AM ARROWMAX Smart Mini Electric Engraving Pen & Carving Bits User Manual

1. مقدمه

This manual provides essential instructions for the safe and effective use of your AM ARROWMAX Smart Mini Electric Engraving Pen and its accompanying carving bits. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. محصول تمام شدview

2.1 محتویات بسته

• AM ARROWMAX Smart Mini Electric Engraving Pen (SGS PRO)
• کابل شارژ مغناطیسی
• 30 Engraving Bits
• 12 Polishing Bits
• کیس ذخیره سازی
• راهنمای کاربر

This image displays the complete AM ARROWMAX Smart Mini Electric Engraving Pen kit, including the pen, its protective case, a USB charging cable, a variety of engraving and polishing bits, and an illustration of its smart app connectivity.

2.2 مولفه های کلیدی

این تصویر جزئیات دقیقی را ارائه می‌دهد view of the SGS MAX engraving pen, labeling its key components: the Magnetic Charging Port for easy charging, the Status Display showing battery, mode, and rotation direction, the Power Button for control, the durable Aluminium Alloy Body, and the Chuck for bit changes.

• پورت شارژ مغناطیسی: For convenient and secure charging of the device.
• نمایش وضعیت: Shows battery level, selected speed mode, and rotation direction.
• دکمه پاور: Controls power on/off and mode selection.
• بدنه آلیاژ آلومینیوم: Provides durability and a comfortable grip.
• دور انداختن: Securely holds engraving and polishing bits.

2.3 Engraving and Polishing Bits

The kit includes a comprehensive set of 30 engraving bits and 12 polishing bits, designed for various materials and applications. These bits feature a 2.35mm shank for compatibility.

This image showcases the comprehensive set of 30 engraving bits and 12 polishing bits that come with the ARROWMAX engraving pen, designed for various crafting tasks.

This detailed diagram categorizes and names various engraving bit types, including sharp needle, torch, oval, spherical, bullet, round tipped needle, ladder, round headed cylinder, flat headed cylinder, and inverted ladder types, providing clarity on their specific uses.

This image focuses on the construction of an engraving bit, emphasizing its Diamond Steel material for long life and precise cuts, and its 2.35mm shank with surface blasting for compatibility with most rotary tools.

3. راه اندازی

3.1 شارژ کردن دستگاه

1. Connect the magnetic charging cable to the charging port on the engraving pen.
2. Connect the other end of the USB cable to a compatible 5V USB power adapter (not included).
3. The status display will indicate the charging progress. Ensure the device is fully charged before first use.

3.2 Attaching/Changing Bits

1. Ensure the engraving pen is powered off.
2. Gently insert the desired engraving or polishing bit into the chuck until it is seated firmly.
3. To remove a bit, pull it straight out from the chuck. No additional tools are required.

4. دستورالعمل های عملیاتی

4.1 روشن/خاموش

Press and hold the Power Button for a few seconds to turn the device on or off.

۵.۴ تنظیم حالت‌های سرعت

The engraving pen features 5 RPM modes for precise control:

This diagram illustrates the five adjustable speed modes of the engraving pen: 'A' for Auto Sensing (10000-30000 RPM), '1' for Low (15000 RPM), '2' for Medium (20000 RPM), '3' for High (25000 RPM), and '4' for Maximum (30000 RPM).

• Mode A (Auto Sensing): Automatically adjusts speed between 10,000-30,000 RPM based on your twist angle.
• حالت ۱ (پایین): 15,000 دور در دقیقه
• حالت ۲ (متوسط): 20,000 دور در دقیقه
• حالت ۳ (زیاد): 25,000 دور در دقیقه
• Mode 4 (Maximum): 30,000 دور در دقیقه

To change the speed mode, short press the Power Button while the device is on. The status display will show the current mode.

۵.۳ تغییر جهت چرخش

The device supports both forward and reverse rotation. To toggle the direction, press the dedicated direction button (if available, otherwise refer to the specific model's controls) or follow the instructions on the status display. This allows for greater flexibility in engraving and polishing tasks.

4.4 Engraving and Polishing Tips

• Always wear appropriate eye protection during operation.
• Select the correct bit for your material and desired effect.
• Start with a lower speed setting and gradually increase as needed.
• Apply light, consistent pressure. Excessive force can damage the bit or the workpiece.
• Practice on scrap material before working on your final project.
• Ensure your workpiece is securely held to prevent movement during operation.

5. تعمیر و نگهداری

5.1 تمیز کردن دستگاه

• قبل از تمیز کردن، مطمئن شوید که دستگاه خاموش و از شارژر جدا شده است.
• Wipe the body of the engraving pen with a soft, dry cloth.
• Use a small brush or compressed air to remove dust and debris from the chuck area.
• از مواد شیمیایی خشن یا پاک کننده های ساینده استفاده نکنید.

5.2 Bit Care

• Clean bits after each use to remove material residue.
• Store bits in their designated case to prevent damage and loss.
• Replace worn or damaged bits to maintain optimal performance and safety.

5.3 مراقبت از باتری

• از خالی شدن کامل باتری به طور مکرر خودداری کنید.
• دستگاه را در زمانی که از آن استفاده نمی کنید در جای خشک و خنک نگهداری کنید.
• اگر برای مدت طولانی باتری را انبار می‌کنید، هر چند ماه یکبار آن را تقریباً تا ۵۰٪ شارژ کنید.

6 عیب یابی

۷.۱ روشن نشدن دستگاه

• Ensure the battery is charged. Connect the device to the charger and check the status display.
• Press and hold the Power Button firmly for a few seconds.

6.2 Bit Not Holding Securely

• مطمئن شوید که مته کاملاً داخل سه نظام قرار گرفته است.
• Check if the bit shank is damaged or bent. Use only bits with a 2.35mm shank.

6.3 Poor Engraving/Polishing Performance

• Verify that the correct speed mode is selected for the material.
• Check if the bit is worn or dull. Replace if necessary.
• Ensure you are applying appropriate pressure; too much or too little can affect results.

7. مشخصات

8. اطلاعات ایمنی

Always adhere to the following safety guidelines when using the engraving pen:

• محافظت از چشم: همیشه از عینک ایمنی یا محافظ چشم استفاده کنید تا از چشمانتان در برابر ذرات معلق در هوا محافظت شود.
• حوزه کاری: Ensure your work area is well-lit and well-ventilated. Keep it clean and free of clutter.
• قطعه کار ایمن: Always secure the material you are working on to prevent it from moving unexpectedly.
• Proper Bits: Use only bits designed for the specific task and material.
• اجتناب از آب: Do not operate the device near water or in damp شرایط
• کودکان و حیوانات خانگی: دستگاه و تمام لوازم جانبی آن را دور از دسترس کودکان و حیوانات خانگی نگه دارید.
• Unplug Before Changing: Always ensure the device is powered off and disconnected from the charger before changing bits or performing maintenance.
• جلوگیری از گرمای بیش از حد: If the device feels excessively hot, stop use and allow it to cool down.

9. گارانتی و پشتیبانی

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact ARROWMAX customer service directly. Keep your purchase receipt as proof of purchase.