Mighty Manuals & User Guides

دفترچه راهنمای دستگاه فرز سایانگ مدل Marathon Mighty ساخت شرکت ACTIVESHOP SH20N

29 اکتبر 2025

ACTIVESHOP SH20N Saeyang Milling Machine Marathon Mighty Important Information Professional milling machine Marathon Mighty, is characterized by high quality workmanship, small dimensions and modern design. Clear and legible control panel, intuitive operation. It provides an excellent opportunity to work both…

برند: اکتیو شاپ

کتابچه راهنمای قالب MIGHTY 38 Super Gold Match TNT Taper Crimp Die Instruction

1 نوامبر 2024

MIGHTY 38 Super Gold Match TNT Taper Crimp Die  Installation Instruction Place seated round into the plate or tool head. STEP 1 Turn the die down by hand to set the desired crimp. STEP 2 Adjust up or down by…

Brand: Mighty

راهنمای نصب MIGHTY Magnum Primer Pocket Swager

31 اکتبر 2024

MAGNUM & PUA SWAGE INSTRUCTIONS Magnum Primer Pocket Swager STEP 1 Refer to Magnum & Pua Hold Down Die instrutions to set up your die.STEP 2 Place the swage onto the ram.STEP 3 Place the universal stabilizing cup over the…

Brand: Mighty

راهنمای نصب MIGHTY Magnum و PUA Decapping

31 اکتبر 2024

MIGHTY Magnum and PUA Decapping Installation Guide STEP 1 Hand turn the tip into the shaft. Put a touch of purple vibra-tite 111 on the threads. Snug the pin into the shaft with a 3/16 wrench. Do not over tighten,…

Brand: Mighty

راهنمای دستور العمل جعبه مگنوم MIGHTY BAF310Etopg

31 اکتبر 2024

MIGHTY BAF310Etopg Magnum Case Hold Down Die Instruction Manual STEP 1 Hand turn the tip into the shaft. Put a touch of purple vibra-tite 111 on the tip barrel shoulder where it meets the shaft. Snug the tip into the…

Brand: Mighty

راهنمای نصب قالب های Decapping MIGHTY XMA

31 اکتبر 2024

XMA & XMS DECAPPING INSTRUCTIONS XMA Decapping Dies STEP 1 Disassemble the die. Degrease all parts (of XMS die). XMA Die does not require degreasing. STEP 2 Add touch of vibra-tite 111 between shoulder of shaft and pin. Snug it…

Brand: Mighty

کتابچه راهنمای دستور العمل کیس MIGHTY XMA Case Hold Die

31 اکتبر 2024

XMA & XMS HOLD DOWN INSTRUCTIONS XMA Case Hold Down Die STEP 1 Disassemble the die. Degrease all parts (of XMS die). XMA Die does not require cleaning.STEP 2 Add touch of vibra-tite 111 between shoulder of shaft and tip.…

Brand: Mighty

راهنمای نصب کیس Super Duty MIGHTY Hold Die

31 اکتبر 2024

SUPER DUTY DECAPPING INSTRUCTIONS Super Duty Case Hold Down Die STEP 1 Install pin tip on shaft with a touch of purple vibra-tite 111 between shoulder of shaft and pin. Snug with 3/16 wrench. Do not over tighten, or it…

Brand: Mighty

راهنمای نصب قالب Decapping MIGHTY Big Boy

31 اکتبر 2024

BIG BOY DECAPPING DIE INSTRUCTIONS Big Boy Decapping Die STEP 1 Remove the shaft from the die body. Turn the pin into the shaft.STEP 2 Add a touch of vibra-tite 111 to the shoulder of the shaft and pin. Snug…

Brand: Mighty

راهنمای نصب MIGHTY Rifle Flare Expander Die

31 اکتبر 2024

RIFLE FLARE EXPANDER DIE INSTRUCTIONS Rifle Flare Expander Die STEP 1 Turn the die into the tool head.STEP 2 Lower the tool head over a sized case.STEP 3 Set flare expansion to your desired flare by turning the flare expander…

Brand: Mighty