3-Axis Stabilized Handheld Gimbal for Camera
Quick Start Guide

G6 Plus Overview

• Scan QR codes to download a detailed manual for more usage of the gimbal.

User Guide

TIPS

1. Please mount the camera or smartphone before powering on the gimbal.
2. When the battery is low, please charge the gimbal.
3. When not in use, turn off the gimbal and then remove the battery.

Install Battery

Remove the bottom cap, insert a 26650 battery and then tighten the cap.

Battery Model 26650 Li-ion Battery

Charging

Please fully charge the battery before powering on the gimbal for the first time.
Charging with Micro USB cable.

Put the Camera / Smartphone on
Correctly place the camera on the adjustment sliding plate, and tighten it with a thumb screw in the middle sliding chute.
If the camera doesn’t have the 1/4-20 screw hole, please put the camera on the mount adapter, which has a 1/4-20 screw hole, and then mount it following the above steps.
You can also put your smartphone on the smartphone adapter(Optional accessory), then mount it following the above steps.

Balance the Gimbal ( Before power on )
Slightly adjust the positions of the vertical arm, cross arm, sliding arm, and adjustment siding plate, and power on the gimbal after the center of gravity of 3 axes is balanced.
Scan QR codes to download the detailed manual and refer to the chapter “Balance the Gimbal” for the operation.

Steps

• Vertical Arm
• Cross Arm
• Sliding Arm
• Adjustment
• Sliding Plate

Power on / off
Long press the function button, and the display will show and release it when you hear the beep tone.

Download and Install App

* Requires iOS 9.0 or later, Android 5.0 or later

Use the Feiyu ON App when you mount your camera on the gimbal

https://itunes.apple.com/us/app/feiyu-on/id1170606381?mt=8	http://www.feiyu-tech.cn/download/App/Feiyu_On.apk

Use the Vicool App when you mount your smartphone on the gimbal

https://itunes.apple.com/us/app/vicool/id1327620365	http://www.feiyu-tech.com/download/App/Vicool.apk

Specifications

DISCLAIMER
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use of products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect, or third-party losses).
For any unknown sources of use, we will not be at any services.
The updating and changes of product firmware and program may cause changes in function descriptions in this user manual, please read the instructions carefully before upgrading the firmware and using the corresponding user manual.
You can get the latest user manual from the official website: www.feiyu-tech.com
FeiyuTech reserves the right to amend this manual and the terms and conditions of using the gimbal at any time.

http://www.feiyu-tech.com/download/Manual/G6_Plus_Manual_en.pdf	http://www.feiyu-tech.com/play/104.html

Guilin Feiyu Technology Incorporated Company
For more information, please visit our official website
E-mail: service@feiyu-tech.com
www.feiyu-tech.com
Tel: +86（0）773 2320865
Due to software and hardware improvements, your actual product might differ from the descriptions and pictures in this user manual. You can get the latest user manual from the official website.

Documents / Resources

FEIYUTECH G6 Plus 3 Axis Stabilized Handheld Gimbal for Camera [pdf] User Guide G6 Plus, 3 Axis Stabilized Handheld Gimbal for Camera, G6 Plus 3 Axis Stabilized Handheld Gimbal for Camera, G6 Plus 3 Axis 4 In 1 Brushless Gimbal Stabilizer

References

• User Manual