Rosewill Neon S75 Wireless Mechanical Gaming Keyboard User Manual

1. مقدمه

This manual provides detailed instructions for the setup, operation, and maintenance of your Rosewill Neon S75 Wireless Mechanical Gaming Keyboard. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Image: The Rosewill Neon S75 Wireless Mechanical Gaming Keyboard, showcasing its 75% layout and RGB backlighting.

The Rosewill Neon S75 is an 80-key mechanical keyboard featuring a gasket mount design and hot-swappable sockets for customization. It offers versatile tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired) and is compatible with Windows and macOS operating systems. The keyboard is equipped with a 6000mAh battery for extended wireless use.

2. راه اندازی

2.1 محتویات بسته

• Rosewill Neon S75 Wireless Mechanical Gaming Keyboard
• کابل USB-C
• گیرنده بی سیم 2.4 گیگاهرتز
• جمع کننده کلید / جمع کننده سوئیچ (ممکن است با هم ترکیب شوند)
• راهنمای کاربر

۴.۱ شارژ کردن صفحه کلید

Before initial use, fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port (e.g., computer, USB wall adapter). The RGB lighting may indicate charging status.

Image: Illustration highlighting the keyboard's 6000mAh high-capacity lithium battery for extended use.

۵.۱ حالت‌های اتصال

The Neon S75 supports three connection modes: Bluetooth 5.0, 2.4GHz wireless, and USB-C wired.

Image: Diagram illustrating the three connection modes: Bluetooth 5.0, 2.4GHz wireless, and USB-C wired.

2.3.1 اتصال بلوتوث

1. سوئیچ روی کیبورد را به حالت بلوتوث تغییر دهید.
2. را فشار دهید Fn + Q, Fn + W، یا Fn + E برای انتخاب کانال بلوتوث. کلید مربوطه چشمک می‌زند که نشان‌دهنده حالت جفت‌سازی است.
3. On your device (PC, Mac, mobile), search for Bluetooth devices and select "Rosewill Neon S75".
4. Once connected, the key will stop flashing. You can pair up to three devices and switch between them using Fn + Q/W/E.

۳.۲.۲ اتصال بی‌سیم ۲.۴ گیگاهرتز

1. Toggle the switch on the keyboard to 2.4GHz wireless mode.
2. Insert the 2.4GHz USB receiver into an available USB port on your computer.
3. صفحه کلید باید به طور خودکار متصل شود. در غیر این صورت، را فشار دهید Fn + R برای شروع جفت شدن

۳.۲.۱ اتصال سیمی USB-C

1. Toggle the switch on the keyboard to wired mode.
2. Connect the USB-C cable from the keyboard to your computer. The keyboard will function as a wired device and charge simultaneously.

3. دستورالعمل های عملیاتی

3.1 توابع اساسی

• کلید تنظیم صدا: Rotate clockwise to increase volume, counter-clockwise to decrease. Press to mute/unmute.
• ترکیب کلیدهای Fn: The Fn key is used in combination with other keys for various functions (e.g., media control, lighting adjustments, system switching). Refer to the keycap legends for specific functions.
• سوئیچینگ سیستم: Use the dedicated hotkey to switch between Windows and macOS compatibility modes.

نور پس زمینه 3.2 RGB

The keyboard features customizable RGB backlighting. Use Fn key combinations to cycle through various lighting effects, adjust brightness, and change speed.

Image: The Rosewill Neon S75 keyboard displaying various dynamic RGB lighting effects.

۵.۳ نرم‌افزار قابل برنامه‌ریزی

Custom software is available for advanced customization of key assignments and lighting effects. This software is compatible with Windows systems only.

Image: The Rosewill Neon S75 keyboard on a desk, indicating support for programmable software.

4. تعمیر و نگهداری

4.1 تمیز کردن

• قبل از تمیز کردن، کیبورد را از تمام منابع تغذیه جدا کنید.
• کمی d از یک پارچه نرم و بدون پرز استفاده کنیدampبا آب یا یک محلول تمیزکننده ملایم، کلاهک کلیدها و شاسی را پاک کنید.
• For deeper cleaning, use a keycap puller to remove keycaps and compressed air to clear debris from underneath.

۴.۴ سوئیچ‌های قابل تعویض در حین کار

The Neon S75 features hot-swappable sockets, allowing you to change mechanical switches without soldering.

Image: Illustration demonstrating the hot-swappable feature of the keyboard, allowing for easy switch replacement.

1. Use the provided switch puller tool to carefully remove the desired switch. Grip the switch firmly and pull straight up.
2. پین‌های سوئیچ جدید را با سوراخ‌های روی برد مدار چاپی تراز کنید. مطمئن شوید که پین‌ها صاف هستند.
3. Gently press the new switch into place until it clicks. Do not force it to avoid bending pins.

5 عیب یابی

• صفحه کلید پاسخ نمی‌دهد: Ensure the keyboard is charged. Check the connection mode switch (wired, 2.4GHz, Bluetooth) and verify the cable or receiver is properly connected. For Bluetooth, re-pair the device.
• کلیدها ثبت نمی‌شوند: If specific keys are not working, try replacing the switch for that key, as the keyboard is hot-swappable. Ensure the switch is fully seated.
• مشکلات نورپردازی RGB: Cycle through lighting effects using Fn key combinations. If the issue persists, ensure the keyboard is fully charged or connected via USB-C.
• اتصال بی‌سیم ۲.۴ گیگاهرتز ناپایدار است: Ensure the receiver is in a clear line of sight to the keyboard and away from other wireless interference sources. Try a different USB port.
• خطای جفت شدن بلوتوث: Ensure the keyboard is in pairing mode (Fn+Q/W/E key flashing). Remove previous pairings from your device and try again.

6. مشخصات

7. گارانتی و پشتیبانی

7.1 اطلاعات گارانتی

The Rosewill Neon S75 Wireless Mechanical Gaming Keyboard comes with a 1-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use.

7.2 Customer Support and Software

For technical support, driver downloads, or additional product information, please visit the official Rosewill support channels. You can also find software and other resources by scanning the QR code below or visiting the provided link.

Image: A QR code that links to Rosewill product-related information, including software downloads.

Link for product information and software: https://linktr.ee/qr/1a3cb565-bba3-4354-8e08-7a0e511ff85b