مقدمه
The Kiprim WM01 Pinless Wood Moisture Meter is an essential tool designed for non-destructive moisture content measurement across various materials. This digital humidity testing device provides accurate and reliable readings for wood, drywall, concrete, masonry, and more, helping users identify potential moisture issues without damaging surfaces.
ویژگی های محصول
- Pinless & Non-Destructive Testing: Safely measure moisture content without damaging surfaces, ideal for wood, walls, and concrete.
- چهار حالت اندازهگیری: Tailored modes for softwood, hardwood, walls, and masonry ensure precise readings across various materials.
- High Precision & Depth Detection: Detects moisture levels up to 40mm deep with an accuracy of ±4%RH, ensuring consistent and reliable results.
- One-Key Data Hold Function: Conveniently locks measurement data with a single press for easy reference and recording.
- Audible Alerts with Mute Option: Customize your measurements with sound notifications for wet conditions, or mute for silent operation in quiet environments.
- طراحی بادوام: Built with wear-resistant mats and a robust sensor to withstand tough usage conditions.
محتویات بسته
- 1 x Kiprim WM01 Moisture Meter
- 1 x دفترچه راهنمای کاربر
- 1 کیسه حمل
- باتری 1 9 XNUMX ولت
تفصیلی بیش ازview of Functional Parts
- Moisture Content Level Icon: Indicates the general moisture level (Dry, Mid, Wet).
- نماد وضعیت باتری: شارژ فعلی باتری را نمایش میدهد.
- Measurement Mode Display: Shows the currently selected material mode (WALL, MASONRY, SOFT WOOD, HARD WOOD).
- نمایش مقدار اندازهگیری: Digital readout of the moisture percentage.
- دکمه روشن/خاموش: دستگاه را روشن یا خاموش میکند.
- Measurement Mode Selection Button (M): Cycles through the different material modes.
- Mute/Hold Button (H): Toggles audible alerts and activates data hold.
- نماد نگه داشتن: وقتی عملکرد نگهداری داده فعال باشد، ظاهر میشود.
- Moisture Level Bar Display: Graphical representation of moisture content.
- Abrasion Resistant Mats: Located on the back for smooth, non-damaging contact with surfaces.
- Measurement Sensor Area: The primary area on the back of the device that detects moisture.
- Moisture Content Table: Reference table on the back of the device for moisture level interpretation.
- محفظه باتری: در پشت برای نصب باتری قرار دارد.
راه اندازی
1. نصب باتری
The Kiprim WM01 Moisture Meter requires one 9V battery (included). To install the battery:
- محفظه باتری را در پشت دستگاه پیدا کنید (به شکل 2 مراجعه کنید).
- درپوش محفظه باتری را باز کنید.
- باتری ۹ ولتی را وارد کنید و از قطبهای صحیح (ترمینالهای + و -) اطمینان حاصل کنید.
- درپوش محفظه باتری را محکم ببندید.
The device is now ready for use. If the low battery indicator appears on the display, replace the battery promptly.
دستورالعمل های عملیاتی
1. روشن/خاموش
را فشار دهید دکمه روشن/خاموش (center button) to power the device on. The LCD display will illuminate. To power off, press and hold the On/Off Button for approximately 2 seconds.
2. انتخاب حالت
The Kiprim WM01 offers four measurement modes for different materials. Press the Mode Selection Button (M) برای گشت و گذار در حالتهای موجود:
- دیوار: For general wall materials like drywall and plaster.
- سنگ تراشی: For brick, concrete, and other masonry materials.
- چوب نرم: For softwoods such as pine, fir, and spruce.
- چوب سخت: For hardwoods such as oak, maple, and birch.
3. Taking Measurements (Pinless Operation)
The WM01 uses non-destructive pinless technology. To take a measurement:
- Select the appropriate material mode using the Mode Selection Button (M).
- Place the back of the meter, specifically the Measurement Sensor Area, flat against the surface of the material you wish to measure. Ensure full contact for accurate readings.
- درصد رطوبتtage will be displayed on the LCD screen. The moisture level bar display and the Dry/Mid/Wet indicators will also provide a visual representation of the moisture level.
۶. عملکرد نگهداری داده
برای ثابت کردن اندازهگیری فعلی روی صفحه نمایش، دکمه Mute/Hold Button (H) once. The "HOLD" icon will appear on the screen. Press the button again to release the hold and resume live measurements.
5. Audible Alerts and Mute Option
The meter provides audible alerts when high moisture levels are detected. To toggle the audible alert sound on or off, press and hold the Mute/Hold Button (H) for 2 seconds. The speaker icon on the display indicates the current sound status.
6. Measurement Depth
The Kiprim WM01 can detect moisture levels up to 40mm (1.57 inches) deep. For optimal accuracy, the ideal measurement thickness is between 20-40mm (0.78-1.57 inches).
Measurement Modes and Interpretation
The meter provides visual and audible indications of moisture levels. Refer to the table below for general guidelines on moisture content for each mode:
| سطح رطوبت | دیوار | سنگ تراشی | چوب نرم | چوب سخت |
|---|---|---|---|---|
| خشک | < 8٪ | < 13٪ | < 12٪ | < 12٪ |
| میانه | 8-12٪ | 13-21٪ | 12-26٪ | 12-16٪ |
| خیس | ≥ 12٪ | ≥ 21٪ | ≥ 26٪ | ≥ 16٪ |
ملاحظات مهم
- اشیاء فلزی: Avoid measuring areas with metallic concrete, steel bars, wires, or other metal objects inside the wall, as these can significantly affect the accuracy of the readings.
- قرار دادن دست: Keep your hands away from the sensor area on the back of the device during measurement to ensure precise readings.
- وضعیت سطح: Ensure the surface is clean and free of superficial water before taking measurements.
- Material Density: The manufacturer does not recommend using the meter on gypsum walls, as the low density of the material may lead to less precise readings.
فیلم های محصول
Moisture Meter for Drywall
This video demonstrates the use of a moisture meter for detecting moisture in drywall, highlighting its effectiveness in identifying damp مناطق
Fast, Non-Destructive Moisture Detection
This video showcases the MT28C moisture meter's fast and non-destructive capabilities for large and delicate surfaces, demonstrating its ease of use.
Pinless Wood Moisture Meter Demonstration
A demonstration of a pinless wood moisture meter, showing how it measures moisture content in various wood types without causing damage.
Pinless Wood Moisture Meter Usage
This video illustrates the practical application of a pinless wood moisture meter for quick and efficient moisture detection.
تعمیر و نگهداری
- تمیز کردن: دستگاه را با یک پارچه نرم و خشک پاک کنید. از پاک کننده ها یا حلال های ساینده استفاده نکنید.
- ذخیره سازی: Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the battery if the device will not be used for an extended period.
- تعویض باتری: Replace the 9V battery when the low battery indicator appears on the display to ensure accurate operation.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| نمایشگر وجود ندارد/دستگاه روشن نمیشود | باتری خراب یا به درستی نصب نشده است. | قطبهای باتری را بررسی کنید یا با یک باتری ۹ ولتی جدید جایگزین کنید. |
| قرائت های نادرست | Incorrect mode selected, metallic interference, hand on sensor, or dirty sensor area. | Ensure correct mode is selected. Avoid metallic objects. Keep hands clear of sensor. Clean sensor area. |
| آلارم صوتی کار نمی کند | عملکرد بیصدا فعال است. | Press and hold the 'H' button for 2 seconds to deactivate mute. |
مشخصات
- مدل: WM01
- نوع اندازه گیری: Pinless, Non-Destructive
- عمق اندازهگیری: تا 40 میلی متر
- دقت: ± 4٪ RH
- حالت های اندازه گیری: Wall, Masonry, Soft Wood, Hard Wood
- نمایش: LCD دیجیتال با نور پس زمینه
- منبع تغذیه: ۱ عدد باتری ۱۲ ولتی (شامل میشود)
- وزن مورد: 109 گرم
- ابعاد بسته: 18 × 7.5 × 4.4 سانتی متر
- سازنده: Shenzhen Kepurui Business Co.,Ltd.
گارانتی و پشتیبانی
Kiprim offers a 2-year warranty for the WM01 Moisture Meter. If you encounter any product problems or concerns, please contact customer support via email at support@kiprim.com. We aim to provide the best solution within 24 hours.