Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight

مقدمه

This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight. This energy-efficient LED downlight offers versatile lighting solutions with its rotatable design and selectable color temperature feature. Please read these instructions thoroughly before installation and retain them for future reference.

ویژگی های کلیدی:

• 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using the switch on the junction box.
• Rotatable Gimbal: Features 360° rotation and 90° tilt for precise light direction.
• کم نور: Compatible with most standard LED dimmers, offering a dimmable range of 10-100%.
• Canless Design: No separate housing required; installs directly into the ceiling with spring clips.
• CRI بالا: 90 CRI for accurate color rendering.
• رتبه بندی آی سی: مناسب برای تماس مستقیم با عایق
• Damp رتبه بندی: Ideal for various indoor environments including bathrooms and kitchens.

اطلاعات ایمنی

هشدار: خطر آتش سوزی یا برق گرفتگی.

• نصب باید توسط یک برقکار واجد شرایط مطابق با تمام قوانین برق ملی و محلی انجام شود.
• قبل از نصب یا سرویس، برق را از طریق کلید قطع جریان قطع کنید.
• اطمینان حاصل کنید که همه اتصالات ایمن و به درستی عایق بندی شده اند.
• Do not modify or alter the fixture.
• This fixture is designed for 120VAC circuits only.
• Do not use with dimmers not specifically designed for LED lighting.

محتویات بسته

• 1x Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight (Model MRL-S20555B)
• 1x Remote Junction Box with CCT Select Switch
• Foam Gasket (pre-installed for air-tight application)

Image: The Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight, showing the main light fixture with spring clips and the connected remote junction box.

مشخصات

راه اندازی و نصب

1. منطقه نصب را آماده کنید:

   Turn off power at the circuit breaker before beginning installation. Ensure the ceiling area is clear of obstructions and suitable for recessed lighting.

2. Cut the Ceiling Opening:

   Using a hole saw, cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure the hole is clean and smooth.

   

   تصویر: از بالا به پایین view of the recessed light, highlighting the spring clips used for installation.

3. Connect Wiring to Junction Box:

   Open the remote junction box. Connect the household electrical wires (live, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.

   

   Image: The back of the recessed light, showing the wire connecting to the junction box and the spring clips.
4. انتخاب دمای رنگ (CCT):

   Before closing the junction box and installing it into the ceiling, use the CCT selector switch located on the side of the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).

   

   Image: A close-up of the remote junction box, clearly showing the 5-position CCT selector switch for choosing light color.

5. Place Junction Box:

   Once wiring is complete and CCT is selected, close the junction box and place it inside the ceiling cavity, ensuring it rests securely on a ceiling beam or is otherwise supported.
6. Install the Downlight:

   Push the spring clips on the downlight upwards and insert the fixture into the ceiling opening. Release the clips to secure the downlight flush against the ceiling. The foam gasket will ensure an air-tight seal.

   

   Image: An installed Maxxima recessed light in a ceiling, demonstrating the adjustable gimbal feature.

7. بازیابی برق:

   Once installation is complete, restore power at the circuit breaker and test the light.

دستورالعمل های عملیاتی

• روشن/خاموش برق: Control the light using a standard wall switch or dimmer switch connected to the circuit.
• Adjust Color Temperature (CCT): The CCT is set during installation via the switch on the junction box. To change the CCT, power must be turned off at the breaker, the fixture removed, and the switch on the junction box adjusted.
• تمیز کردن: If connected to a compatible LED dimmer, adjust the dimmer switch to achieve the desired brightness level (10-100%).
• تنظیم جهت نور: The gimbal mechanism allows for 360° rotation and 90° tilt. Gently push or pull the inner light module to rotate it or tilt it to direct the light as needed.


Image: A Maxxima recessed light demonstrating its full range of rotation and tilt, allowing for flexible light direction.

تعمیر و نگهداری

• تمیز کردن: قبل از تمیز کردن، مطمئن شوید که برق قطع است. وسایل را با یک پارچه نرم، خشک یا کمی زبر پاک کنید.amp پارچه از پاک کننده ها یا حلال های ساینده استفاده نکنید.
• بدون قطعات قابل سرویس توسط کاربر: منبع نور LED یکپارچه است و قابل تعویض نیست. سعی نکنید آن را باز یا تعمیر کنید.

عیب یابی

گارانتی و پشتیبانی

This Maxxima product is backed by a 3 سال گارانتی از تاریخ خرید این ضمانت نقص در مواد و طرز کار در استفاده معمولی را پوشش می دهد.

For technical support, warranty claims, or further assistance, please visit the official Maxxima webسایت یا با بخش خدمات مشتریان آنها تماس بگیرید. می‌توانید اطلاعات و محصولات بیشتر را در فروشگاه مکسیما در آمازون.