مقدمه
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your anwickjeff Twin Daybed. This daybed is designed with integrated storage drawers, a convenient charging station featuring USB ports and power outlets, and customizable RGB LED lighting. Please read these instructions carefully and thoroughly before beginning assembly or using the product to ensure safe and correct operation.
دستورالعمل های ایمنی مهم
- Always follow assembly instructions precisely. Ensure all bolts and screws are securely tightened before use.
- Do not exceed the maximum weight capacity of 330 lbs (approximately 150 kg) for the daybed.
- Use only an 8-inch thick mattress for optimal fit and safety.
- برای جلوگیری از خطر خفگی، کودکان را در حین مونتاژ از قطعات کوچک دور نگه دارید.
- Ensure the power cord for the charging station and LED lights is properly connected and routed to avoid tripping hazards or damage.
- قطعات الکتریکی را در معرض آب یا رطوبت بیش از حد قرار ندهید.
- به طور دورهای تمام اتصالات و بستها را بررسی کنید تا از محکم و ایمن بودن آنها اطمینان حاصل شود.
محتویات بسته
قبل از مونتاژ، بررسی کنید که تمام قطعات ذکر شده در زیر موجود و بدون آسیب باشند. در صورت مفقود شدن یا آسیب دیدن هر قطعه، لطفاً با پشتیبانی مشتری تماس بگیرید.
- Daybed Frame Components (Headboard, Side Panels, Bed Slats, Support Legs)
- ۴ کشوی ذخیرهسازی
- 1 x Charging Station Module (pre-installed in headboard)
- 1 x RGB LED Light Strip (pre-installed in headboard)
- ۱ عدد کنترل از راه دور LED
- سخت افزار مونتاژ (پیچ، مهره، واشر، آچار آلن)
- راهنمای دستورالعمل
راه اندازی و مونتاژ
Assembly typically requires two adults. Please ensure you have adequate space and all tools provided before starting.
- باز کردن بستهبندی و شناسایی قطعات: تمام قطعات را با دقت از بستهبندی خارج کنید. آنها را روی یک سطح تمیز و نرم قرار دهید تا از خراشیدگی جلوگیری شود. برای اطمینان از وجود همه اقلام، به لیست قطعات مراجعه کنید.
- مونتاژ قاب اصلی: Connect the side panels to the headboard and footboard using the provided hardware. Do not fully tighten screws until the frame is stable.
- نصب نردههای تخت خواب: Securely attach the bed slats to the frame. This daybed does not require a box spring.
- Attach Headboard Features: The charging station and RGB LED light strip are pre-installed in the headboard. Ensure all internal connections are secure.
- Install Storage Drawers: Insert the two storage drawers into the designated spaces beneath the daybed frame. Ensure the wheels are properly aligned for smooth operation.
- سفت شدن نهایی: Once the entire frame is assembled and stable, go back and fully tighten all screws and bolts.
- اتصال برق: سیم برق را از جایگاه شارژ بالای تخت به یک پریز برق استاندارد وصل کنید.

دستورالعمل های عملیاتی
ایستگاه شارژ
The integrated charging station in the headboard provides convenient power access. It includes 2 standard AC outlets and 2 USB ports.
- Ensure the daybed's main power cord is plugged into a live wall outlet.
- Plug your electronic devices into the available USB ports or AC outlets for charging.

نورپردازی LED RGB
The RGB LED light strip offers customizable ambient lighting with 16 color options, adjustable brightness, and various dynamic modes.
- Use the provided remote control to power the lights on/off, change colors, adjust brightness, and select dynamic lighting effects.
- اطمینان حاصل کنید که کنترل از راه دور دارای باتری های در حال کار است.
- The lights can also be controlled via a mobile application (refer to the specific app instructions if applicable, not provided in this manual).

کشوهای ذخیره سازی
The two spacious storage drawers are designed for easy access and organization.
- Gently pull the drawer handles to open. The drawers are equipped with smooth gliding wheels for effortless movement.
- Push the drawers back into place until they are flush with the daybed frame.

مراقبت و نگهداری
- مراقبت از اثاثه یا لوازم داخلی: The PU leather upholstery should be dry cleaned only. For minor spills, gently wipe with a clean, damp پارچه را تمیز کرده و بلافاصله خشک کنید. از مواد شیمیایی قوی خودداری کنید.
- تمیز کردن قاب: Wipe the wooden and metal parts of the frame with a soft, dry cloth.
- تعمیر و نگهداری کشو: Periodically check the drawer wheels and tracks for debris. Clean as needed to ensure smooth operation.
- اجزای الکتریکی: مطمئن شوید که اتصالات ایستگاه شارژ و چراغ LED محکم هستند. سعی نکنید خودتان قطعات الکتریکی را تعمیر کنید؛ با پرسنل متخصص تماس بگیرید.
- بررسی سخت افزار: Every few months, inspect all bolts and screws and tighten them if necessary to maintain the daybed's stability.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| چراغهای LED روشن نمیشوند یا رنگشان تغییر نمیکند. | No power; remote control battery low; loose connection. | Ensure daybed is plugged in. Replace remote control batteries. Check LED strip connections in the headboard. |
| Charging station (USB/outlets) not working. | No power; loose internal wiring. | Verify the daybed's main power cord is securely plugged into a functional wall outlet. If issue persists, contact support. |
| Storage drawers are difficult to open/close. | Obstruction in tracks; wheels dirty or damaged. | Clear any objects from the drawer tracks. Clean wheels and tracks. Ensure drawers are properly aligned. |
| Daybed feels unstable or wobbly. | قطعات مونتاژ شل. | Retighten all bolts and screws on the frame. Ensure the daybed is on a level surface. |
مشخصات محصول
- مدل: Twin Size Daybed-AWD
- اندازه: دوقلو
- مواد: Engineered Wood, PU Leather
- ابعاد کلی محصول (طول x عرض x ارتفاع): ۵.۹ اینچ در ۱۱.۸ اینچ در ۱۴.۶ اینچ
- ظرفیت وزنی: 330 پوند (150 کیلوگرم)
- ضخامت تشک توصیه شده: ۶ اینچ (تشک شامل نمیشود)
- ایستگاه شارژ: ۴ پریز برق، ۲ پورت USB
- روشنایی LED: RGB, 16 Colors, Adjustable Brightness
- ذخیره سازی: 2 Under-bed Drawers
- مونتاژ مورد نیاز: بله
- UPC: 782365754476
- Color (this variant): White+PU+Twin
- کشور مبدا: چین
گارانتی و پشتیبانی
For warranty information, technical support, or to report missing/damaged parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: anwickjeff