Smart Switch Module ZigBee Avatto ZWSM16-W2 TUYA User Manual

1. مقدمه

This user manual provides detailed instructions for the installation, operation, and maintenance of the AVATTO ZWSM16-W2 ZigBee Smart Switch Module. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. اطلاعات ایمنی

WARNING: Risk of Electric Shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes.

• قبل از نصب یا تعمیر و نگهداری، مطمئن شوید که برق از طریق قطع کننده مدار قطع شده است.
• Do not exceed the maximum load ratings specified for the device.
• این دستگاه فقط برای استفاده در محیط داخلی طراحی شده است.
• دور از دسترس کودکان نگهداری شود.

3. محصول تمام شدview

The AVATTO ZWSM16-W2 is a compact ZigBee smart switch module designed to convert traditional switches into smart switches, allowing for remote control and automation of lighting or other electrical appliances via a ZigBee gateway and a compatible smart home application (e.g., TUYA Smart app).

شکل 1: AVATTO ZWSM16-W2 ZigBee Smart Switch Module. This image shows the compact white module with screw terminals at the bottom and a wiring diagram printed on its top surface. The diagram indicates connections for Line (L), Neutral (N), Load (L1, L2), and switch inputs (S1, S2), along with voltage and max load specifications.

4. مشخصات

5. راه اندازی و نصب

5.1 قبل از شروع

• Ensure you have a ZigBee gateway (hub) compatible with TUYA Smart or Smart Life app.
• Turn off power to the circuit at the main circuit breaker before starting any wiring.
• Confirm you have access to Line (L) and Neutral (N) wires in your switch box.

5.2 نمودار سیم کشی

Refer to the wiring diagram printed on the module and shown in Figure 1 for correct connections. The module supports both single-gang and two-gang switch configurations.

1. L (خط): Connect the live wire (from power supply) to the 'L' terminal.
2. N (خنثی): Connect the neutral wire (from power supply) to the 'N' terminal.
3. L1 (Load 1): Connect the wire going to the first light/appliance to the 'L1' terminal.
4. L2 (Load 2): Connect the wire going to the second light/appliance (if applicable) to the 'L2' terminal.
5. S1 (Switch 1): Connect one end of your traditional wall switch (for Load 1) to the 'S1' terminal. The other end of this switch should be connected to the 'L' (Line) terminal.
6. S2 (Switch 2): Connect one end of your traditional wall switch (for Load 2, if applicable) to the 'S2' terminal. The other end of this switch should also be connected to the 'L' (Line) terminal.

توجه: Ensure all connections are secure and insulated. After wiring, carefully place the module inside the switch box, ensuring no wires are pinched.

5.3 Pairing with ZigBee Gateway

1. Restore power to the circuit at the main circuit breaker.
2. The module will automatically enter pairing mode (indicated by a blinking indicator light, if present, or by rapidly toggling the connected switch 5 times).
3. Open your TUYA Smart or Smart Life app and ensure your ZigBee gateway is online.
4. In the app, select your ZigBee gateway and choose "Add sub-device" or "جستجو برای new devices".
5. Follow the on-screen instructions to complete the pairing process. Once successfully paired, the indicator light on the module (if present) will stop blinking, and the device will appear in your app.
6. If pairing fails, try resetting the module by rapidly toggling the connected switch 5 times, then repeat the pairing steps.

6. Operating the Smart Switch Module

6.1 کنترل دستی

The connected traditional wall switch(es) will continue to function normally, allowing you to turn the lights/appliances on or off manually.

6.2 کنترل برنامه

• Open the TUYA Smart or Smart Life app.
• Navigate to the device list and select your AVATTO ZWSM16-W2 module.
• You can now remotely turn the connected lights/appliances on or off.
• The app also allows for setting schedules, timers, and creating smart scenes with other compatible devices.

6.3 Voice Control (if integrated)

If your TUYA Smart app is integrated with voice assistants like Amazon Alexa or Google Assistant, you can control the module using voice commands after enabling the respective skill/service and discovering devices.

• Exampدستورات le:
  • "Alexa, turn on Living Room Light."
  • "Hey Google, turn off Kitchen Light."

7. تعمیر و نگهداری

• The module requires minimal maintenance.
• Periodically check wiring connections for tightness, especially if you experience intermittent issues.
• Keep the module free from dust and moisture.
• سعی نکنید خودتان ماژول را جدا یا تعمیر کنید. برای خدمات با پرسنل واجد شرایط تماس بگیرید.

8 عیب یابی

9. گارانتی و پشتیبانی

AVATTO products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official AVATTO website. For technical support, please contact your retailer or AVATTO customer service.

AVATTO Official Webسایت: www.avatto.com (توجه: این یک مکان نگهدار است) URLلطفا صحت خبر رسمی را تایید کنید webسایت)