Topyond Electric Bike Controller Kit User Manual

1. مقدمه

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Topyond Electric Bike Controller Kit. This kit includes a 36V/48V 500W brushless motor controller, an 805 half throttle handle with an integrated LCD panel, and a lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. اطلاعات ایمنی

• Always disconnect the battery before performing any installation, maintenance, or repair work on the electric bike system.
• مطمئن شوید که تمام اتصالات محکم و عایق‌بندی مناسبی دارند تا از اتصال کوتاه جلوگیری شود.
• Do not attempt to modify the controller or any components of the kit. Unauthorized modifications can lead to malfunction, damage, or injury.
• Keep the controller and electrical components away from water and excessive moisture.
• اگر در مورد هر یک از مراحل نصب مطمئن نیستید، با یک تکنسین واجد شرایط مشورت کنید.

3. محتویات بسته

تأیید کنید که تمام اجزای ذکر شده در زیر در بسته شما موجود است:

• 1 x 36V/48V 500W Brushless Motor Controller
• 1 x 805 Half Throttle Handle with LCD Panel and Lock
• 2 x Keys for Throttle Lock
• 2 x Handlebar Grips
• سیم‌کشی و اتصالات

شکل 3.1: تمام شده استview of the Topyond Electric Bike Controller Kit components.

شکل 3.2: دیگری view of the complete kit contents.

4. راه اندازی و نصب

Follow these steps for installing the electric bike controller kit. Ensure the bike's power is off and the battery is disconnected before starting.

1. کنترلر را سوار کنید: Secure the brushless motor controller to a suitable location on your electric bike frame. The metal housing features a notch design for heat dissipation, so ensure adequate airflow around it.
2. Install the Throttle Handle: The 805 half throttle handle is designed to fit a standard 22.5mm handlebar. Slide the throttle onto the right side of the handlebar and secure it. Install the accompanying grip on the left side.


Figure 4.1: The 805 half throttle handle with LCD display and key lock.

3. سیم کشی را وصل کنید: Carefully connect the wiring harness from the throttle to the controller. The controller has various color-coded connectors for the motor, battery, throttle, and other accessories. Match the connectors according to their type and color. Refer to the wiring diagram provided with your motor or bike for specific connections.

Figure 4.2: The controller showing its multiple wiring connections.
4. اتصال باتری: Connect the controller to your electric bike's 36V or 48V battery. Ensure correct polarity.
5. بررسی های نهایی: Before powering on, double-check all connections for security and proper insulation. Ensure no wires are pinched or exposed.

5. دستورالعمل های عملیاتی

Once installed, operate the electric bike controller kit as follows:

1. روشن کردن: Insert the key into the lock on the throttle handle and turn it to the 'ON' position. The LCD panel will illuminate.

Figure 5.1: Illuminated LCD display on the throttle handle.
2. کنترل دریچه گاز: Gently twist the half throttle handle to engage the motor and control your speed. The controller provides stable speed regulation and sensitive response.
3. ترمز: The system is designed for sensitive response to braking. Apply brakes as usual; the motor will disengage.
4. خاموش: Turn the key to the 'OFF' position to power down the system. Remove the key for security.

۶. عملکردهای نمایشگر LCD

The integrated LCD panel provides essential riding information:

• Real-time Speed: Displays your current riding speed.
• Single Run Mileage: Shows the distance covered in the current trip.
• کل مسافت پیموده شده: Accumulates the total distance traveled by the bike.
• سطح قدرت باتری: میزان شارژ باقی مانده باتری را نشان می‌دهد.
• جلدtagسطوح e: حجم باتری فعلی را نشان می دهدtage.
• هشدار باتری کم: Notifies you when the battery charge is critically low.
• Gear Indication: Shows the current assist level or gear.
• Fault Coding: Displays error codes if a system malfunction occurs. Refer to the troubleshooting section for common codes.

Use the buttons on the LCD panel to navigate through different display modes and settings.

7. تعمیر و نگهداری

Regular maintenance ensures the longevity and optimal performance of your controller kit:

• اتلاف حرارت: The controller's metal housing is designed for efficient heat dissipation. Ensure it remains free from obstructions and dirt to maintain proper cooling.
• تمیز کردن: Periodically clean the controller and throttle handle with a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
• بررسی اتصال: Regularly inspect all electrical connections for tightness and signs of wear or corrosion. Re-secure any loose connections.
• یکپارچگی کابل: Check all cables for cuts, fraying, or damage. Replace damaged cables immediately to prevent electrical hazards.

8 عیب یابی

اگر با مشکلی مواجه شدید، به مراحل عیب‌یابی رایج زیر مراجعه کنید:

For fault codes displayed on the LCD, refer to the specific error code definitions provided by the manufacturer or contact customer support.

9. مشخصات

Key specifications for the Topyond Electric Bike Controller Kit:

10. گارانتی و پشتیبانی

برای اطلاعات مربوط به گارانتی و پشتیبانی فنی، لطفاً به اسناد ارائه شده در زمان خرید مراجعه کنید یا با فروشنده خود تماس بگیرید. رسید خرید خود را به عنوان مدرک خرید نگه دارید.