Anderic RR1004 Big Button TV Remote Control Instruction Manual

مقدمه

The Anderic RR1004 is a universal TV remote control designed for simplicity and ease of use, particularly beneficial for seniors, individuals in assisted living, or anyone seeking a straightforward television control experience. Its large, glow-in-the-dark buttons and minimalist layout reduce complexity, focusing on essential functions for effortless TV operation.

This manual provides comprehensive instructions for setting up, operating, and maintaining your Anderic RR1004 remote control.

ویژگی های کلیدی

Large, Glow-in-the-Dark Buttons: Designed for enhanced visibility and ease of use in various lighting conditions.
Simplified Layout: Features only essential controls (Power, Volume, Channel, Mute, Closed Captioning) to prevent confusion.
Broad IR Compatibility: Works with most standard IR (infrared) TVs, including major brands like LG, Samsung, and Sony.
عملکرد یادگیری: Allows copying functions from an existing IR remote for customized control, such as input or streaming buttons.
Pre-programmed for LG TVs: Ready to use with LG televisions right out of the box.
طراحی بادوام: Built for reliability in various environments, including hospitality and healthcare settings.
Wrist Lanyard Attachment: Provides a convenient way to keep the remote accessible and prevent loss.

محتویات بسته

Anderic RR1004 Big Button TV Remote Control
راهنمای دستورالعمل (این سند)
توجه: ۳ باتری AAA مورد نیاز است و شامل نمی‌شود.

راه اندازی

1. نصب باتری

The Anderic RR1004 remote requires two (2) AAA batteries for operation. Ensure correct polarity when inserting the batteries.

درپوش محفظه باتری را در پشت ریموت کنترل قرار دهید.
برای باز کردن محفظه، درپوش را به سمت پایین بکشید.
دو باتری AAA را وارد کنید، و ترمینال‌های مثبت (+) و منفی (-) را همانطور که در داخل محفظه نشان داده شده است، مطابقت دهید.
درپوش را به جای خود بلغزانید تا محکم کلیک کند.

Back of Anderic RR1004 remote showing battery compartment and wrist lanyard

تصویر: عقب view of the Anderic RR1004 remote control, highlighting the easy-removable battery cover and the small wrist lanyard attachment point. This design helps prevent battery loss and keeps the remote accessible.

Anderic RR1004 remote next to two AAA batteries and dimensions

تصویر: The Anderic RR1004 remote control displayed alongside two AAA batteries, illustrating the battery type required. The image also shows the remote's dimensions: 5.75 inches in length, 2 inches in width, and 1 inch in thickness, emphasizing its compact yet easy-to-handle size.

2. Initial TV Programming

The RR1004 is pre-programmed for LG TVs and may work immediately. For other TV brands, follow the steps below to program the remote.

Automatic Code Search (3-Step Modification)

This method allows the remote to scan through its internal code database to find a compatible code for your TV.

تلویزیون را روشن کنید شما می خواهید کنترل کنید
را فشار داده و نگه دارید قدرت دکمه و CH+ button simultaneously for approximately three seconds. The remote's indicator light will illuminate, signifying it is in programming mode.
While pointing the remote at the TV, press and release either the CH+ or CH- button repeatedly. Each press sends a new code. Stop when the TV turns off.
پس از خاموش شدن تلویزیون، دکمه تنظیم کنید برای ذخیره کد، دکمه را فشار دهید. چراغ نشانگر خاموش خواهد شد.

Test the remote's functions (Power, Volume, Channel). If not all functions work correctly, repeat the process, stopping at a different code when the TV turns off.

Diagram showing 3-step programming for Anderic RR1004 remote

تصویر: A visual guide illustrating the simple 3-step programming process for the Anderic RR1004 remote control. It shows a user pressing the POWER and CH+ buttons, then repeatedly pressing CH+ or CH- to find the correct code for their TV.

Anderic RR1004 remote being used with an LG TV

تصویر: The Anderic RR1004 remote control in use with an LG HDTV, demonstrating its instant plug-and-play setup for LG models. This image highlights the convenience for users with LG televisions, requiring no programming.

3. Learning Function (Copying from Original Remote)

The learning function allows the RR1004 to copy infrared signals from your existing IR remote control. This is useful for adding functions not present on the RR1004, such as an "Input" button or specific streaming service buttons, provided your original remote is IR-based.

مهم: The learning function does not work with RF (Radio Frequency) or Bluetooth remotes. Ensure both remotes have fresh batteries and are pointed directly at each other during the learning process. Perform learning in a low-light environment to avoid interference.

Place the Anderic RR1004 and your original remote control on a flat surface, facing each other, with their IR emitters aligned and approximately 1-2 inches apart.
را فشار داده و نگه دارید تنظیم کنید button on the RR1004 for approximately three seconds until the indicator light illuminates steadily.
Press the button on the RR1004 that you wish to program (e.g., the قدرت button if you want to learn a different power code). The indicator light will flash slowly.
Press and hold the corresponding button on your original remote control (e.g., its Power button). The indicator light on the RR1004 will flash rapidly, then turn solid, indicating successful learning.
مراحل ۳ و ۴ را برای هر دکمه دیگری که می‌خواهید برنامه‌ریزی کنید، تکرار کنید.
After programming all desired buttons, press the تنظیم کنید button on the RR1004 to exit learning mode. The indicator light will turn off.

Test the newly programmed buttons. If a button does not work, repeat the learning process for that specific button.

Anderic RR1004 remote controlling a cable box and TV

تصویر: An illustration showing the Anderic RR1004 remote control connected via a dashed line to a cable box, which in turn is connected to a TV. This demonstrates the remote's capability to control both a TV and a cable box, especially through its learning function for cable box commands.

دستورالعمل های عملیاتی

The Anderic RR1004 remote control features a minimalist design with clearly labeled, large buttons for essential TV functions.

جلو view of Anderic RR1004 Big Button TV Remote Control

تصویر: جبهه‌ای روشن view of the Anderic RR1004 Big Button TV Remote Control, showcasing its large, distinct buttons for Power, Volume Up/Down, Channel Up/Down, Mute, Closed Captioning, and the SET button for programming. The remote is white with green and red buttons, and features a small wrist lanyard.

Anderic RR1004 remote highlighting glow-in-the-dark keys

تصویر: The Anderic RR1004 remote control with a red circle highlighting the glow-in-the-dark keys for Volume, Channel, Mute, and Closed Captioning. This feature enhances accessibility and ease of use in low-light conditions, making it ideal for seniors.

قدرت دکمه: تلویزیون را روشن یا خاموش می کند.
VOL + / VOL- دکمه ها: صدای تلویزیون را کم یا زیاد می‌کند.
CH+ / CH- دکمه ها: کانال تلویزیون را بالا یا پایین عوض می‌کند.
خاموش Button (Speaker with X): صدای تلویزیون را قطع یا وصل می‌کند.
CC دکمه: زیرنویس را فعال یا غیرفعال می‌کند.
تنظیم کنید دکمه: Used for programming the remote control. Not for daily TV operation.

تعمیر و نگهداری

تمیز کردن: کنترل از راه دور را با یک پارچه نرم و خشک پاک کنید. از پاک کننده های مایع یا مواد ساینده استفاده نکنید.
تعویض باتری: Replace batteries when the remote's performance diminishes or the indicator light does not respond. Always replace both AAA batteries simultaneously with new ones.
ذخیره سازی: ریموت کنترل را در جای خشک و خنک و دور از نور مستقیم خورشید و دمای شدید نگهداری کنید.

عیب یابی

مشکل	علت احتمالی	راه حل
ریموت کار نمی کند.	باتری‌ها از کار افتاده‌اند یا به درستی در دستگاه قرار نگرفته‌اند. ریموت کنترل به تلویزیون متصل نیست. Line of sight is blocked.	باتری‌ها را با باتری‌های AAA جدید تعویض کنید و از قطبیت صحیح آنها اطمینان حاصل کنید. Follow the "Initial TV Programming" steps. Ensure no objects are between the remote and the TV's IR sensor.
بعضی از دکمه‌ها بعد از برنامه‌ریزی کار نمی‌کنند.	Incorrect code was saved during automatic search. Learning function failed for specific buttons.	Repeat the "Automatic Code Search" process, stopping at a different code. Repeat the "Learning Function" for the specific non-working buttons, ensuring proper alignment and signal strength.
Learning function does not work.	Original remote is RF or Bluetooth, not IR. Remotes are not aligned correctly or too far apart. Low battery in either remote. Environmental interference (e.g., bright light).	Confirm original remote uses IR technology. Ensure remotes are 1-2 inches apart and IR emitters are aligned. Replace batteries in both remotes. Perform learning in a dimly lit room.

مشخصات

مدل: RR1004
ابعاد: ۳۸.۲ در ۱۷.۵ در ۲.۴ اینچ (طول در عرض در ضخامت)
وزن مورد: 1.76 اونس (بدون باتری)
منبع تغذیه: 2 عدد باتری AAA (شامل نمی شود)
سازگاری: Most IR (Infrared) TVs (LG, Samsung, Sony, etc.)
ویژگی های خاص: Glow-in-the-dark buttons, Learning Function, Simplified Layout
سازنده: Dan's Electronics Etc., Inc.

گارانتی و پشتیبانی

For warranty information or technical support regarding your Anderic RR1004 remote control, please contact the manufacturer, Dan's Electronics Etc., Inc., or refer to the official Anderic webرسید خرید خود را به عنوان مدرک خرید برای هرگونه ادعای گارانتی نگه دارید.

سازنده: Dan's Electronics Etc., Inc.

برای کمک بیشتر، مراجعه کنید Anderic Store on Amazon.

اندریک RR1004