Laserliner - logoCondense Spot XP
راهنمای کاربریLaserliner Condense Spot XPLaserliner Condense Spot XP 2

Laserliner Condense Spot XP - icon 2Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference.

Function/Application

The CondenseSpot is an infrared temperature measuring instrument with an integrated hygrometer that permits non-contact temperature measurements on surfaces as well as the measurement of relative humidity and ambient temperature. The instrument measures how much electromagnetic energy is emitted in the infrared wavelength range and uses this information to calculate surface temperature. During this process, two additional integrated sensors detect relative humidity and ambient temperature. The dew point is also calculated.

Laserliner Condense Spot XP - figure 1Laserliner Condense Spot XP 3

1 low battery charge 6 min/max and average measurement values
2 stability progress bar for relative
humidity measurement
7 dew point temperature (D Temp) and ambient temperature  (A Temp) in °C or °F
3 laser beam switched on, temperature measurement (infrared) 8 condense water indicator
4 measurements in °C or °F 9 last measurement value will be displayed brie y (7s)
5 relative humidity in % 10 replace battery

Laserliner Condense Spot XP 4Laserliner Condense Spot XP 5

Laser: The laser is a targeting aid to sight the location for the infrared measurement. Only the surface‘s temperature is measured. Laserliner Condense Spot XP 6

7. Displaying Min/Max/Avg, Ambient temperature, Dew point temperatureLaserliner Condense Spot XP 7

8. Dew point temperature is the temperature at which current air conditions would produce condensation. The CondenseSpot calculates the dew point temperature from ambient temperature, relative humidity, and ambient atmospheric pressure. In combination with the infrared thermometer, thermal bridges are easily detected. If the temperature of the measured location drops below the dew point, condensation (water) will form on the surface.Laserliner Condense Spot XP 8

9. رطوبت نسبی
The relative humidity is indicated in relation to the maximum possible humidity (100 %) at which air forms water vapor. The ability of air to hold water is temperature-dependent. Thus humidity is the volume of water vapor in the air. The range for humidity is 0 … 100%. 100% = saturation point.
Under these conditions for temperature and atmospheric pressure, air cannot absorb any more water.Laserliner Condense Spot XP 9

When temperature fluctuations (± 1 °C) and/or changes to relative humidity (± 1%) are rapid, the sensor must adapt itself to the new conditions. An hourglass with a progress bar is displayed during this stabilization process.
During this process, displayed values are only approximations. Only after these symbols have been switched off is a stable value presented which represents maximum accuracy.

10. Setting the emission coef cientLaserliner Condense Spot XP 10

A built-in sensor head detects the material/surface-specific infrared rays emitted by every object. The level of these emissions is determined by the material‘s emission coefficient (0.01 to 0.99). This instrument is preset to an emission coefficient of 0.95, which is applicable to most organic materials as well as plastics,  ceramics, wood, rubber, and stone. For details of those materials with a different emission coefficient, please refer to the table.

Unknown emission coefficient:
Apply masking tape or black matt paint to the surface of the area whose temperature you wish to measure. Wait until the tape/paint has heated up.
The temperature of the surface can then be measured with an emission coefficient of 0.95.

11. Emission coef cient tables
غیر فلزات

پنبه نسوز 0.93 سنگ اهک 0.98
اسفالت 0.95 سنگ مرمر
Black, dull finish Greyish, polished
0.94
0.93
بازالت 0.70
Brick, red 0.93
کربوروندوم 0.90 بنایی 0.93
سرامیک 0.95 رنگ
Black, matt
Heat-resistant White
0.96-0.98 0.92
0.85-0.95
چین
Brilliant white With glaze
0.7 - 0.75 0.92
رس 0.95 مقاله
همه رنگ ها
0.95-0.97
Coal Non-oxidised 0.8-0.9
پلاستیک
Translucent PE, P, PVC
0.95
0.94
Concrete, plaster, mortar 0.93
پنبه 0.77 لاستیک
سخت
نرم، خاکستری
0.94-0.95 0.89
Earthenware, matt 0.93
پارچه 0.95
شیشه 0.85-0.94 شیشه کوارتز 0.93
گرافیت 0.7-0.8 برف 0.80
سنگ ریزه 0.95 خاک 0.9-0.98
گچ 0.8-0.95 قیر 0.79-0.84
سینک حرارتی مشکی، آنودایز شده 0.98 کاغذ تار 0.91-0.93
رنگ ترانسفورماتور 0.94
پوست انسان 0.98 Wallpaper, light-colored 0.88-0.90
یخ
واضح
With heavy frost
0.97
0.98
آب 0.93
چوب
درمان نشده
راش، برنامه ریزی شده
0.8-0.95
اهک 0.3-0.4
Lime maim brick 0.95

فلزات

Alloy A3003 Oxidised
Roughened
0.3
0.1 - 03
آهن، جعلی مت 0.9
رهبری
خشن
اکسید شده
0.4
0.2 - 0.6
Aluminium Oxidised
جلا
0.2 - 0.4
0.04 - 0.06
Molybdenum Oxidised 0.2 - 0.6
برنج
جلا
اکسید شده
0.3
0.5
Nickel Oxidised 0.2 - 0.6
مشکی پلاتینیوم 0.9
مس
اکسید شده
Elect. terminal strips
0.4 - 0.8 0.6 فولاد
Cold rolled Ground plate
Polished plate
آلیاژ (8٪ نیکل،
18% chromium) Galvanised Oxidised
به شدت اکسید شده
Freshly rolled Rough, flat surface
زنگ زده، قرمز
Sheet, nickel-plated Sheet, rolled
0.7 - 0.9 0.4 - 0.6 0.1
0.35
0.28
0.80
0.88
0.24
0.95- 0.98 0.69
0.11
0.56
Haynes Metal alloy 0.3 - 0.8
Inconel
اکسید شده
Sandblasted Electropolished
0.7 - 0.95 0.3 - 0.6 0.15
اهن
اکسید شده
With rust
With red rust
0.5 - 0.9 0.5 - 0.7 0.61 - 0.85
Iron, cast
اکسید شده
Non-oxidised
Molten mass
0.6 - 0.95 0.2
02 - 03
Zinc Oxidised 0.1

اطلاعات فنی

Technical revisions reserved. 08.13

Measured quantities °C (°F) infrared temperature measurement, %rH relative humidity, °C (°F) ambient temperature measurement
Infrared measurement range -40 °C … 350 °C (-40 °F … 662 °F)
Ambient temperature measurement range -10 °C … 60 °C (14 °F … 140 °F)
Relative humidity measurement range 20 % … 90 % rH
Dew point indicator -20 ° C… 60 ° C
دقت مادون قرمز t 1 °C (-10 °C … 60 °C); t 1.5 °C (< 10 °C and > 60 °C) or t 1.5 % whichever value is greater
Ambient temperature accuracy t 2 °C
Relative humidity accuracy t 3٪
Infrared resolution 0.1 ° C
Relative humidity resolution 1%
Dew point resolution 1 ° C
ضریب انتشار Adjustable, 0.10 … 0.99
دمای عملیاتی 0 ° C… 40 ° C
دمای ذخیره سازی -20 ° C… 70 ° C
نورشناسی 8:1 (distance: measured spot)
طول موج لیزر 650 نانومتر
نوع لیزر Class 2, < 1 mW
منبع تغذیه Type 9 V E block battery

General safety instructions.
Attention: Do not look directly into the laser beam! The laser may not get into the hands of children! Do not point this device unnecessarily toward persons.Laserliner Condense Spot XP - warning

دستورالعمل های اتحادیه اروپا و دفع
Laserliner Condense Spot XP - ce
این دستگاه با تمام استانداردهای لازم برای جابجایی آزاد کالا در اتحادیه اروپا مطابقت دارد.
این محصول یک دستگاه الکتریکی است و طبق دستورالعمل اروپا در مورد ضایعات تجهیزات الکتریکی و الکترونیکی باید به طور جداگانه برای دفع جمع آوری شود.
اخطارهای ایمنی و تکمیلی بیشتر در: www.laserliner.com/info
CondenseSpotLaserliner Condense Spot XP - CondenseSpot

Laserliner Condense Spot XP - iconSERVICE
Umarex GmbH & Co KG
– لیزر لاینر –
Möhnestraße 149، 59755 Arnsberg، آلمان
تلفن: +49 2932 638-300، فکس: +49 2932 638-333
[ایمیل محافظت شده]
Umarex GmbH & Co KG
دونرفلد 2
59757 آرنسبرگ، آلمان
تلفن: +49 2932 638-300، فکس: -333
www.laserliner.com
Laserliner - logoLaserliner Condense Spot XP - ce

اسناد / منابع

Laserliner Condense Spot XP [pdf] راهنمای کاربر
Condense Spot XP

پیام بگذارید

آدرس ایمیل شما منتشر نخواهد شد.