COLAMY XK01

COLAMY Ergonomic Mesh Office Chair XK01-Black User Manual

Model: XK01-Black

1. مقدمه

Thank you for choosing the COLAMY Ergonomic Mesh Office Chair, Model XK01-Black. This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new office chair. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

The COLAMY XK01-Black is designed for comfort and support, featuring an adjustable headrest, 4D armrests, adjustable lumbar support, height adjustment, a 4-position tilt lock, and a sliding seat. It incorporates breathable mesh fabric and high-density molding foam for a superior seating experience.

COLAMY Ergonomic Mesh Office Chair XK01-Black, front view, indicating 300 lbs weight capacity.

تصویر 1.1: جلو view of the COLAMY Ergonomic Mesh Office Chair XK01-Black, highlighting its 300 lbs weight capacity.

2. اطلاعات ایمنی

  • Ensure all components are securely fastened before use. Regularly check and tighten screws.
  • روی صندلی نایستید.
  • در صورت آسیب دیدن یا مفقود شدن هر یک از قطعات صندلی، از آن استفاده نکنید. برای تعویض قطعات با پشتیبانی مشتری تماس بگیرید.
  • در حین تنظیم، کودکان را از قطعات متحرک دور نگه دارید.
  • The maximum weight capacity for this chair is 300 lbs (136 kg). Do not exceed this limit.
  • برای جلوگیری از واژگونی، صندلی را روی سطح صاف قرار دهید.

3. محتویات بسته

Before assembly, verify that all parts are present. The package should include:

  • Backrest with Headrest
  • مونتاژ بالشتک صندلی
  • دسته صندلی (چپ و راست)
  • سیلندر بالابر گاز
  • پایگاه ستاره
  • چرخ‌ها (۵ عدد)
  • لوازم نصب (پیچ، واشر)
  • ابزار مونتاژ (آچار آلن)

4. دستورالعمل مونتاژ

Assembly typically takes 15-20 minutes. Follow the included graphical instructions for detailed steps. A general overview در زیر ارائه شده است:

  1. چرخ‌ها را به پایه وصل کنید: پنج چرخ را در سوراخ‌های انتهای هر پایه پایه ستاره‌ای قرار دهید تا زمانی که محکم در جای خود قرار گیرند.
  2. بالابر گازی را وارد کنید: سیلندر بالابر گازی را در سوراخ مرکزی پایه ستاره‌ای قرار دهید.
  3. دسته صندلی را به صندلی وصل کنید: Secure the armrests to the underside of the seat cushion assembly using the provided screws. Ensure they are oriented correctly (left and right).
  4. پشتی صندلی را به آن وصل کنید: Connect the backrest to the seat cushion assembly using the designated screws.
  5. قسمت بالایی مونتاژ شده را روی بالابر گازی قرار دهید: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center mechanism aligns with the top of the gas lift. Apply gentle downward pressure to secure.

The assembly tool (Allen wrench) is included for your convenience. Ensure all screws are tightened firmly but do not overtighten.

5. دستورالعمل های عملیاتی

Your COLAMY Ergonomic Mesh Office Chair offers multiple adjustments to customize your seating experience. Familiarize yourself with these features for optimal comfort and ergonomic support.

Diagram showing various adjustable features of the COLAMY Ergonomic Mesh Office Chair: Adjustable Headrest, Adjustable Lumbar Support, 4D Armrests, Seat Glide Knob, Height Adjustment/Tilt Tension Knob, Tilt Lock Knob.

تصویر 5.1: تمام شدview of the chair's adjustable features.

Close-up of the adjustable headrest mechanism, showing vertical and pivot adjustments.

Image 5.2: Detail of the adjustable headrest.

5.1. تنظیم ارتفاع صندلی

To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at your desired height.

5.2. Tilt Lock and Tension Adjustment

Diagram illustrating the chair's recline angles (107° to 132°) and controls for seat depth adjustment, recline and lock, and tilt tension knob.

Image 5.3: Recline angles and adjustment controls.

  • شیب قفل: The chair features a 4-position tilt lock. To recline, push the lever on the left side of the chair outwards. To lock the recline position, push the lever inwards at your desired angle.
  • کشش شیب: The round knob located under the seat, at the front, controls the tilt tension. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

5.3. Seat Slide Adjustment

To adjust the seat depth, locate the knob on the left side, beneath the seat (often labeled 'Seat Glide Knob'). Pull the knob out, slide the seat forward or backward to your preferred depth, and then push the knob back in to lock the seat in place. This helps ensure proper back support and reduces pressure behind the knees.

5.4. تنظیم پشتیبانی کمر

Close-up of the adjustable lumbar support mechanism on the chair's backrest, showing vertical adjustment.

Image 5.4: Detail of the adjustable lumbar support.

The lumbar support can be adjusted vertically to align with the natural curve of your lower back. Gently slide the lumbar support pad up or down on the backrest to find the most comfortable position.

۵.۵ تنظیم پشتی سر

The headrest offers both height and angle adjustments. To adjust the height, grasp the headrest and slide it up or down. To adjust the angle, pivot the headrest forward or backward to support your neck comfortably.

۵.۴ تنظیم دسته صندلی دوبعدی

Close-up of a 4D armrest, illustrating its four directions of adjustment: height, forward/backward, pivot, and side-to-side.

Image 5.5: Detail of the 4D armrest adjustments.

The 4D armrests can be adjusted in four directions:

  • قد: Press the button on the side of the armrest and slide it up or down.
  • جلو عقب: پد دسته صندلی را به جلو یا عقب بکشید.
  • محور: پد دسته صندلی را به چپ یا راست بچرخانید.
  • پهلو به پهلو: Slide the armrest pad inwards or outwards.

Adjust the armrests to support your arms and shoulders comfortably, ideally keeping your elbows at a 90-degree angle to your desk.

6. تعمیر و نگهداری

Regular maintenance helps preserve the appearance and functionality of your COLAMY office chair.

  • تمیز کردن: با تبلیغ پاک کنیدamp cloth. For mesh and fabric areas, use a mild soap solution if necessary, and blot dry. Avoid harsh chemicals or abrasive cleaners.
  • سخت افزار: Periodically check all screws and bolts to ensure they are tight. Re-tighten as needed to prevent wobbling or instability.
  • کاستورها: Keep casters free of hair, dust, and debris to ensure smooth rolling. You may occasionally need to remove casters for thorough cleaning.
  • بالابر گاز: The gas lift is a sealed unit and requires no maintenance. If it fails to hold height, contact customer support.

7 عیب یابی

اگر با صندلی خود با مشکلاتی مواجه شدید، به مشکلات و راه‌حل‌های رایج زیر مراجعه کنید:

مشکلعلت احتمالیراه حل
صندلی لق می‌زند یا ناپایدار استپیچ‌های شل یا مونتاژ ناهموار.Check and tighten all assembly screws, especially those connecting the seat to the mechanism and the backrest. Ensure the chair is on a level surface.
Gas lift does not hold heightFaulty gas lift cylinder.Contact customer support for a replacement gas lift cylinder.
Difficulty reclining or locking tiltTilt mechanism obstruction or incorrect tension.Ensure the tilt lock lever is fully engaged or disengaged. Adjust the tilt tension knob to your preference. Check for any obstructions under the seat.
Armrests move too easily or are wobblyInternal mechanism wear or loose components.While 4D armrests offer flexibility, excessive looseness may indicate an issue. Check the screws securing the armrests to the seat. If the internal mechanism is too loose, contact customer support.
چرخ‌ها روان نمی‌چرخندآوار در چرخ‌ها گیر افتاده است.صندلی را برگردانید و هرگونه مو، گرد و غبار یا خرده ریزه را از روی چرخ‌های چرخان پاک کنید.

8. مشخصات

Detailed specifications for the COLAMY Ergonomic Mesh Office Chair XK01-Black:

Diagram showing product dimensions: 18.5 inches backrest width, 44.29-51.38 inches total height, 19.68 inches seat width, 28.94 inches base width, 15.75-17.72 inches seat depth, 16.73-21.06 inches seat height, 22.95-30.83 inches arm height.

تصویر ۶.۱: ابعاد محصول بیش ازview.

ویژگیمشخصات
نام تجاریکولامی
نام مدلXK01
رنگXk01-black
ابعاد محصول17.72 اینچ × 28.94 اینچ × 51.38 اینچ
سبک پشتمش
ویژگی های خاص4D Arm Rest, Adjustable Headrest, Adjustable Lumbar, Adjustable Seat Depth, Back Support
دستورالعمل های مراقبت از محصولپاک کن
حداکثر وزن توصیه شده300 پوند
موارد استفاده توصیه شدهدفتر
اجزای شاملکستر
حرکت پایه مبلمانچرخشی
ارتفاع صندلی۴.۰ تا ۶.۹ اینچ
مواد را پر کنیدفوم
سبک کوسنمموری فوم
ارتفاع بازو۴.۰ تا ۶.۹ اینچ
تعداد موقعیت درازکش4 موقعیت
عرض پشتی صندلی18.5 اینچ
وزن مورد46 پوند
مونتاژ مورد نیاز استبله

9. گارانتی و پشتیبانی

COLAMY is committed to providing high-quality products. For warranty information, replacement parts, or any questions not covered in this manual, please contact COLAMY customer support through their official webسایت یا خرده فروشی که محصول از آنجا خریداری شده است.

لطفاً مدرک خرید خود را برای ادعاهای گارانتی نگه دارید.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.