JASTIND Heavy Duty 3-72V Digital LED Automotive Test Light Instruction Manual

1. مقدمه

The JASTIND Heavy Duty 3-72V Digital LED Automotive Test Light is a versatile circuit tester designed for checking various vehicle electrical circuits. It features a wide voltage testing range, digital display, auxiliary lighting, and bidirectional polarity indication, making it suitable for automotive diagnostics and other DC circuit systems.

Figure 1: JASTIND Heavy Duty 3-72V Digital LED Automotive Test Light.

2. ویژگی های محصول

• حجم گستردهtage محدوده تست: Upgraded to 3-72V, suitable for various vehicle electrical circuits like headlights, taillights, fuses, and car batteries. Also measures other 3-72V DC circuit systems.

  Figure 2: The test light supports a wide 3-72V voltage testing range.
• LED Digital Display & Auxiliary Lighting: Features a clear digital display with voltage resolution to 0.1V and accuracy to ±0.2V, visible day and night. Two lighting LED beads illuminate the measured circuit area for convenience in dark conditions.

  Figure 3: Digital display showing voltage readings and auxiliary lighting.

  

  Figure 4: Auxiliary lighting for improved visibility in low-light conditions.
• دو جهته جلدtage Testing & Computer Safe: This tester indicates polarity with two color LED lights and a buzzer. A red light and one beep indicate positive polarity, while a green light and two beeps indicate negative polarity. The precision-designed circuit board minimizes current draw, reducing the risk of damaging sensitive vehicle computer systems.

  Figure 5: Polarity indication with red for positive and green for negative.

• Anti-Lost Probe Protective Tip & Quality Made Tester Body: Features a sharp stainless steel probe for easy wire piercing and access to tight areas. An anti-lost protective cover prevents accidental stabs and ensures the tip is not misplaced. The 142-inch extended spring wire has an anti-tensile PU outer skin and good conductivity copper inner wire, designed for convenience and durability.

  Figure 6: Key components including the extended spring wire, sharp probe, and strong alligator clip.

3. راه اندازی

Before use, ensure the probe protective cover is removed. Connect the alligator clip to a suitable ground or positive terminal of the circuit you intend to test. The test light is designed for 3-72V DC systems.

Figure 7: The test light with its probe protective tip.

4. دستورالعمل های عملیاتی

This section details how to use the JASTIND Digital LED Automotive Test Light for various circuit testing scenarios.

۵.۳ تست قطبیت

The test light provides bidirectional voltage testing with visual and audible indicators.

• Positive Polarity: When the probe touches a positive voltage source, the red LED light will illuminate, and the buzzer will sound once.
• Negative Polarity: When the probe touches a negative voltage source (ground), the green LED light will illuminate, and the buzzer will sound twice.

Video 1: Demonstration of polarity testing and general usage scenarios for the JASTIND Automotive Test Light.

4.2. جلدtage خواندن

The digital display shows the precise voltage reading. For voltages between 3V and 72V, a normal display will appear. For voltages outside this range, the display may be blank (0-3V) or show '---' (above 72V).

Figure 8: Close-up of the digital LED display showing voltage خواندن.

4.3. Fuse Testing

To test fuses, connect the alligator clip to a known good ground point. Carefully touch the probe to the metal contacts on top of the fuse. If the fuse is good, the test light will illuminate and display the voltage. If the fuse is blown, there will be no indication on one or both sides, depending on the circuit configuration.

Figure 9: Using the test light to check automotive fuses.

5. تعمیر و نگهداری

To ensure the longevity and accurate performance of your JASTIND Automotive Test Light, follow these maintenance guidelines:

• تمیز کردن: Wipe the tester body and probe with a clean, dry cloth after each use. Avoid using abrasive cleaners or solvents that could damage the plastic housing or electronic components.
• ذخیره سازی: Always replace the anti-lost probe protective cover when not in use to prevent damage to the probe and ensure user safety. Store the test light in a dry, cool place, away from direct sunlight and extreme temperatures.
• مراقبت از کابل: Avoid sharp bends or kinks in the spring wire. While designed to be anti-tensile, excessive force can damage the internal wiring.

6 عیب یابی

If you encounter issues with your JASTIND Automotive Test Light, consider the following common troubleshooting steps:

• No Display/No Light:
  • Ensure the alligator clip has a secure connection to a good ground (for positive voltage testing) or a positive terminal (for negative voltage testing).
  • Verify that the circuit being tested is within the 3-72V DC operating range. Voltages outside this range may not register.
  • Check for any visible damage to the wire or probe.
• نشانگر قطبیت نادرست:
  • Double-check your connection of the alligator clip. The tester's bidirectional feature relies on the clip being connected to either a known positive or negative reference.
• جلد نادرستtage خواندن:
  • Ensure the probe has good contact with the test point.
  • Verify the battery of the device (if applicable, though this one is powered by the circuit).

اگر مشکل همچنان پابرجا بود، لطفاً برای راهنمایی بیشتر به بخش گارانتی و پشتیبانی مراجعه کنید.

7. مشخصات

8. گارانتی و پشتیبانی

JASTIND is committed to customer satisfaction and product quality. Every product undergoes inspection before shipment. If you have any questions or concerns regarding your Heavy Duty 3-72V Digital LED Automotive Test Light, please contact JASTIND's after-sales service team.

اطلاعات تماس: Please refer to the product packaging or the official JASTIND website for the most current contact details for support and warranty claims.

JASTIND offers quality support and stands behind its products for long-term use.