Subminimal NanoFoamer Pro Gen-2 Instruction Manual

مقدمه

Welcome to the world of cafe-quality microfoam at home with your new Subminimal NanoFoamer Pro Gen-2. This device is engineered to produce smooth, velvety microfoam for your coffee beverages, suitable for both dairy and plant-based milks. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

اطلاعات مهم ایمنی

• قبل از استفاده از دستگاه تمام دستورالعمل ها را بخوانید.
• Do not immerse the electrical base or cord in water or other liquids. The jug is IPX-5 splash-resistant, but the electrical base is not.
• از جلد اطمینان حاصل کنیدtagرتبه‌بندی الکترونیکی دستگاه با منبع تغذیه محلی شما مطابقت دارد.
• دور از دسترس کودکان نگهداری شود. این دستگاه برای استفاده افراد دارای ناتوانی جسمی، حسی یا ذهنی در نظر گرفته نشده است.
• همیشه وقتی از دستگاه استفاده نمی کنید و قبل از تمیز کردن، آن را از پریز برق جدا کنید.
• از هیچ وسیله ای با سیم یا دوشاخه آسیب دیده یا پس از خرابی یا آسیب دیدگی دستگاه استفاده نکنید.
• فقط از پیوست های توصیه شده یا فروخته شده توسط سازنده استفاده کنید.
• از تماس با قطعات متحرک خودداری کنید.
• در فضای باز استفاده نکنید.
• روی یا نزدیک مشعل گازی یا برقی داغ یا در فر گرم شده قرار ندهید.
• از دستگاه برای چیزی غیر از استفاده مورد نظر استفاده نکنید.

محصول تمام شده استview

The NanoFoamer Pro Gen-2 is designed for ease of use and superior microfoam production. Key features include an impeller height adjuster, splash resistance, and optimized temperature control.

Figure 1: NanoFoamer Pro Gen-2 overview, highlighting smooth microfoam and compatibility with dairy and plant-based milks.

اجزای کلیدی:

• NanoFoamer Pro Jug: The main vessel for heating and frothing milk.
• پایگاه قدرت: Provides power and heating to the jug.
• پروانه: The rotating component that creates microfoam.
• Impeller Height Adjuster: Allows fine-tuning of the impeller's position.
• Flow Controllers: Interchangeable inserts (Black, Blue, Green) to adjust aeration for different milk types.
• درب: Transparent lid with a secure seal.

راه اندازی

1. باز کردن بسته: تمام اجزاء را با دقت از بسته بندی خارج کنید.
2. تمیز کردن: Before first use, wash the NanoFoamer Pro jug, lid, and impeller with warm soapy water. Rinse thoroughly and dry. Do not immerse the power base in water.
3. پایه برق را قرار دهید: Position the power base on a stable, flat, heat-resistant surface near a power outlet.
4. اتصال برق: Plug the power cord into the power base and then into a suitable electrical outlet.
5. پروانه را وارد کنید: Ensure the impeller is securely placed inside the jug.
6. Choose Flow Controller: Select the appropriate flow controller for your milk type (see 'Operation' section for guidance) and place it inside the jug.

عملیات

The NanoFoamer Pro Gen-2 offers precise control over your microfoam. Follow these steps for optimal results:

1. Choosing a Flow Controller

Flow controllers tweak the spinning vortex to adjust for varying viscosities of milk types. Experiment to find which best suits your milk.

Figure 2: Flow controllers for different milk types. Black for dairy, blue and green for milk alternatives.

• Black (Slow Flow): Recommended for dairy milk. This prevents excessive aeration on easy-to-foam milk types.
• Blue (Medium Flow): A good starting point for plant-based milks.
• Green (Fast Flow): For plant-based milks that require more aggressive aeration.

Fine-Tuning Flow Controller:

Figure 3: Guidance for adjusting flow controllers based on aeration and microfoaming results.

• During Aeration Stage: If milk is not aerating enough, switch to a faster flow controller (e.g., from Black to Blue, or Blue to Green) to open up the vortex and allow more air in.
• During Microfoaming Stage: If you hear rips of aeration or too much foam, try a slower flow controller (e.g., from Green to Blue, or Blue to Black) to close up the vortex.

2. Adjusting Impeller Height (Ultrafine Tuning)

The revolutionary impeller height adjuster allows you to raise or lower the impeller by 0.4mm with each click. This fine-tunes the vortex for the ideal magnetic balance, making even tricky milk alternatives manageable.

Figure 4: Adjusting the impeller height for ultrafine tuning of the microfoam.

• Lower the impeller for tiny drinks.
• Raise it for milk alternatives.

3. انتخاب یک برنامه

Choose from 5 different programs depending on the size of your drink and your desired foam thickness.

Figure 5: New features of NanoFoamer Pro Gen-2, including finer microfoam and hotter drinks.

• The NanoFoamer Pro Gen-2 features improved vortex control and reduced aeration times on programs 1 & 2 for even finer foam on smaller drinks.
• The final milk temperature has been raised by 9°F (5°C), reaching up to 158°F (70°C) for hotter beverages.

۵. کف کردن شیر

1. Pour milk into the jug, ensuring it is below the 'MAX' fill line.
2. درب را محکم روی پارچ قرار دهید.
3. پارچ را روی پایه برق قرار دهید.
4. Press the power button to select your desired program. The device will begin frothing automatically.
5. Once the program is complete, the device will stop. Carefully remove the jug from the base.
6. Pour your perfectly frothed milk into your coffee.

Figure 6: Pouring microfoam from the NanoFoamer Pro Gen-2. Synchronize milk frothing with espresso preparation for optimal results.

نظافت و نگهداری

Regular cleaning ensures the longevity and performance of your NanoFoamer Pro Gen-2.

نظافت روزانه:

1. فوراً بشویید: After each use, rinse the jug, lid, and impeller under running water. This prevents milk residue from drying and sticking.
2. Wash Jug: The NanoFoamer Pro Gen-2 jug is IPX-5 splash-resistant. It can be safely cleaned under running water. Use a soft sponge and mild detergent if necessary.
3. Clean Impeller and Flow Controller: Remove the impeller and flow controller and wash them thoroughly.
4. خشک: قبل از مونتاژ مجدد یا نگهداری، مطمئن شوید که تمام قطعات کاملا خشک شده اند.

Figure 7: The NanoFoamer Pro Gen-2 is IPX-5 splash-resistant for easy cleaning under running water.

نکات مهم:

• Never fully submerge the electrical power base in water.
• Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface and internal components.
• The upgraded seal engineering and thicker heat diffuser minimize milk residue, making cleaning quick and effortless.

عیب یابی

مشخصات

• مدل: NFPRO-02-BL-US
• برند: زیر حداقل
• مواد: فولاد ضد زنگ
• وزن مورد: 1.9 پوند
• ابعاد بسته بندی: 9.49 x 7.6 x 5.59 اینچ
• مقاومت در برابر آب: IPX-5 (Jug only)
• حداکثر دما: تا 158 درجه فارنهایت (70 درجه سانتیگراد)

گارانتی و پشتیبانی

Subminimal provides a limited warranty for this product against defects in materials and workmanship under normal use. For specific warranty terms, registration, or technical support, please visit the official Subminimal webبه سایت مراجعه کنید یا با خدمات مشتریان تماس بگیرید. رسید خرید خود را به عنوان مدرک خرید نگه دارید.