1. مقدمه
The Topyond M6C LCD Electric Bicycle Display is designed to provide clear and essential riding information for your e-bike. It features a large screen for easy readability, a waterproof connector for durability in various weather conditions, and compatibility with a range of electric bicycles and scooters. This manual provides detailed instructions for installation, operation, and maintenance.
محتویات بسته:
- 1 x Topyond M6C Electric Bicycle Display Meter
- 1 x کتابچه راهنمای دستورالعمل
Image 1.1: The Topyond M6C LCD Electric Bicycle Display and its control unit.
2. مشخصات
This section details the technical specifications of the Topyond M6C LCD Electric Bicycle Display.
- نوع مورد: Electric bicycle display
- مواد: ABS
- وزن: Approximately 0.2 Kilograms (201g/7.1oz)
- جلدtage: Default label 36V (compatible with 24V, 36V, 48V, 60V systems)
- محدوده قطر نصب: 22.5mm (0.89in), 25.4mm (1in), 28.6mm (1.1in)
Image 2.1: Diagram illustrating the compatible installation diameter ranges for the display.
3. نصب و راه اندازی
Proper installation is crucial for the display's functionality and your safety. Follow these steps carefully.
۳.۱ نصب نمایشگر
- Select an appropriate position on your e-bike handlebars.
- Ensure the handlebar diameter is within the supported range: 22.5mm, 25.4mm, or 28.6mm.
- Securely attach the display bracket to the handlebar using the provided fasteners.
Image 3.1: The M6C display mounted on an e-bike handlebar, showing its position relative to the rider.
3.2 اتصال سیم کشی
The display uses a waterproof connector. Ensure connections are firm and correctly aligned.
| Order Line | Color of Line | تابع |
|---|---|---|
| 1 | قرمز (VCC) | Meter wire |
| 2 | آبی (K) | Meter wire |
| 3 | مشکی (GND) | سیم ارت متر |
| 4 | سبز (RX) | خط دریافت اطلاعات کنتور |
| 5 | زرد (TX) | Meter data sending line |
توجه: Some product lead wires use waterproof connections. The internal wire colors may not be visible to the user.
تصویر ۲: نمای نزدیک view of the waterproof connector, highlighting its design for durability.
Image 3.3: The rear of the display unit, showing the voltage label (e.g., 36V).
4. عملیات
This section explains how to use the Topyond M6C display and its various functions.
4.1 مقدمه کلیدی
The display features control buttons for various functions. Operations are categorized into short presses, long presses, and composite key presses.
Image 4.1: A close-up of the control buttons, typically located on a separate unit for easy access.
عملکردهای فشار کوتاه:
- During Riding: Short press to modify power/speed file.
- Toggle Display Data: Short click to cycle through multi-function display areas.
- Switch Mode/State: Single key short press is primarily used for this purpose.
- تنظیم مقدار: Short press to switch the value in multi-function display areas.
عملکردهای فشار طولانی:
- کنترل چراغ جلو: Long press to turn headlights on or off.
- Speed Display Toggle: Long press to switch speed display.
- 6KM/H Cruise: From a static state, long press to enter 6KM/H cruise mode. Release to exit.
- روشن/خاموش صفحه: If the display is working, long press to turn the screen off. Long press again to turn it on.
Composite Key Presses (Long Press Combinations):
Used for setting parameters to prevent accidental changes.
- P1 Menu Interface: Long press for five seconds to enter the P1 menu.
- ODO Clear Zero: Long press for five seconds in the P1 menu to clear ODO.
- بازیابی تنظیمات کارخانه: برای بازگرداندن تنظیمات کارخانه به مدت 10 ثانیه فشار دهید.
۳.۱ اطلاعات نمایش داده شده
The M6C display provides comprehensive data at a glance:
- نمایش سرعت: Maximum Speed (MAX), Average Speed (AVG) in MPH or KM/H.
- نمایش سطح قدرت: سطح فعلی باتری
- نشانگر قدرت: Visual representation of power output.
- هشدار خرابی: Icons for various system faults.
- مسافت پیموده شده: Total Mileage (ODO), Single Mileage (TRIP A, TRIP B).
- Headlight Display: Indication when headlights are active.
- Single Running Time Display: Duration of current ride.
- باتری جلدtage (VOL) & Current (CUR): حجم باتری بلادرنگtage و جریان.
- Gear Indication: Current PAS (Pedal Assist System) level (0-9).
- حالت دوچرخه سواری: Walk boost mode, Cruise constant speed mode.
4.3 Parameter Settings (P01-P22)
Access these settings via composite key presses to customize your display and e-bike behavior.
- P01: Backlight Brightness: 1 (darkest) to 3 (brightest).
- P02: Mileage Unit: 0 (KM), 1 (MILE).
- P03: جلدtagسطح e: 24V, 36V, 48V, 60V, 64V (default 36V).
- P04: Dormancy Time: 0 (no dormancy), 1-60 minutes.
- P05: کمک کنید File (PAS Gear Mode): 0 (3-file), 1 (3-mode), 2 (9-gear mode).
- P06: Wheel Diameter: Unit in inches.
- P07: Speed Magnetic Steel Number: 1-100.
- P08: Speed Magnetic Steel Number Range: 1-100.
- P09: Start Mode: 0 (Zero start), 1 (Non-zero start).
- P10: Drive Mode: 0 (Power Drive), 1 (Electric Drive via throttle).
- P11: Help Sensitivity: 1-24 (PAS sensitivity, high to low).
- P12: Help Start Intensity: 1-5 (PAS start protection, low to high).
- P13: Power Magnetic Steel Setting: 5, 8, 10, 12, 15, 18, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 84, 88, 92, 96, 100.
- P14: Controller Limit Value: Default 12A (range 1-20, higher value increases current).
- P15: Controller Under Voltage: حجم کمtagارزش حفاظتی e
- P16: ODO Zero Setting: Long press key 5 seconds to clear ODO. Long press 10 seconds to restore factory settings.
- P17: Cruise Function: 0 (No enabling), 1 (Enabling cruising - automatic cruise optional for protocol 2 only).
- P18: Display Speed Ratio Adjustment: 50% - 150%.
- P19: Power Bit: 0 (0 file), 1 (does not include 0 file).
- P20: Protocol: 0 (1.5.5 Protocol), 1 (Protocol 2), 2 (Standby), 3 (Standby).
- P21: Throttle Gear Control: 0 (Instrument control), 1 (Full throttle, no gear, discrimination).
- P22: E-ABS Braking: 0 (No E-ABS), 1 (E-ABS regenerative braking when power off brake).
5. عیب یابی و کدهای خطا
The display provides error codes to help diagnose potential issues with your e-bike system.
5.1 eVehicle Status Display Area
Icons on the display indicate the status of various components: Battery, Motor, Controller, Turn Signal, and Communication.
5.2 Fault Icons and Meanings
- زیر جلدtagتقصیر e: Indicates low battery voltage.
- خطای موتور: مشکل از موتور.
- Turn the fault: Issue with the turn signal system.
- Controller fault: Problem with the e-bike controller.
- Communication failures: Issue with data communication between components.
5.3 Vehicle Status Code Meaning
| کد وضعیت (اعشاری) | معنی دولت | اظهارات |
|---|---|---|
| E00 | عادی | No errors detected. |
| E02 | ترمز | Brake lever engaged or fault. |
| E06 | باتری تحت جلدtage | حجم باتریtage خیلی کم است |
| E07 | خرابی موتور | مشکل از موتور. |
| E08 | چرخش بد کار می کند | Issue with turn signal. |
| E09 | خرابی کنترلر | Problem with the e-bike controller. |
| E10 | Meter data receiver failure | Display not receiving data. |
| E11 | Meter data sender failure | Display not sending data. |
6. تعمیر و نگهداری
To ensure the longevity and optimal performance of your Topyond M6C LCD display, follow these maintenance guidelines:
- تمیز کردن: صفحه نمایش و بدنه را با یک پارچه نرم و لطیف پاک کنید.amp پارچه. از استفاده از پاککنندههای ساینده یا حلالهایی که میتوانند به صفحه نمایش یا ... آسیب برسانند، خودداری کنید.asing.
- اتصال دهنده ضد آب: While the connector is waterproof, avoid submerging the display in water. Ensure the connector is free from dirt and debris to maintain a secure connection.
- ذخیره سازی: When not in use for extended periods, store the e-bike and display in a dry, cool place away from direct sunlight and extreme temperatures.
- بازرسی کابل: Periodically check all cables and connections for any signs of wear, damage, or loose connections.
7. گارانتی و پشتیبانی
For warranty information, technical support, or any questions regarding your Topyond M6C LCD Electric Bicycle Display, please refer to the product packaging or contact Topyond customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.