damage to the flashlight and will void the warranty.
- A high-power flashlight should use a battery with high current discharge capability; we suggest using a high-performance Ni-MH rechargeable battery. Using an alkaline battery will lower the runtime of this high-intensity flashlight.
- Please use high-quality batteries with the same electronic capacity, also we suggest using batteries of the same brand, and take out the battery if the flashlight will not be used for a long time, or it may cause damage from electrolyte leakage or battery explosion.
- If you leave the flashlight unused for a couple of days, please unscrew the head 2.5 turns to prevent slow discharge of the battery.
- The flashlight’s automatic overheating protection may cause the light to flicker during prolonged running in a hot environment. If this occurs please turn to a lower output to cool the flashlight. Normal operation will be restored once the light cools down.
- Please replace the O-rings if they are damaged after a long period of use. O- rings should be regularly lubricated to prevent erosion of the rubber. Doing so will also keep the flashlight properly sealed against water.
- Please clean the contacts of your light from time to time, especially if the light flickers or doesn’t light up.
There may be several reasons for a flickering or not working light:
- Reason A: The batteries need replacing
- Solution: Replace batteries (Please confirm the correct installation of anode and cathode).
- Reason B: The threads, PCB board contact, or other contacts are dirty.
- Solution: Clean the contact points with an alcohol soaked cotton swab.
- If the above methods don’t work, please contact your distributor and refer to the warranty policy.
- Notice: The routine cleaning video can be watched and downloaded through the Fenix official website. Please log onto the service channel->’ maintenance for light’.
Product Warranty
We will replace products afflicted with manufacturing defects within 15 days of purchase and repair a light free of charge within 24 months of purchase if problems develop with normal use; if repair is required after 24 months from the date of purchase, we will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
Warranty Card Registration
- We kindly suggest that you register your guarantee card on the official website for Fenixlight Limited.
- You can get an extra six-month warranty period once you have successfully registered. What’s more, you could take part in the questionnaire lottery at the same time.
Warning
- TK40 is a high-intensity lighting device and is capable of causing eye damage; avoid shining the light directly into the eyes
- Avoid the use of a 14500 rechargeable Li-ion battery, or damage will be caused to the light circuit.
Troubleshooting
Light flickers or doesn’t light up
- Batteries may need replacing: Replace batteries and confirm correct installation of anode and cathode.
- Dirty contacts: Clean the contact points (including PCB board/thread contacts) with an alcohol-soaked cotton swab.
- Automatic overheating protection causes flickering in hot environments
- Turn to a lower output to cool the flashlight. Normal operation resumes once the light cools down.
Maintenance/sealing
- If O-rings are damaged after long use, replace them; regularly lubricate O-rings to prevent erosion and help maintain proper sealing.
- If the above steps do not resolve the issue, contact your distributor and refer to the warranty policy.
Documents / Resources
![]() | TK40 Flashlight |
References
- User Manualmanual.tools

